-15%
Click to zoom in
Restore factory-style clutch engagement in the early SJ410
EXEDY KSZ02 is an OE replacement clutch kit for the verified 1982 Suzuki SJ410 with the 993 cc 1.0L three-cylinder engine. Its 180 mm disc uses an 18-spline, 3/4-inch hub and must be matched to the original flywheel and transmission input shaft.
Key Features
- OE-style replacement pressure plate and driven disc
- 180 mm or 7-1/8 inch disc diameter
- 18-spline hub
- 3/4 inch spline diameter
- Application-specific release components
- Matched kit components for factory-style service
Fitment
| Year | Verified Application |
|---|---|
| 1982 | KSZ02 fits Suzuki SJ410 with 993 cc 1.0L inline-three and the verified 180 mm, 18-spline clutch configuration. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | KSZ02 |
| Application | 1982 Suzuki SJ410 1.0L |
| Disc Diameter | 180 mm / 7-1/8 in |
| Spline Count | 18 |
| Spline Diameter | 3/4 in |
| UPC | 651099110394 |
| Condition | New |
What's Included
- One KSZ02 clutch disc and pressure plate set
- Release bearing, pilot component, and alignment tool only as supplied in the sealed EXEDY kit
- Flywheel, hydraulic components, fork, and fasteners are not included
About EXEDY
EXEDY supplies original-equipment and replacement clutch components engineered around defined disc, hub, pressure-plate, and release-system specifications. Correct engine and transmission identification is essential before service.
Related Parts
- No internal flywheel or hydraulic link is included because those parts require exact transmission and market-specific verification.
FAQ
What is the KSZ02?It is the exact OE replacement clutch kit for the 1982 Suzuki SJ410 1.0L described in the fitment and specification tables above.
Is this sold as a complete vehicle set?No. The included quantity is stated explicitly in the What's Included section.
Does installation require professional service?Professional installation is recommended whenever specialized tools, lifting, alignment, or drivetrain service is required.
Should fitment be checked before ordering?Yes. Confirm every listed year, model, engine, dimension, position, and exclusion that applies to the vehicle.
Are unrelated mounting parts included?No. Only the components listed in the sealed manufacturer package are included.
Does the factory warranty apply?Warranty coverage follows the current manufacturer's terms and requires proper installation and use.
Can a related part number be substituted?No. A different part number may change dimensions, contents, finish, or vehicle application.
What should be checked after installation?Inspect clearances, fasteners, operation, and any manufacturer-required service checks before normal use.
Installation Instructions
- Confirm the 1982 SJ410, 1.0L engine, 180 mm disc, 18 splines, and 3/4 inch input-shaft spline.
- Follow the Suzuki service procedure, disconnect the battery, support the vehicle, and support the transmission before removal.
- Inspect the flywheel, fork, guide tube, seals, hydraulics or cable, and transmission input shaft; repair defects before installing the kit.
- Clean friction surfaces with approved brake cleaner and never contaminate the disc lining.
- Center the KSZ02 disc with the supplied or correct alignment tool and tighten the pressure plate evenly to factory specification.
- Reinstall the transmission without hanging its weight on the disc, adjust the release system, verify engagement, and follow EXEDY break-in guidance.
Found it for less?
20 years of performance expertise. Put our pricing to the test. Email the competitor’s link and attach screenshots or files.
Military & First Responders
A program for military members and first responders, with dedicated verification and support for your next build.