View vehicle applications
Fitment notes and restrictions
Description
Keep heavy Ford and Lincoln front brakes cooler under repeated stops
EBC Brakes GD7842 is a matched pair of front GD Sport rotors for the supported six-lug Ford and Lincoln brake systems. The 350 x 34 mm vented design uses wide curved slots and blind dimples to clear debris and moisture while preserving rotor strength for street, towing, and performance use.
Key Features
- EBC Brakes GD7842 is matched to the verified application and configuration
- Matched two-rotor axle set
- 350 mm diameter x 34 mm thick one-piece vented rotor configuration
- Wide curved slots help clear water, gases, dust, and debris from the pad contact area
- Blind dimples support pad degassing without through-drilled stress points
- Silver-gray Geomet-style corrosion-resistant finish
- Direct-replacement dimensions for the supported factory brake configuration
Application details and restrictions
| Years | Make | Models | Brake Requirement |
|---|---|---|---|
| 2022-2024, 2026 | Ford | Bronco Raptor | Front 350 x 34 mm vented rotor; FMSI D2382 pad configuration |
| 2022-2024, 2026 | Ford | Expedition | Supported trims with front 350 x 34 mm vented six-lug rotor |
| 2021-2024, 2026 | Ford | F-150 | Supported trims with front 350 x 34 mm vented six-lug rotor |
| 2022-2024 | Lincoln | Navigator | Supported trims with front 350 x 34 mm vented six-lug rotor |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | GD7842 |
| Series | GD Sport / 3GD |
| Position | Front |
| Rotor Construction | One-piece vented |
| Rotor Surface | Wide-slot and blind-dimple pattern |
| Rotor Dimensions | 350 mm diameter x 34 mm thick |
| Quantity | Two rotors |
| Finish | Silver-gray corrosion-resistant coating |
| UPC | 889668264937 |
What's Included
- One exact EBC Brakes GD7842 front axle pair of GD Sport rotors
- Only documentation supplied in the sealed EBC package
- Brake pads, calipers, sensors, fluid, tools, and unrelated hardware are not included
About EBC Brakes
EBC Brakes develops application-specific friction and rotor systems for street, towing, and performance use. Axle position, rotor dimensions, caliper and pad configuration, hub condition, installed runout, and bedding must be verified during every brake service.
Related Parts
- Select EBC pads, opposite-axle rotors, wear sensors, and brake fluid only by their own exact application and manufacturer part number; no unverified internal link is included.
FAQ
What is the GD7842?It is front dimpled and slotted brake rotor pair for the listed Ford and Lincoln factory brake configurations.
What application must be confirmed before ordering?Confirm model year, trim, engine where listed, front axle, six-lug hub, and the 350 mm diameter x 34 mm thick factory rotor configuration before ordering.
What is included?The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.
Is this a universal product?No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.
Does the listing include unrelated installation parts?No. Only the exact component or kit identified in the included-items section is supplied.
Should existing components be inspected?Inspect hub runout, wheel bearings, calipers, pads, hoses, fluid, sensors, and all mounting hardware during rotor service.
Is professional installation recommended?Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.
What should be checked after installation?Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.
Installation Instructions
- Confirm EBC Brakes GD7842, the application, and every listed restriction before installation.
- Measure the existing rotor and inspect pads, calipers, hoses, fluid, bearings, and sensors.
- Remove the original rotors, clean the hub faces thoroughly, and measure hub runout.
- Install the matched rotors in their correct orientation and verify assembled runout before fitting pads.
- Torque caliper and wheel fasteners to the current vehicle specification and restore a firm pedal.
- Complete EBC's current bedding procedure, avoid holding hot pads against the rotor, and recheck brake operation.
California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.




