Dinan 20-26 Toyota GR Supra (A90/A91) Performance Spring Set

Shop coilover springs, replacement coilover coils, ID60 and ID65 sport springs, ERS race springs, QA1 high-travel coilover springs, off-road lift coils, and Jeep coilover replacement springs from Eibach, Swift Springs, Hyperco, QA1, H&R, Vogtland, KW, Ground Control, Rock Krawler, RockJock, ARB / Old Man Emu, and other coilover-spring specialists. Find coilover springs for street/track sport-compact and European coilover platforms (ID60, ID62, ID65, ID70, 2.25 inch, 2.5 inch), race-application ERS springs, off-road lift coils for Wrangler JK/JL/Gladiator/JT/JKU, ARB / OME Toyota Land Cruiser and 4Runner replacement coils, RockJock lift springs, and QA1 high-travel muscle-car coilover coils. Coilover springs are the replaceable coils that wrap the shock body inside a coilover assembly. Swapping the spring changes ride height, spring rate, and the balance between comfort and cornering support without buying a new coilover. Filter by inner diameter (ID), free length, spring rate...

Coilovers and coilover components are stocked at Black Ops Auto Works for trucks, SUVs, muscle cars, and street performance builds. Shop complete coilover kits, coilover springs, lowering springs, shock boots, dampening adjustment extenders, and suspension hardware for Ford, Toyota, Chevrolet, Jeep, Dodge, and Porsche platforms. Every product is filterable by year, make, model, trim, and drivetrain so the correct coilover setup ships the first time. Black Ops Auto Works carries 2,259 coilover and component SKUs across street, off-road, and track categories. What This Collection Covers Coilovers combine a coil spring and a shock absorber into a single adjustable unit, giving control over ride height and, on many models, damping stiffness. This collection also includes the individual components used to service, upgrade, or protect an existing coilover system. Product Categories Complete coilover kits, individual coilover shocks, coilover springs, lowering springs, protective shock...

Shop Dinan intake, exhaust, suspension, ignition, wheel, transmission, and carbon-fiber components at Black Ops Auto Works. Compare vehicle-specific upgrades and service parts for selected BMW applications, along with selected Toyota GR Supra accessories. Choose by the exact Dinan manufacturer part number, vehicle configuration, and installation requirements. Dinan Cold Air Intakes and Turbo Inlet Components Explore carbon-fiber intake systems, replacement filters, and selected turbo inlet fit kits. The collection includes intake applications for BMW 230i, 330i, 430i, M2, M3, M4, X1, and other listed models. Coverage depends on the engine, body style, production period, and exact part number. A replacement filter is a service item for its specified intake; it is not a complete intake kit. Likewise, a turbo inlet fit kit may supply supporting connections rather than the entire intake assembly. Review the package contents and compatibility with factory or previously installed componen...

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...

Find Toyota GR Supra cabin protection, engine bearings and manual-clutch applications using exact engine and transmission details. Separate measured engine-build requirements from street or race clutch choices. B58 Bearings and Oil Clearance Main and connecting-rod bearings serve different locations. Confirm actual engine code, measured journals/housings and the builder’s target clearance before selecting a set. ACL H and HX standard-shaft references do not provide the same oil clearance. HX denotes extra clearance; choose from measured build requirements rather than treating it as an automatic upgrade. Manual Clutches and Cabin Protection ACT Mod-Twin applications require the supported manual transmission, engine, spline and complete release arrangement. Sprung/rigid, street/race and clamp-load choices should follow intended use and the exact kit specification. First-row mats and cargo liners cover different areas. Match production, cabin/load-floor geometry and retention points, a...

Shop Toyota GR Supra exhaust, intake and lighting applications using exact production, engine and current equipment. Compare exhaust resonation and intake interfaces before selecting finish or accessories. Touring, Track and Resonation AWE Touring and Track are separate sound choices; resonated versus non-resonated is an additional configuration decision. Review the existing downpipe and desired cabin sound together. AWE states its system will not fit 2026 Final Editions with factory bracing retained. Confirm the exact vehicle and installation restrictions rather than extending a 2020-on title to every edition. Intake and Accessory Interfaces A 3.0-litre Injen intake/charge-pipe package requires exact engine, sensor and mounting support. Confirm all included pieces and interfaces to the existing charge system. DRL modules need the correct headlamp/electronic application. Wind diffusers and carbon intakes have separate mounting and production requirements; verify each exact part numb...

Find Toyota Supra damper, intake and gauge-accessory applications by generation and actual engine. Keep JZ-engine builds separate from later B58 and other engine references. Damper and Accessory-Drive Configuration Stock-drive, underdrive and dry-sump pulley arrangements serve different builds. Confirm the exact damper, crank attachment, belt layout and supporting external drive requirements. A dry-sump pulley application is not a complete dry-sump oil system. Match the installed engine and build rather than extending JZ or B58 naming across generations. Intake and Interior Applications A naturally aspirated Supra intake needs the exact engine/year, sensor and airbox arrangement. Do not assume it supports a turbo installation or a different engine swap. Gauge pods require correct production, steering position, mounting geometry and gauge-opening size. Review whether gauges/sensors are included or supplied separately. Choose Your Part Identify generation and actual engine/build. Mat...