Click to zoom in
OEM Fit, Trail-Ready Strength: The FBBR-06 Bronco Front Bumper Built for the Long Haul
The DV8 Offroad OE Plus Series V2 Front Bumper transforms the 2021-2025 Ford Bronco front end into a fully armored trail platform without sacrificing daily driveability. Constructed from a combination of 3.5mm and 5mm plate steel, the DVEFBBR-06 delivers serious impact resistance while keeping the factory adaptive cruise control sensor, front camera, and skid plate fully functional. Four three-inch pod light mounts and a 20-inch single or dual-row light bar opening give total lighting flexibility from trail nights to desert running. Paintable mesh accent panels add visual contrast right out of the box, and welded zip tie tabs keep wiring clean and protected behind the bumper. The DVEFBBR-06 is not compatible with factory fog lights.
Key Features
- DVEFBBR-06 built from 3.5mm and 5mm plate steel for heavy-duty impact protection on the 2021-2025 Ford Bronco
- Compatible with the OEM factory skid plate, front camera, and parking sensors on all Bronco trims
- Sensor plugs included for Bronco models without factory front sensors
- Accommodates one 20-inch single or dual-row light bar mount
- Four three-inch auxiliary pod light mounts integrated into bumper wings
- Two front D-ring shackle mounts rated for recovery use with 3/4-inch shackles
- Paintable mesh accent panels included for a customizable appearance
- Welded zip tie tabs for clean and secure wiring management
- ACC-compatible on most trims without requiring a separate relocation bracket
- Micro-texture black powder coat finish
- Bolt-on installation, no cutting or drilling required. Estimated 2.5-hour install
- Not compatible with factory fog lights
Fitment
| Year Range | Make | Model |
|---|---|---|
| 2021-2025 | Ford | Bronco |
Specifications
| Detail | Value |
|---|---|
| Part Number (MPN) | FBBR-06 |
| SKU | DVEFBBR-06 |
| UPC | 810087817978 |
| Brand | DV8 Offroad |
| Material | 3.5mm and 5mm plate steel |
| Finish | Micro-texture black powder coat |
| Light Bar Mount | 20-inch single or dual-row |
| Pod Light Mounts | Four 3-inch mounts |
| D-Ring Mounts | Two integrated recovery points (3/4-inch shackle) |
| Camera Compatible | Yes |
| Sensor Compatible | Yes (plugs included for non-sensor trims) |
| Skid Plate Compatible | Yes, factory skid plate retained |
| ACC Compatible | Yes, no relocation required on most trims |
| Fog Light Compatible | No |
| Installation | Bolt-on, no cutting or drilling |
| Install Time | Approximately 2.5 hours |
| Prop 65 | Yes |
What's Included
- One (1) DVEFBBR-06 OE Plus Series V2 Front Bumper
- Paintable mesh accent panels
- Sensor port plugs for non-sensor equipped Bronco trims
- All mounting hardware
About DV8 Offroad
DV8 Offroad is a Utah-based off-road and overland accessories manufacturer focused on Jeep, Ford Bronco, and Toyota platforms. Known for engineering-driven product development and in-house testing, DV8 produces bumpers, roof racks, skid plates, fender flares, and lighting that are designed for direct OEM fitment with no cutting or welding required. Their bumper lineup spans OE-style low-profile designs like the FBBR-06 through full winch-capable expedition bumpers, all built from heavy-gauge steel.
Related Parts on Our Site
- DV8 Offroad DVEABFF-02 ACC Relocation Bracket -- For Bronco builds using a dual-row light bar that requires moving the adaptive cruise module out of the bumper opening
Frequently Asked Questions
What is the DVEFBBR-06?
The DVEFBBR-06 is the DV8 Offroad OE Plus Series V2 Front Bumper for the 2021-2025 Ford Bronco. Built from 3.5mm and 5mm plate steel, it features integrated light mounts, retains the factory camera and parking sensors, and installs bolt-on in approximately 2.5 hours. Not compatible with factory fog lights.
What years does the DVEFBBR-06 fit?
The DVEFBBR-06 fits 2021 through 2025 Ford Bronco. Compatible with all named trims including Badlands, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Heritage Limited, Outer Banks, Raptor, and Wildtrak.
Does the DVEFBBR-06 work with my factory adaptive cruise control?
Yes. The DVEFBBR-06 is designed to work with the OEM adaptive cruise control sensor on most Bronco trims without requiring a separate relocation bracket. If you want to run a dual-row light bar in the center opening on an ACC-equipped Bronco, you will need the DV8 ACC Relocation Bracket sold separately.
Does the DVEFBBR-06 keep the factory front camera?
Yes. The DVEFBBR-06 is engineered to retain the OEM front camera in its factory position without modification.
What size light bar can I run on the DVEFBBR-06?
The DVEFBBR-06 accommodates a 20-inch single or dual-row light bar and includes four integrated 3-inch pod light mount positions, two per wing.
Do I need to cut or drill for the DVEFBBR-06 installation?
No. The DVEFBBR-06 is a fully bolt-on installation that requires no cutting or drilling. DV8 Offroad estimates the install takes approximately 2.5 hours.
What steel thickness is used in the DVEFBBR-06?
The DVEFBBR-06 uses a combination of 3.5mm and 5mm plate steel throughout its construction for a balance of trail-worthy rigidity and manageable weight.
Does the DVEFBBR-06 come with recovery points?
Yes. The DVEFBBR-06 includes two integrated front D-ring shackle mounts sized for 3/4-inch recovery shackles.
Can the DVEFBBR-06 be painted to match my Bronco?
