View vehicle applications
Fitment notes and restrictions
Description
Connect a 3/8-inch hose to the rear carburetor port with one compact brass fitting
Edelbrock 8080 is a straight brass hose fitting with a 1/4-18 NPT male thread and a 3/8-inch single barb. Edelbrock specifies it for the rear port of its four-barrel carburetors, making connection size and carburetor port compatibility the deciding factors rather than vehicle year, make, or model.
Key Features
- Solid brass construction
- 1/4-18 NPT male threaded end
- 3/8-inch single hose barb
- Straight fitting configuration
- Designed for the rear port of Edelbrock four-barrel carburetors
- Sold individually
Fitment & Requirements
| Fitment Basis | Required Match |
|---|---|
| Carburetor and connection size | Edelbrock four-barrel carburetor rear port with 1/4-18 NPT thread and compatible 3/8-inch hose |
No year-make-model fitment applies. Confirm the carburetor model, rear-port thread, hose inside diameter, hose material, routing, and the requirements of the connected vacuum or fluid system before installation. This fitting does not convert a different thread size or hose diameter.
Part Numbers & Options
| Detail | Value |
|---|---|
| Manufacturer Part Number | 8080 |
| Product Type | Carburetor hose fitting |
| Threaded End | 1/4-18 NPT male |
| Hose End | 3/8-inch single barb |
| Angle | Straight |
| Material | Brass |
| Quantity | One |
| Application | Rear port of compatible Edelbrock four-barrel carburetors |
What's Included
- One brass carburetor hose fitting
About Edelbrock
Edelbrock develops intake manifolds, carburetors, cylinder heads, fuel-system components, and supporting hardware for street and performance applications. Small connection parts must be selected by exact thread, hose, and component interface to avoid leaks or damaged threads.
Related Parts
- No related product is linked because hose type and carburetor configuration must be confirmed for the complete system.
FAQ
What is the 8080?It is Edelbrock's straight brass fitting with a 1/4-18 NPT male thread and a 3/8-inch hose barb.
Does this fit a specific vehicle?No. Compatibility is based on the carburetor rear port, thread size, hose diameter, hose type, and system requirements.
Which carburetors are supported?Edelbrock specifies the fitting for the rear port of its four-barrel carburetors.
What thread size is used?The threaded end is 1/4-18 NPT male.
What hose size fits the barb?The barb is sized for compatible 3/8-inch hose.
What is the fitting made from?The manufacturer specifies brass construction.
How many fittings are included?One fitting is included.
Are hose, clamps, or sealant included?No. The listing includes the fitting only. Select any supporting parts according to the carburetor, hose, and system instructions.
Installation Instructions
- Confirm the carburetor rear port is 1/4-18 NPT and the hose connection requires a 3/8-inch barb.
- Shut down the vehicle, allow components to cool, and relieve pressure or vacuum according to the complete system instructions.
- Inspect and clean the carburetor port without allowing debris to enter the passage.
- Install the fitting using the carburetor manufacturer's current sealing and tightening instructions, keeping the brass threads correctly aligned.
- Route and secure a compatible 3/8-inch hose according to its manufacturer requirements and keep it away from heat, abrasion, and moving components.
- Restore operation and inspect the connection for leakage, interference, and secure hose retention before driving.
California Proposition 65 Warning: Cancer and reproductive harm - www.P65Warnings.ca.gov.




