Click to zoom in
Bolt-On Aluminum Rear Inner Fender Protection for the Jeep Gladiator JT
The DV8 INFEND-07RB Rear Inner Fender Liners replace the exposed rear wheel well area of the 2020-2026 Jeep Gladiator JT with a clean, purpose-built 1.5mm aluminum shield. DV8 engineered the INFEND-07RB to protect the fuel lines, vacuum lines, and other vulnerable components tucked inside the Gladiator's rear inner fender from rock strikes, mud packing, and debris thrown by oversized off-road tires. The liners are finished in a durable satin black powder coat and feature a laser-cut DV8 logo where the Gladiator's factory body color shines through for a distinctive look. Installation is fully bolt-on with no cutting, drilling, or modification required. The INFEND-07RB pairs directly with DV8's front inner fenders for a matched set. Not compatible with EcoDiesel-equipped Gladiator models.
Key Features
- 1.5mm Aluminum Construction: The INFEND-07RB is built from 1.5mm aluminum, providing meaningful impact protection against rocks and trail debris while keeping weight to a minimum compared to steel alternatives
- Protects Vital Rear Components: Specifically designed to shield the fuel lines, vacuum lines, and electrical components in the Gladiator JT rear inner fender compartment from off-road hazards
- Satin Black Powder Coat Finish: The INFEND-07RB is finished in a resilient satin black powder coat that resists corrosion, scratches, and UV degradation for long-term durability in all weather conditions
- Laser-Cut DV8 Logo: A laser-cut DV8 logo in the aluminum panel allows the factory body color to show through for a custom, branded appearance that sets the INFEND-07RB apart from plain fender liners
- Fully Bolt-On, No Cutting Required: The INFEND-07RB is a direct-fit bolt-on installation using existing Gladiator mounting points, with no drilling, cutting, or permanent modification needed
- 3-Year Limited Warranty: DV8 Offroad backs the INFEND-07RB with a 3-year limited warranty against defects in materials and workmanship
This Part Fits
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2020-2026 | Jeep | Gladiator | Sport, Sport S, Willys, Mojave, Rubicon, Overland (non-EcoDiesel) |
Specifications
| Detail | Value |
|---|---|
| Part Number (MPN) | INFEND-07RB |
| SKU | DVEINFEND-07RB |
| Material | 1.5mm Aluminum |
| Finish | Satin Black Powder Coat |
| Location | Rear Inner Fender (pair) |
| Installation | Bolt-On (no drilling or cutting) |
| Install Time | Approximately 2 hours |
| Compatibility Note | Not compatible with EcoDiesel engine models |
| Warranty | 3-Year Limited (DV8 Offroad) |
| Prop 65 | Yes |
What's Included
- Left and right INFEND-07RB rear inner fender liner panels (pair)
- All mounting hardware required for installation
- DV8 installation instructions
About DV8 Offroad
DV8 Offroad designs and manufactures precision-engineered off-road protection and accessory components for Jeep Wrangler, Gladiator, Ford Bronco, and Toyota Tacoma platforms. Based in the United States, DV8 products are validated through real-world off-road testing and are engineered to meet the functional and aesthetic expectations of serious off-road enthusiasts. The INFEND-07RB is part of DV8's complete inner fender lineup for the Gladiator JT platform.
Frequently Asked Questions
What is the DV8 INFEND-07RB?The DV8 INFEND-07RB is the rear inner fender liner set for the 2020-2026 Jeep Gladiator JT. Built from 1.5mm aluminum with a satin black powder coat finish and a laser-cut DV8 logo, these liners protect the Gladiator's rear fuel lines, vacuum lines, and exposed components from rocks and trail debris. Installation is fully bolt-on with no cutting or drilling required.
What years does the INFEND-07RB fit?The DV8 INFEND-07RB fits the 2020 through 2026 Jeep Gladiator JT. It is not compatible with Gladiator models equipped with the EcoDiesel engine option.
Does the INFEND-07RB work with the EcoDiesel Gladiator?No. DV8 explicitly states the INFEND-07RB is not compatible with EcoDiesel-equipped Gladiator JT models. All other Gladiator engine configurations (3.6L Pentastar and 3.0L EcoDiesel excluded) are compatible.
Does INFEND-07RB require drilling or cutting for installation?No. The INFEND-07RB is a direct bolt-on fitment using existing mounting points on the Gladiator JT. No drilling, cutting, or permanent modification is required. DV8 estimates the installation takes approximately 2 hours.
Does the INFEND-07RB pair with DV8 front inner fenders?Yes. DV8 produces front inner fender liners for the Gladiator JT separately (sold individually). The INFEND-07RB rear liners are designed to pair visually and functionally with DV8's front inner fenders for a complete matched set across both axles.
Will the INFEND-07RB clear larger tires on a lifted Gladiator?DV8 notes that tire fitment with the INFEND-07RB depends on the lift height and tire size of your specific build. The liner profile may require verification against your tire size before purchasing if you are running larger-than-stock tires with significant lift.
