View vehicle applications
Fitment notes and restrictions
Description
Add a lightweight paired-spoke wheel without guessing the critical dimensions
Enkei 522-880-6545BK is the gloss black TS-V in an 18x8 size with a 5x114.3 bolt pattern, +45 mm offset, and 72.6 mm center bore. Its ten paired spokes distribute track loads across the wheel, while Enkei's MAT rim-forming process supports a low estimated weight without replacing the need for a complete vehicle clearance check.
Key Features
- Ten paired spokes distribute loads and stresses around the wheel
- Enkei MAT construction combines one-piece casting with rim-forming technology
- Spec-E inspected to Enkei's testing standard
- Gloss black finish on the verified front-face configuration
- Front-depth face profile for this exact size and offset
- TPMS-compatible design
- Sold individually; four wheels are required for a complete square set
Application details and restrictions
| Application Type | Verified Requirements and Restrictions |
|---|---|
| Universal dimension-based wheel | Requires a 5x114.3 bolt pattern, 72.6 mm hub-bore compatibility, +45 mm offset, 6.27 in backspacing, compatible 60-degree conical small-diameter lug hardware, and verified brake, suspension, tire, fender, load, and TPMS clearance. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 522-880-6545BK |
| Series | TS-V Tuning Series |
| Size | 18 x 8 in |
| Bolt Pattern | 5 x 114.3 mm / 5 x 4.5 in |
| Offset | +45 mm |
| Backspacing | 6.27 in |
| Center Bore | 72.6 mm |
| Estimated Weight | 18.85 lb |
| Face Profile | Front depth |
| Construction | One-piece aluminum with MAT rim-forming technology |
| Finish | Gloss black |
| Lug Seat | 60-degree conical seat |
| TPMS Compatible | Yes |
| Quantity | One wheel |
What's Included
- TS-V 18x8 gloss black wheel
- One matching Enkei center cap
- Lug nuts, valve stem, TPMS sensor, hub-centric rings, tire, and mounting or balancing service are not included
About Enkei
Enkei engineers performance wheels using application-specific dimensions and its MAT rim-forming process. TS-V wheels are Spec-E inspected, but safe installation still depends on matching the hub, fasteners, brakes, tire, suspension, body clearance, and vehicle load requirements.
Related Parts
- Select tires, small-diameter conical lug hardware, valve stems, TPMS sensors, and hub-centric rings only after confirming every wheel and vehicle dimension; no unverified internal product link is included.
FAQ
What is the 522-880-6545BK?It is 18x8 flow-formed aluminum wheel for vehicles whose complete wheel requirements match the verified dimensions and clearances.
What application must be confirmed before ordering?Confirm bolt pattern, center bore, offset, backspacing, brake and suspension clearance, tire size, load requirements, lug-seat style, hub-ring need, and TPMS compatibility before ordering.
What is included?The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.
Is this a universal product?No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.
Does the listing include unrelated installation parts?No. Only the exact component or kit identified in the included-items section is supplied.
Should existing components be inspected?Yes. Inspect the hubs, wheel studs or bolts, lug seats, brakes, tires, valve stems, TPMS components, suspension, and fender clearance before installation.
Is professional installation recommended?Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.
What should be checked after installation?Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.
Installation Instructions
- Confirm every published wheel dimension against the vehicle, brake package, suspension, intended tire, and required load capacity.
- Test-fit the wheel without a tire and verify hub engagement plus caliper, suspension, steering, and body clearance through the usable range of motion.
- Install the correct valve stem or TPMS sensor and have a qualified wheel and tire technician mount and dynamically balance the approved tire.
- Use compatible small-diameter 60-degree conical lug hardware and any correctly sized hub-centric ring required by the vehicle hub.
- Tighten the wheel hardware in the vehicle-specified cross pattern and torque sequence without using an impact wrench for final torque.
- Verify tire pressure, TPMS operation, and all clearances, then recheck lug torque after the initial driving interval specified by the vehicle and wheel instructions.




