-18%
EBC S5KR1797 rear Yellowstuff pad and six-lug GD rotor kit
Click to zoom in
View vehicle applications

Description

Upgrade the rear axle with matched high-friction pads and cooled rotors

EBC Brakes S5KR1797 combines Yellowstuff pad set DP43142R with GD Sport rotor pair GD7843 for the supported Ford and Lincoln brake configurations. The matched components retain the verified 336 mm diameter x 20 mm thick rotor dimensions while adding high-friction pads, wide slots, blind dimples, and corrosion-resistant rotor coating.

Key Features

  • EBC Brakes S5KR1797 is matched to the verified application and configuration
  • Exact kit components: DP43142R Yellowstuff pads and GD7843 GD Sport rotors
  • GG-rated aramid-fiber Yellowstuff pad formulation
  • Fully shimmed, chamfered, and slotted pad design with Brake-In surface coating
  • Matched 336 mm diameter x 20 mm thick one-piece vented rotor pair
  • Wide slots and blind dimples help manage heat, water, gases, dust, and debris
  • Direct-fit configuration with no brake-system modification claimed for the supported applications

Application details and restrictions

Years Make Models Brake Requirement
2026 Ford Bronco Raptor Rear 336 x 20 mm vented rotor; FMSI D2383 pad configuration
2022-2024, 2026 Ford Expedition Supported trims with rear 336 x 20 mm vented six-lug rotor
2021-2024, 2026 Ford F-150 Supported trims with rear 336 x 20 mm vented six-lug rotor
2022-2024 Lincoln Navigator Supported trims with rear 336 x 20 mm vented six-lug rotor

Specifications

Detail Value
Manufacturer Part Number S5KR1797
Series Stage 5 Yellowstuff with GD Sport rotors
Position Rear
Pad Part Number DP43142R
Rotor Part Number GD7843
Rotor Dimensions 336 mm diameter x 20 mm thick
Rotor Construction One-piece vented
Rotor Surface Wide-slot and blind-dimple pattern
Pad Material Aramid fiber
UPC 889668265439

What's Included

  • One exact EBC Brakes S5KR1797 rear axle set of Yellowstuff brake pads
  • pair of GD7843 GD Sport rotors
  • EBC caliper lubricant when supplied in the sealed manufacturer kit
  • Calipers, hoses, sensors, brake fluid, tools, and unrelated hardware are not included

About EBC Brakes

EBC Brakes develops matched pad-and-rotor packages around application-specific dimensions and friction requirements. Correct axle position, rotor dimensions, caliper configuration, hub runout, hardware condition, installation procedure, and bedding must be confirmed for every kit.

Related Parts

  • Select opposite-axle brake parts, wear sensors, hardware, and fluid only by their own exact application and manufacturer part numbers; no unverified internal link is included.

FAQ

What is the S5KR1797?

It is rear brake pad and rotor kit for the listed Ford and Lincoln factory brake configurations.

What application must be confirmed before ordering?

Confirm model year, trim, engine where listed, rear axle, six-lug hub, and the 336 mm diameter x 20 mm thick factory rotor and caliper configuration before ordering.

What is included?

The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.

Is this a universal product?

No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.

Does the listing include unrelated installation parts?

No. Only the exact component or kit identified in the included-items section is supplied.

Should existing components be inspected?

Inspect hub runout, rotor dimensions, calipers, hoses, fluid, sensors, wheel bearings, and all mounting hardware before installation.

Is professional installation recommended?

Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.

What should be checked after installation?

Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.

Installation Instructions

  1. Confirm EBC Brakes S5KR1797, the application, and every listed restriction before installation.
  2. Inspect the complete brake system and measure the existing rotor before removing any components.
  3. Clean the hub faces, measure hub runout, and install the matched GD rotors in their correct orientation.
  4. Fit the Yellowstuff pads with only the verified shims, clips, lubricant, and hardware for the application.
  5. Torque caliper and wheel fasteners to the current vehicle specification and restore a firm pedal.
  6. Complete EBC's current bedding procedure, verify safe braking, and recheck the system after the initial heat cycles.

EBC Yellowstuff GD Rear Brake Kit for Ford and Lincoln Trucks

EBC
EBCS5KR1797
Brake Rotors - Slot & Drilled
1 Units In Stock
$ 461.93 $ 374.50
$ 374.50

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×