View vehicle applications
Fitment notes and restrictions
Description
Upgrade the front axle with matched high-friction pads and cooled rotors
EBC Brakes S5KF2088 combines Yellowstuff pad set DP43141R with GD Sport rotor pair GD7842 for the supported Ford and Lincoln brake configurations. The matched components retain the verified 350 mm diameter x 34 mm thick rotor dimensions while adding high-friction pads, wide slots, blind dimples, and corrosion-resistant rotor coating.
Key Features
- EBC Brakes S5KF2088 is matched to the verified application and configuration
- Exact kit components: DP43141R Yellowstuff pads and GD7842 GD Sport rotors
- GG-rated aramid-fiber Yellowstuff pad formulation
- Fully shimmed, chamfered, and slotted pad design with Brake-In surface coating
- Matched 350 mm diameter x 34 mm thick one-piece vented rotor pair
- Wide slots and blind dimples help manage heat, water, gases, dust, and debris
- Direct-fit configuration with no brake-system modification claimed for the supported applications
Application details and restrictions
| Years | Make | Models | Brake Requirement |
|---|---|---|---|
| 2022-2024, 2026 | Ford | Bronco Raptor | Front 350 x 34 mm vented rotor; FMSI D2382 pad configuration |
| 2022-2024, 2026 | Ford | Expedition | Supported trims with front 350 x 34 mm vented six-lug rotor |
| 2021-2024, 2026 | Ford | F-150 | Supported trims with front 350 x 34 mm vented six-lug rotor |
| 2022-2024 | Lincoln | Navigator | Supported trims with front 350 x 34 mm vented six-lug rotor |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | S5KF2088 |
| Series | Stage 5 Yellowstuff with GD Sport rotors |
| Position | Front |
| Pad Part Number | DP43141R |
| Rotor Part Number | GD7842 |
| Rotor Dimensions | 350 mm diameter x 34 mm thick |
| Rotor Construction | One-piece vented |
| Rotor Surface | Wide-slot and blind-dimple pattern |
| Pad Material | Aramid fiber |
| UPC | 889668265422 |
What's Included
- One exact EBC Brakes S5KF2088 front axle set of Yellowstuff brake pads
- pair of GD7842 GD Sport rotors
- EBC caliper lubricant when supplied in the sealed manufacturer kit
- Calipers, hoses, sensors, brake fluid, tools, and unrelated hardware are not included
About EBC Brakes
EBC Brakes develops matched pad-and-rotor packages around application-specific dimensions and friction requirements. Correct axle position, rotor dimensions, caliper configuration, hub runout, hardware condition, installation procedure, and bedding must be confirmed for every kit.
Related Parts
- Select opposite-axle brake parts, wear sensors, hardware, and fluid only by their own exact application and manufacturer part numbers; no unverified internal link is included.
FAQ
What is the S5KF2088?It is front brake pad and rotor kit for the listed Ford and Lincoln factory brake configurations.
What application must be confirmed before ordering?Confirm model year, trim, engine where listed, front axle, six-lug hub, and the 350 mm diameter x 34 mm thick factory rotor and caliper configuration before ordering.
What is included?The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.
Is this a universal product?No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.
Does the listing include unrelated installation parts?No. Only the exact component or kit identified in the included-items section is supplied.
Should existing components be inspected?Inspect hub runout, rotor dimensions, calipers, hoses, fluid, sensors, wheel bearings, and all mounting hardware before installation.
Is professional installation recommended?Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.
What should be checked after installation?Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.
Installation Instructions
- Confirm EBC Brakes S5KF2088, the application, and every listed restriction before installation.
- Inspect the complete brake system and measure the existing rotor before removing any components.
- Clean the hub faces, measure hub runout, and install the matched GD rotors in their correct orientation.
- Fit the Yellowstuff pads with only the verified shims, clips, lubricant, and hardware for the application.
- Torque caliper and wheel fasteners to the current vehicle specification and restore a firm pedal.
- Complete EBC's current bedding procedure, verify safe braking, and recheck the system after the initial heat cycles.




