Click to zoom in
Ditch the Factory Netting for Rigid Steel Molle Pockets Built for Real Gear
The DV8 Offroad MPJK-07 Slim Front Door Molle Pockets are the direct factory netting replacement your 2011-2018 Jeep Wrangler JK has been waiting for. Built from 2mm steel with a snap-in locking tab design, these MPJK-07 pockets install in minutes without tools and give you a full molle panel to mount knife sheaths, multi-tools, holsters, trauma kits, and more. The slim profile delivers more legroom than the standard MPJK-05 design, so you gain storage without giving up comfort. A micro-texture black powder coat ties the pockets seamlessly into your JK interior.
Key Features
- Full molle panel layout for modular gear mounting on every drive
- 2mm steel construction versus weak factory netting
- Slim design delivers more legroom than standard MPJK-05 door pockets
- Snap-in design with locking tabs for secure, rattle-free fitment
- Micro-texture black powder coat finish for a factory-matched interior look
- Sold as a pair covering both front doors
- Cutting and removal of factory netting required for installation
- Compatible with 2011-2018 Jeep Wrangler JK 2-Door and 4-Door models
Vehicle Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2011-2018 | Jeep | Wrangler | Sport |
| 2011-2018 | Jeep | Wrangler | Sahara |
| 2011-2018 | Jeep | Wrangler | Rubicon |
| 2012-2018 | Jeep | Wrangler | Freedom Edition |
| 2014-2018 | Jeep | Wrangler | Altitude |
Specifications
| Detail | Value |
|---|---|
| Part Number | MPJK-07 |
| SKU | DVEMPJK-07 |
| Brand | DV8 Offroad |
| Material | 2mm Steel |
| Finish | Micro-Texture Black Powder Coat |
| Installation Method | Snap-In with Locking Tabs |
| Quantity | Sold as Pair (2 pockets) |
| Compatible Model | 2011-2018 Jeep Wrangler JK |
| Product Type | Front Door Molle Pocket Replacement |
What's Included
- 2x DV8 Offroad MPJK-07 Slim Front Door Molle Pocket panels
- Hardware and locking tabs for snap-in installation
- Installation instructions
Frequently Asked Questions
What years and models does the MPJK-07 fit?The MPJK-07 fits all 2011-2018 Jeep Wrangler JK models including Sport, Sahara, and Rubicon in both 2-Door and 4-Door configurations.
What is the difference between the MPJK-07 and the MPJK-05?The MPJK-07 is the slim version with a narrower profile for increased legroom, while the MPJK-05 is the standard-width front door molle pocket. Both replace the factory netting with steel panels.
Do I have to cut the factory netting to install the MPJK-07?Yes. Cutting and full removal of the factory door netting is required before the MPJK-07 panels can snap into place. A utility knife or scissors handles this quickly.
Does the MPJK-07 require any drilling or permanent modification?No drilling or permanent modification is needed. The pockets use a snap-in design with locking tabs that secure to the factory door pocket opening without drilling.
Are these sold as a pair or individually?The MPJK-07 is sold as a set of two, covering both the driver and passenger front doors.
What molle accessories can I mount on the MPJK-07 panels?The full molle grid accepts any standard PALS-compatible gear including knife sheaths, multi-tools, holsters, medical pouches, water bottle holders, radio clips, and flashlight mounts.
Will the MPJK-07 fit the Jeep Wrangler JL or Gladiator JT?No. The MPJK-07 is designed exclusively for the 2011-2018 Jeep Wrangler JK. For JL Wranglers and JT Gladiators, DV8 Offroad offers a separate slim pocket model.
Does the MPJK-07 work on the rear doors of a 4-Door JK?No. The MPJK-07 replaces the front door pockets only. Rear door molle replacements are a separate fitment.
How does the powder coat hold up to daily use?The micro-texture black powder coat is a durable, chip-resistant finish designed for interior use. It resists scuffs and abrasion from gear mounting and matches the factory black plastic interior trim.
What is the return policy for this product?This product is covered by our standard return policy. Contact us within 30 days of delivery for a return or exchange on unused, uninstalled items in original packaging.
