-9%
Eibach Endlink Spacers - Bolt Diameter M10 / Width 5MM (Pack of 4)-Eibach-EIBELS-10-05
Click to zoom in

Eibach Endlink Spacers - Bolt Diameter M10 / Width 5MM (Pack of 4)

Eibach
EIBELS-10-05
803050492302
Sway Bar Endlinks
20+ Units In Stock
$ 13.33 $ 12.00
$ 12.00

Eibach part EIBELS-10-05 is a component in the sway bar endlinks category that requires exact application verification. Confirm the complete vehicle or engine, dimensions, interface, intended use, required supporting parts, and every manufacturer application note before ordering.

Key Features

  • Exact Eibach manufacturer part number EIBELS-10-05
  • Product type: Sway Bar Endlinks
  • Spring rate, free length, inside diameter, axle position, and suspension configuration are exact-part-number specific
  • Ride height, load, damper travel, alignment, wheel clearance, and required companion components must be confirmed

Fitment

Fitment Status Fitment Verification Required
Required Verification Exact manufacturer part number and complete vehicle, engine, dimensional, and installation requirements

Specifications

Manufacturer Eibach
Manufacturer Part Number EIBELS-10-05
Product Type Sway Bar Endlinks
Fitment Type Fitment verification required
Configuration Exact finish, size, quantity, and application shown in this listing

What's Included

One new Eibach sway bar endlinks in the exact configuration identified by part number EIBELS-10-05. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.

About Eibach

Eibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.

Related Eibach Products

Browse the Eibach collection for related components.

Frequently Asked Questions

How do I confirm Eibach EIBELS-10-05 fits my vehicle or coilover?
Match the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.

Will the listed ride-height change be identical on every vehicle?
No. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.

What should be checked after suspension installation?
Verify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.

Installation Instructions

Review the current instructions for exact part number EIBELS-10-05, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.

Request For Information

Have questions about Eibach Endlink Spacers - Bolt Diameter M10 / Width 5MM (Pack of 4)? Fill out the form below and we'll get back to you by the next business day.
Eibach

Eibach

Shop Eibach lowering springs, truck lift kits, coilovers, shocks, sway bars, and suspension accessories at Black Ops Auto Works. Explore suspension options for compatible performance cars, trucks, SUVs, and specialty builds. From lowering a street-driven vehicle to configuring a lifted truck or selecting replacement coilover springs, match the components to your chassis, suspension package, and intended use. Eibach PRO-KIT Lowering Springs Eibach PRO-KIT springs provide application-specific lowering options for supported vehicles. This collection includes standard and selected Special Edition packages, with applications ranging from Jeep Grand Cherokee and Dodge performance models to BMW, Porsche, and other platforms. Compare the listed front and rear ride-height changes, supported trims, and factory suspension requirements. A kit for a standard model may not fit its SRT, Trackhawk, AWD, or electronically controlled suspension counterpart. Verify whether the package contains a compl...

View Eibach Products
Suspension

Suspension

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...

View Suspension Products
Sway Bar Endlinks

Sway Bar Endlinks

Sway bar end links and adjustable stabilizer links for Jeep, RAM, Dodge, Toyota, Lexus, Subaru, Ford, Chevrolet, and import performance platforms are stocked at Black Ops Auto Works. Shop rubber bushed OE style links, polyurethane bushed links, heim jointed rod end links, spherical race links, extended links for lifted trucks, dropped links for lowered cars, and KDSS specific links for Trackhawk, Wrangler, Tacoma, 4Runner, Land Cruiser, WRX, STI, and muscle car builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 365 sway bar end link SKUs across joint type, adjustability, length, and vehicle platform. What This Category Covers Sway bar end links connect the ends of a sway bar to the control arm or strut so the bar can twist and resist body roll during cornering. This collection covers every end link style enthusiasts and shops need, from factory replacement rubber bushed lin...

View Sway Bar Endlinks Products
Sway Bars & Bushings

Sway Bars & Bushings

Sway bars, bushings, brackets, and end links are stocked at Black Ops Auto Works for improved handling, reduced body roll, and sharper steering response. Shop front and rear sway bars, anti-roll kits, adjustable and billet end links, sway bar bushings, and service kits for Jeep, Dodge, Ram, Ford, Chevrolet, GMC, BMW, Porsche, Subaru, and Toyota platforms. Every product is filterable by year, make, model, trim, and drivetrain so the correct sway bar component ships the first time. Black Ops Auto Works carries 1,966 sway bar and bushing SKUs across street, off-road, and track categories. What This Collection Covers A sway bar, also called an anti-roll bar, connects the left and right sides of the suspension to reduce body roll during cornering. Bushings support the bar in its mounts, and end links connect the bar to the suspension for precise, controlled movement. Product Categories Front sway bars, rear sway bars, anti-roll kits, adjustable sway bars, sway bar bushings and mount ...

View Sway Bars & Bushings Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×