The DVEFBBR-06 includes paintable mesh accent panels. The main steel bumper body comes finished in micro-texture black powder coat and is not typically painted, but the accent panels can be painted to match or contrast with your Bronco exterior.
Installation Instructions
- Disconnect the vehicle battery before beginning the DVEFBBR-06 installation
- Remove the factory front bumper and fascia components from the 2021-2025 Ford Bronco
- Disconnect and label all factory sensor and camera connectors for reinstallation
- Transfer the factory camera and sensor hardware to the DVEFBBR-06 mounting provisions
- If your Bronco does not have factory sensors, install the included sensor port plugs
- Position the DVEFBBR-06 and align to factory mounting holes
- Fasten all hardware per the included instruction sheet torque specifications
- Route and secure all wiring using the integrated welded zip tie tabs
- Install the paintable mesh accent panels
- Reconnect the battery and verify all sensors and camera function correctly before driving
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Bumpers - Steel
Steel bumpers for trucks and Jeeps are stocked at Black Ops Auto Works. Shop front winch bumpers, rear bumpers, brush guards, and Stealth Fighter and Spec Series steel bumpers for Ford F-150, Ford Super Duty, Ford Bronco, Chevrolet Silverado, GMC Sierra, RAM 1500, RAM 2500, RAM 3500, Toyota Tacoma, Toyota Tundra, Toyota Land Cruiser, and Jeep Wrangler platforms. Every product is filterable by year, make, model, and trim so the correct bumper ships the first time. Black Ops Auto Works carries 455 steel bumper SKUs across front winch bumpers, rear bumpers, and brush guards. What This Collection Covers Steel bumpers replace the factory plastic or lightweight bumper with a heavy-duty design built for off-road protection, winch mounting, and a more aggressive front or rear appearance. This collection spans front winch bumpers, rear bumpers, and standalone brush guards. Front Winch Bumpers Front winch bumpers add a winch mounting plate along with increased approach angle and brush pro...
View Bumpers - Steel Products
Bumpers, Grilles & Guards
Bumpers, grilles, and grille guards for trucks and Jeeps are stocked at Black Ops Auto Works. Shop front and rear bumpers, brush guards, grille inserts, and winch-ready bumper systems built for Chevrolet Silverado, GMC Sierra, Ford F-150, RAM 1500 and RAM TRX, Toyota Tacoma, and Jeep Wrangler and Gladiator. Every bumper and grille guard is filterable by year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 989 bumper, grille, and guard SKUs across steel and aluminum construction, winch-ready mounts, and integrated light bar provisions. What This Category Covers This category includes front bumpers, rear bumpers, grille guards, brush guards, and replacement grille inserts for trucks and Jeeps. Options range from lightly modified factory-style bumpers to full off-road bumpers built for winches, light bars, and trail protection. Front Bumpers Front bumper replacements add clearance for larger tires, integrate winch mounting plates, an...
View Bumpers, Grilles & Guards Products
DV8 Offroad
DV8 Offroad parts for Jeep, Ford Bronco, Toyota, and off road trucks are stocked at Black Ops Auto Works. Shop front and rear bumpers, skid plates, rock sliders, roof racks, MOLLE panels, tire carriers, winches, and light mounts for Jeep Wrangler, Jeep Gladiator, Ford Bronco, Toyota Tacoma, Toyota 4Runner, Toyota Tundra, and RAM applications. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 281 DV8 Offroad SKUs across bumpers, armor, storage, and recovery categories. What This Brand Covers DV8 Offroad builds trail armor and accessories aimed primarily at the Jeep Wrangler and Gladiator platforms, along with growing support for the Ford Bronco and Toyota Tacoma, 4Runner, and Land Cruiser. The lineup covers bumpers, skid plates, rock sliders, storage panels, roof racks, and recovery equipment built for aggressive off road styling and trail durability. Platforms Covered Jeep Wrangle...
View DV8 Offroad Products
Exterior Parts & Accessories
Exterior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop bumpers, grilles, fender flares, running boards, nerf bars, tonneau covers, mud flaps, front lips, splitters, spoilers, diffusers, body kits, carbon fiber panels, roof racks, bed accessories, tow hooks, and car covers for daily drivers, work trucks, and performance builds. Every product is filterable by category, brand, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 9,697 exterior parts SKUs across style, protection, and utility categories. What This Category Covers Exterior parts change how a vehicle looks, protects itself, and hauls gear. Fitment depends on body style, cab and bed configuration, and factory sensor or camera equipment, so confirm compatibility before ordering. Appearance Upgrades Grilles, front lips, splitters, spoilers, diffusers, and body kits update the front end and aero character of a ...
View Exterior Parts & Accessories Products
Ford Bronco Parts & Accessories
Ford Bronco parts and accessories for the 2-door, 4-door, Bronco Raptor, and classic Bronco are stocked at Black Ops Auto Works. Shop lift kits, coilovers, shocks, springs, upper control arms, sway bar drop kits, cold air intakes, turbocharger kits, cat-back exhaust, front and rear bumpers, rock sliders, skid plates, light bars, A-pillar lights, MOLLE storage panels, and brake rotors for the 2.3L, 2.7L, and 3.0L EcoBoost engines. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 824 Ford Bronco SKUs across suspension, off-road protection, lighting, and performance categories. What This Collection Covers The current Ford Bronco lineup spans the 2-door, 4-door, and 3.0L Bronco Raptor, each with different suspension travel, brake sizing, and bodywork, while the classic Bronco from 1980 to 1996 uses its own separate parts pool. This collection groups parts confirmed to fit the correct...
View Ford Bronco Parts & Accessories Products