-10%
Click to zoom in
SKU: FTS21307 / UPC: 674866136236
Fabtech 2025 Chevrolet Silverado 1500 and GMC Sierra 1500 3-Inch Uniball Upper Control Arm System Component Box
The Fabtech 3-inch Uniball Upper Control Arm (UCA) System Component Box. This direct-fit assembly delivers precise suspension geometry for enhanced on-road stability and off-road capability, allowing your truck to handle larger tires up to 33 inches without compromising alignment or introducing CV bind at full droop. Built for daily drivers and trail enthusiasts alike, this system replaces factory upper control arms to support a 3-inch front lift while preserving factory ride dynamics and ensuring long-term durability under demanding conditions.
Key Fitment Details
- Year: 2025
- Make/Model: Chevrolet Silverado 1500 Pickup (2WD/4WD); GMC Sierra 1500 Pickup (2WD/4WD)
- Lift Compatibility: Designed for use with 3-inch lift kits like Fabtech K1213 or K1214 provides necessary caster correction for proper wheel alignment
Exclusions: Does not fit models with adaptive ride control or electronic suspension confirm compatibility for Denali/AT4 trims
What's Included in the FTS21307 Component Box
This complete component box contains everything required for a straightforward installation on your 2025 GM 1500:
- Pair of forged aluminum Uniball Upper Control Arms (driver and passenger side)
- 1-inch stainless steel Uniball bearings (heat-treated 17-4 stainless steel for corrosion resistance and smooth articulation)
- Precision-machined stainless steel misalignment spacers for full suspension travel clearance
- High-density urethane bushings on frame-side pivots to minimize noise and vibration
- All necessary Grade 8 hardware, including bolts, nuts, and washers for bolt-on installation
- Detailed installation instructions (no drilling or welding required; installs in approximately 2-3 hours with basic tools)
Technical Specifications
- Construction: Heavy-duty 2.5-inch diameter tubing with reinforced box-section design for maximum strength powder-coated black finish for rust protection
- Uniball Specs: 1-inch inner diameter Uniball with grease fittings for easy maintenance rated for 1,500+ hours of extreme use
- Alignment Benefits: Built-in caster adjustment of +2.5 degrees to maintain factory toe and camber settings post-lift
- Tire/Wheel Fitment: Clears up to 33x12.50R20 tires on 9-inch wide wheels; maintains fender clearance without trimming
- Warranty: Lifetime limited warranty against defects in materials and workmanship (excludes normal wear on bushings and bearings)
Packaging and Shipping Information
- Part Number: FTS21307
- UPC: 674866136236
- Component Weight: Approximately 28 lbs (pair of UCAs with hardware)
- Shipping Box Dimensions: 23 inches (length) x 12 inches (width) x 7 inches (height)
- Shipping Weight: 32 lbs (includes packaging)
The Fabtech FTS21307 stands out as the practical choice for 2025 Silverado 1500 and Sierra 1500 owners seeking reliable lift performance. Its robust Uniball design outperforms standard ball joint arms by reducing flex and bind, resulting in sharper steering response and consistent handling across varied terrain. Install this component box to unlock your truck's full potential whether navigating highways or conquering rough trails while keeping maintenance simple and costs down compared to full aftermarket overhauls.
Order now for seamless integration with your existing or planned 3-inch suspension setup.
NOTE: Pictures are for reference only and does not represent what you will receive.
Alignment Components
Shop alignment components at Black Ops Auto Works for premium camber kits, caster kits, control arms, toe links, shock mounts, camber plates, and suspension alignment parts designed to improve handling, tire wear, steering response, and suspension geometry. Whether you are dialing in a street car, correcting alignment after lowering your vehicle, or building a track-ready or off-road setup, this collection features high-quality components built for fitment, adjustability, and long-term performance. Shop Alignment Components by Category Browse alignment parts and suspension geometry upgrades across popular product categories, including: Alignment kits Camber kits Caster kits Adjustable control arms Upper control arms Rear toe links and toe arms Shock mounts and camber plates Alignment correction components Suspension geometry upgrades Vehicle-specific alignment hardware These parts are designed to help improve wheel alignment settings, reduce uneven tire wear, increase stability,...