What warranty does the DV8 INFEND-07RB carry?The INFEND-07RB is backed by DV8's 3-year limited warranty covering defects in materials and workmanship from the original purchase date.
Is the INFEND-07RB powder-coated or painted?The INFEND-07RB is finished in a satin black powder coat, not paint. Powder coating provides superior durability, scratch resistance, and corrosion protection compared to painted finishes, making it well-suited to off-road use.
Installation Instructions
- Safely lift and support the Jeep Gladiator, ensuring the rear axle is accessible and the wheel wells are clear
- Remove the rear wheels on both sides to gain full access to the rear inner fender mounting locations
- Identify and remove any existing OEM plastic inner fender panels or clips in the rear wheel well area
- Dry-fit the INFEND-07RB liner panels to confirm hole alignment with the existing mounting points before final installation
- Install the left INFEND-07RB liner panel using the included hardware, starting from the front mounting point and working rearward. Do not fully torque any fastener until all holes are engaged
- Repeat for the right side liner panel
- Torque all mounting hardware to the specification listed in the DV8 instruction sheet once all fasteners are started
- Reinstall the rear wheels and torque lug nuts to specification
- Lower the vehicle and verify both panels are seated flat against the wheel well with no interference against suspension components
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Body Armor & Protection
Body armor and protection for trucks and Jeeps is stocked at Black Ops Auto Works. Shop rock sliders, skid plates, fender flares, and underbody protection built for Chevrolet Colorado, RAM 1500 TRX, Toyota Tundra and Tacoma, and Jeep Gladiator. These parts guard the frame, fuel tank, transfer case, and rocker panels from rock strikes, brush, and trail debris. Black Ops Auto Works carries 957 body armor SKUs, all filterable by year, make, model, and trim to confirm correct fitment. What This Category Covers Body armor and protection includes rock sliders, skid plates, differential covers, fender flares, and rocker panel guards designed to shield the underside and lower body of a truck or Jeep during off-road driving. This category ranges from bolt-on rock sliders to full underbody skid plate systems. Rock Sliders and Rock Rails Rock sliders bolt or weld to the frame rails beneath the doors, protecting rocker panels from rock strikes while also serving as a step for entry and exit...
View Body Armor & Protection Products
DV8 Offroad
DV8 Offroad parts for Jeep, Ford Bronco, Toyota, and off road trucks are stocked at Black Ops Auto Works. Shop front and rear bumpers, skid plates, rock sliders, roof racks, MOLLE panels, tire carriers, winches, and light mounts for Jeep Wrangler, Jeep Gladiator, Ford Bronco, Toyota Tacoma, Toyota 4Runner, Toyota Tundra, and RAM applications. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 281 DV8 Offroad SKUs across bumpers, armor, storage, and recovery categories. What This Brand Covers DV8 Offroad builds trail armor and accessories aimed primarily at the Jeep Wrangler and Gladiator platforms, along with growing support for the Ford Bronco and Toyota Tacoma, 4Runner, and Land Cruiser. The lineup covers bumpers, skid plates, rock sliders, storage panels, roof racks, and recovery equipment built for aggressive off road styling and trail durability. Platforms Covered Jeep Wrangle...
View DV8 Offroad Products
Exterior Parts & Accessories
Exterior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop bumpers, grilles, fender flares, running boards, nerf bars, tonneau covers, mud flaps, front lips, splitters, spoilers, diffusers, body kits, carbon fiber panels, roof racks, bed accessories, tow hooks, and car covers for daily drivers, work trucks, and performance builds. Every product is filterable by category, brand, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 9,697 exterior parts SKUs across style, protection, and utility categories. What This Category Covers Exterior parts change how a vehicle looks, protects itself, and hauls gear. Fitment depends on body style, cab and bed configuration, and factory sensor or camera equipment, so confirm compatibility before ordering. Appearance Upgrades Grilles, front lips, splitters, spoilers, diffusers, and body kits update the front end and aero character of a ...
View Exterior Parts & Accessories Products
Wheels & Tires
Wheels and tires for cars, trucks, SUVs, Jeeps, and custom builds are stocked at Black Ops Auto Works. Shop forged wheels, flow-formed wheels, cast wheels, truck wheels, off-road wheels, performance tires, all-terrain tires, mud-terrain tires, wheel spacers, hubcentric rings, lug nuts, valve stems, and TPMS sensors for Hellcat, Trackhawk, TRX, Wrangler, F-150, Silverado, and Tacoma platforms. Every product is filterable by bolt pattern, offset, diameter, width, tire size, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 13,150 wheel and tire SKUs across construction types, styles, and sizes. What This Category Covers Wheels and tires change a vehicle's stance, handling, and appearance more than any other single upgrade. Wheel-and-tire fitment is also the modification most affected by measurement accuracy, so confirm bolt pattern, center bore, offset, width, diameter, and fender clearance before ordering. Wheel Cons...
View Wheels & Tires Products