Dinan Performance Spring Set for 2019 to 2025 BMW 330i, M340i and M440i xDrive

Shop BMW 330i parts by engine generation and body. Earlier six-cylinder cars and later turbocharged four-cylinder models need separate intake, exhaust and service applications. Exhaust Scope and Engine Coverage G2X AWE Touring selections include axle-back exhaust applications with specific production coverage. An axle-back changes the rear portion; compare retained pipework and the exact sections supplied. Check tip finish, bumper-outlet arrangement and mounting before deciding on appearance. An earlier 330i body or engine is a different exhaust application. Intake and Chassis Planning For induction components, compare engine identification, sensor connections and breather fittings. Record the housing if an aftermarket intake is already installed. Select springs and dampers by body, drivetrain and axle loads. Brake components need the installed rotor and caliper application before pad compound and sensor choices are made. Choose Your Part Identify engine, chassis and body. Compare ...

Explore BMW 330i xDrive parts with the exact engine and all-wheel-drive chassis identified. Compare induction connections and AWD suspension requirements as distinct decisions. Intake Selection by Engine Injen 330i intake applications include specified B48 turbocharged engine configurations. Check production coverage, sensor connections and breather fittings before choosing a kit. Compare an open-filter configuration with an enclosed airbox using the actual contents, mounting and filter-service access. A finish choice does not change the application requirements. All-Wheel-Drive Chassis and Exhaust Use xDrive-specific lowering coverage and the correct body, axle loads and damper type. Check front driveline and wheel clearance through the required suspension travel. For exhaust work, compare body routing, mounting and outlet configuration. Identify the current system before choosing a replacement section or conversion component. Choose Your Part Identify engine, generation and body....

Shop BMW M340i parts with the B58 version, body and exhaust configuration identified. Compare complete systems, sound configurations and conversion pieces as different purchases. Exhaust Sound, Resonation and Tips AWE configurations include Touring and Track choices, resonated or non-resonated arrangements and original-tip or quad-tip layouts. Compare the exact system’s sound guidance and supplied components. A resonation conversion or tip conversion needs a compatible starting exhaust. Check the required system and which sections or outlet components are retained before choosing a kit. Lighting and Powertrain Interfaces For a complete headlamp or DRL module, match original lamp technology, connector and production period. A non-laser-only application should not be extended to laser-equipped lamps without explicit coverage. Engine and chassis components need the actual B58 version, drivetrain and body. Match intake connections and suspension equipment separately from the exhaust or ...

Find BMW M340i xDrive parts with the B58 version, body and production details identified. Intake and brake purchases need exact interfaces, while chassis applications must account for AWD. Intake Construction and Service Access Compare enclosed or open intake arrangements by the actual kit’s mounting, filter service access and inlet connections. Finish alone does not identify the application. Match engine version, sensor provisions and required adapters. A related M240i or M440i title needs confirmed coverage for the installed M340i setup. Brake Hardware and AWD Chassis Wear sensors require the correct axle, connector and routing. Match fitting hardware to the caliper and check the pieces supplied separately from pads. Suspension must cover body, xDrive, axle loads and damper equipment. Review front-driveline clearance and permitted travel alongside the intended ride height. Choose Your Part Identify B58 version and AWD body. Compare intake mounting and filter access. Match sensor ...

Explore BMW M440i parts with body, drivetrain and B58 version identified. Exhaust sound configurations, resonation and tip conversions need a compatible starting system. Choose the Exhaust Configuration Compare Touring or Track choices using the exact system’s sound guidance, resonator arrangement and body coverage. Establish whether original tips are retained or replacement outlets supplied. A resonation or tip conversion changes specified components of an existing system. Review the required starting exhaust and supplied sections before ordering it as part of a build. Engine and Body Interfaces Match induction components to engine version, sensors, inlet connections and mounting. Shared M340i/M440i wording still needs explicit application coverage. Body-sensitive exhaust and chassis parts must cover the actual coupe, convertible or Gran Coupe. Record drivetrain, axle loads and damper equipment before suspension changes. Choose Your Part Identify body, drivetrain and B58 version. ...

Find BMW M440i xDrive parts by body, production and B58 version. Compare intake installation details and brake-service contents while retaining exact AWD chassis coverage. Intake Interfaces and Service Access Match the engine version, inlet connections, sensors and mounting before comparing intake construction or finish. Review adapters and hardware supplied with the system. Keep the actual body identified for exhaust and underbody components. Engine compatibility alone does not settle body routing or xDrive clearance. Pads, Hardware and AWD Equipment Brake pads need the installed caliper, rotor material, axle and shape. Compare compound guidance and the hardware pieces included in the specific kit. Sensors need their own connector and routing coverage. Suspension must account for xDrive, body, axle loads and electronic damper or rear-system equipment. Choose Your Part Identify B58 version and AWD body. Compare intake interfaces and supplied adapters. Match brake application and ha...

Shop Dinan intake, exhaust, suspension, ignition, wheel, transmission, and carbon-fiber components at Black Ops Auto Works. Compare vehicle-specific upgrades and service parts for selected BMW applications, along with selected Toyota GR Supra accessories. Choose by the exact Dinan manufacturer part number, vehicle configuration, and installation requirements. Dinan Cold Air Intakes and Turbo Inlet Components Explore carbon-fiber intake systems, replacement filters, and selected turbo inlet fit kits. The collection includes intake applications for BMW 230i, 330i, 430i, M2, M3, M4, X1, and other listed models. Coverage depends on the engine, body style, production period, and exact part number. A replacement filter is a service item for its specified intake; it is not a complete intake kit. Likewise, a turbo inlet fit kit may supply supporting connections rather than the entire intake assembly. Review the package contents and compatibility with factory or previously installed componen...