Click to zoom in
Custom Trex V3 Badges for Smooth, Flat Surfaces
Add a matched pair of layered Trex head badges with customizable materials, colors, and finishes to a smooth, flat exterior surface.
Key Features
- Layered 1/8 inch UV and impact resistant acrylic construction
- Vacuum infused carbon fiber material option
- Preapplied 3M tape for peel and stick mounting
- Paint matched colors, specialty finishes, and clear coat options
- Outdoor rated construction for year round vehicle use
- Made in the United States
Fitment
| Application | Surface Requirement | Mounting Method | Installation Check |
|---|---|---|---|
| Universal | Smooth, flat, clean surface | Preapplied 3M tape | The complete badge must sit flush before installation |
Specifications
| Detail | Value |
|---|---|
| Product Type | Badge and emblem pair |
| Dimensions | 3.8 inches wide by 4 inches high |
| Construction | Layered 1/8 inch acrylic or vacuum infused carbon fiber |
| Mounting | Preapplied 3M tape |
| Application | Universal smooth, flat surface |
| Country of Origin | United States |
What's Included
- One Trex V3 head pair
- Preapplied 3M tape
- One 3M adhesion promoter application towelette, when applicable
About Exotic Innovations
Exotic Innovations creates customizable automotive badges and exterior accents in the United States, including licensed designs with layered acrylic and carbon fiber options.
FAQ
What is the Exotic Innovations Trex V3 Head Pair?It is a matched pair of layered Trex head badges designed for adhesive mounting on a smooth, flat surface.
What materials are available?Choose layered 1/8 inch UV and impact resistant acrylic or a vacuum infused carbon fiber option.
What are the published dimensions?The published dimensions are 3.8 inches wide by 4 inches high.
Where can I install the badges?Install them on a smooth, flat surface where the complete badge can sit flush.
How do the badges attach?Preapplied 3M tape provides peel and stick mounting after the surface is prepared correctly.
How should I prepare the surface?Remove dirt, grease, wax, and coatings, then clean the area with rubbing alcohol and allow it to dry.
What installation temperature is required?Install above 70 degrees Fahrenheit, press firmly for 60 seconds, and keep the area away from water for 24 hours.
Can the badges be used outdoors?Yes. The construction is UV resistant, weather resistant, and intended for year round exterior use.
Installation Instructions
- Choose a smooth, flat location and dry fit both badges to confirm that each one sits flush.
- Complete the installation when the surface and air temperature are above 70 degrees Fahrenheit.
- Remove dirt, grease, wax, and coatings from the mounting area.
- Clean the surface with rubbing alcohol and allow it to dry fully.
- Apply the adhesion promoter when a promoter towelette is supplied.
- Peel the tape backing, align the badge, and avoid touching the adhesive.
- Press the complete badge firmly against the surface for 60 seconds.
- Keep the installed badges away from water for 24 hours.
Exotic Innovations
Shop Exotic Innovations badges, emblems, carbon-fiber trim, door sill plates, and custom vehicle accents for select Ram, Jeep, Dodge, Chrysler, Ford Bronco, and Kia applications. Choose OEM paint-code-matched colors, layered acrylic, or genuine carbon fiber where offered, then verify the exact year, make, model, trim, mounting location, and package quantity on the product page. OEM paint-code color matching on eligible custom badges and trim Layered acrylic and vacuum-infused carbon-fiber options on select products UV-resistant automotive clear coat and 3M mounting where specified Many Exotic Innovations parts are made to order. Production timing varies by design, material, color, and customization, so use the availability shown on the individual product page before ordering. Exotic Innovations Ram TRX, RHO, and Ram 1500 Accessories Build a coordinated Ram exterior or cabin with grille badges, tailgate emblems, fender badges, hood emblems, console badges, door sill plates, and ...
View Exotic Innovations Products
Exterior Parts & Accessories
Shop exterior parts and accessories for cars, trucks, Jeeps, and SUVs at Black Ops Auto Works. Explore carbon-fiber hoods, front lips, splitters, spoilers, diffusers, fender flares, truck steps, bed accessories, and exterior trim. Whether you are updating a performance vehicle’s appearance or adding everyday utility to a pickup, choose components matched to your exact vehicle and existing equipment. Carbon-Fiber Hoods and Body Panels Explore Black Ops Auto Works hood designs and selected replacement panels for Jeep Grand Cherokee, Dodge Charger, Dodge Durango, Chrysler 300, and other listed applications. Featured designs include Demon, Sniper, Redeye, and CFR options for supported vehicle configurations. Compare the construction, finish, mounting requirements, and supplied components on each listing. A carbon-fiber appearance does not establish that every product uses the same material or manufacturing method. Browse our Black Ops Carbon Fiber collection for focused shopping. Front ...
View Exterior Parts & Accessories Products
Exterior Styling
Exterior styling parts and accessories for cars, trucks, and SUVs are stocked at Black Ops Auto Works. Shop spoilers, front splitters, rear diffusers, side skirts, body kits, carbon fiber hoods and trunks, fender flares, badges and emblems, mirror covers, chrome delete trim, and window vents for Jeep Grand Cherokee Trackhawk, Dodge Charger and Challenger, RAM TRX, Chevrolet Camaro and Corvette, and Hellcat and SRT platforms. Every product is filterable by year, make, model, trim, and body style so the correct part ships the first time. Black Ops Auto Works carries 2,389 exterior styling SKUs across aerodynamic, carbon fiber, and badge and trim categories. What This Collection Covers Exterior Styling groups together the parts that change the visual character and aerodynamics of a vehicle, from functional front splitters and rear diffusers to purely cosmetic badges and mirror covers. This collection combines Black Ops Auto Works in-house carbon fiber and fiberglass components with...
View Exterior Styling Products
Exterior Trim
Exterior trim parts and accessories for Jeep Grand Cherokee Trackhawk, RAM 1500 TRX and RHO, Dodge Charger and Challenger Hellcat and SRT, and Dodge Durango platforms are stocked at Black Ops Auto Works. Shop badges, emblems, mirror covers, grille overlays, carbon fiber accent trim, headlight covers, rear steps, trunk latch covers, and tailgate hardware for Mopar and Trackhawk builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 478 exterior trim SKUs across badge, mirror, grille, and carbon fiber accent categories. What This Category Covers Exterior trim upgrades cover the badges, emblems, mirror covers, grille overlays, carbon fiber accents, and tailgate hardware that finish the visual details on a performance truck or muscle car build once the mechanical foundation is already sorted. Factory chrome badges, plastic mirror covers, and generic emblems are the most commonly re...
View Exterior Trim Products