Installation Instructions
- Open the front door and locate the factory door pocket netting on the inside panel.
- Using a utility knife or scissors, carefully cut and fully remove the factory netting from the door pocket opening.
- Align the MPJK-07 molle pocket panel with the door pocket opening.
- Press the panel firmly into position, engaging the locking tabs around the pocket perimeter.
- Confirm all locking tabs are seated and the panel is rattle-free.
- Repeat on the opposite front door.
- Mount desired molle accessories to the panel grid.
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
DV8 Offroad
DV8 Offroad parts for Jeep, Ford Bronco, Toyota, and off road trucks are stocked at Black Ops Auto Works. Shop front and rear bumpers, skid plates, rock sliders, roof racks, MOLLE panels, tire carriers, winches, and light mounts for Jeep Wrangler, Jeep Gladiator, Ford Bronco, Toyota Tacoma, Toyota 4Runner, Toyota Tundra, and RAM applications. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 281 DV8 Offroad SKUs across bumpers, armor, storage, and recovery categories. What This Brand Covers DV8 Offroad builds trail armor and accessories aimed primarily at the Jeep Wrangler and Gladiator platforms, along with growing support for the Ford Bronco and Toyota Tacoma, 4Runner, and Land Cruiser. The lineup covers bumpers, skid plates, rock sliders, storage panels, roof racks, and recovery equipment built for aggressive off road styling and trail durability. Platforms Covered Jeep Wrangle...
View DV8 Offroad Products
Exterior Parts & Accessories
Exterior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop bumpers, grilles, fender flares, running boards, nerf bars, tonneau covers, mud flaps, front lips, splitters, spoilers, diffusers, body kits, carbon fiber panels, roof racks, bed accessories, tow hooks, and car covers for daily drivers, work trucks, and performance builds. Every product is filterable by category, brand, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 9,697 exterior parts SKUs across style, protection, and utility categories. What This Category Covers Exterior parts change how a vehicle looks, protects itself, and hauls gear. Fitment depends on body style, cab and bed configuration, and factory sensor or camera equipment, so confirm compatibility before ordering. Appearance Upgrades Grilles, front lips, splitters, spoilers, diffusers, and body kits update the front end and aero character of a ...
View Exterior Parts & Accessories Products
Exterior Styling
Exterior styling parts and accessories for cars, trucks, and SUVs are stocked at Black Ops Auto Works. Shop spoilers, front splitters, rear diffusers, side skirts, body kits, carbon fiber hoods and trunks, fender flares, badges and emblems, mirror covers, chrome delete trim, and window vents for Jeep Grand Cherokee Trackhawk, Dodge Charger and Challenger, RAM TRX, Chevrolet Camaro and Corvette, and Hellcat and SRT platforms. Every product is filterable by year, make, model, trim, and body style so the correct part ships the first time. Black Ops Auto Works carries 2,389 exterior styling SKUs across aerodynamic, carbon fiber, and badge and trim categories. What This Collection Covers Exterior Styling groups together the parts that change the visual character and aerodynamics of a vehicle, from functional front splitters and rear diffusers to purely cosmetic badges and mirror covers. This collection combines Black Ops Auto Works in-house carbon fiber and fiberglass components with...
View Exterior Styling Products
Exterior Trim
Exterior trim parts and accessories for Jeep Grand Cherokee Trackhawk, RAM 1500 TRX and RHO, Dodge Charger and Challenger Hellcat and SRT, and Dodge Durango platforms are stocked at Black Ops Auto Works. Shop badges, emblems, mirror covers, grille overlays, carbon fiber accent trim, headlight covers, rear steps, trunk latch covers, and tailgate hardware for Mopar and Trackhawk builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 478 exterior trim SKUs across badge, mirror, grille, and carbon fiber accent categories. What This Category Covers Exterior trim upgrades cover the badges, emblems, mirror covers, grille overlays, carbon fiber accents, and tailgate hardware that finish the visual details on a performance truck or muscle car build once the mechanical foundation is already sorted. Factory chrome badges, plastic mirror covers, and generic emblems are the most commonly re...
View Exterior Trim Products