View Alignment Components Products
Control Arms
Control arms are the key suspension linkages that connect the wheel hub and knuckle assembly to the vehicle frame, controlling wheel travel through both compression and droop cycles. Worn OEM control arms with loose ball joints or deteriorated bushings cause vague steering, tire wear, and handling inconsistency that only go away with replacement or upgrade.Popular UpgradesTubular steel upper control arms for lifted trucks and SUVs are the most popular upgrade in the control arm category, correcting the geometry compromised by a suspension lift and restoring proper caster angle and ball joint centering. Adjustable upper control arms allow alignment angles like caster and camber to be dialed in precisely after a lift or lowering modification. Replacement lower control arms with polyurethane or solid aluminum bushings improve response and longevity compared to worn OEM rubber mounts.Why do I need new control arms after a lift kit?A suspension lift changes the angle at which the OEM upp...
View Control Arms Products
Fabtech
Fabtech is a California-based suspension lift kit and off-road suspension manufacturer that has been engineering lift systems, control arms, sway bar disconnects, steering components, and performance shocks specifically for popular light trucks and SUVs since 1984. The brand's commitment to proper engineering, including in-field testing on real vehicles and multiple fit checks before releasing any kit, produces suspension systems that integrate cleanly with factory TPMS sensors, electronic stability control, and factory ABS systems that many cheaper lift kit manufacturers ignore. Fabtech lift kits for Ford F-150, F-250, F-350 Super Duty, Chevrolet Silverado, GMC Sierra, Toyota Tacoma, Ford Bronco, and Jeep Wrangler are among the most popular because the brand covers all major market truck platforms with model-year specific kits rather than generic universal designs. Serious off-road enthusiasts and truck owners who plan to run 33 to 40-inch tires with confidence that the suspension ...
View Fabtech Products
Suspension
Aftermarket suspension systems improve handling, ride quality, and ride height adjustment beyond what the factory suspension provides. From lowering springs and coilover kits for sport handling to lift kits and leveling kits for truck and SUV off-road capability, quality suspension components transform how a vehicle rides and handles. Popular Suspension Upgrades Popular suspension upgrades include coilover kits for adjustable ride height and damping, sport lowering springs for improved handling and reduced body roll, performance shock absorbers and strut assemblies, sway bar and end link upgrade kits, subframe brace kits, and complete suspension packages for lifted trucks and off-road SUVs. Alignment kits including camber bolts and camber arms are also frequently ordered after ride height changes. What is the difference between coilovers and lowering springs? Coilovers are complete shock and spring assemblies with adjustable ride height set by threading the spring perch on the shock...
View Suspension ProductsLet customers speak for us
Looks pretty nice
Looks pretty nice, pricing was good and the reinforcement is a big plus.
Randy H.
Black Ops Auto Works
I emailed customer service to inquire about when it would be shipped
I emailed customer service to inquire about when it would be shipped. They checked and emailed me with the answer. Customer service is A1
Ralph J.
Black Ops Auto Works
Installation was easy
Installation was easy. The price is good and it looks great on the truck.
Ralph J.
RHO Small Grille Badge
Looks as good as it fits
Looks as good as it fits,
zachary d.
Seibon 70-73 Datsun 240Z OE Carbon Fiber Hood
Nothing like it
I love it great sound and response
Luis P.
Legmaker Dodge Durango HEMI Short Ram CAI 2011-Present 5.7L
Car totally diferent with the whole kit
Car totally diferent with the whole kit. Ive stood next to wide bodies and my car gets more attention at times . Ive bought the kit twice already.
Ding D.
2015-2023 Dodge Charger Carbon Fiber Wind Splitters
Fantastic emblem! Exactly what I was looking for
Fantastic emblem! Exactly what I was looking for. Great quality emblem.
Jacobus S.
Direct Connection Black Metallic Fender Badge
Worked great for my aftermarket hood on my Chrysler 2023 300C
Worked great for my aftermarket hood on my Chrysler 2023 300C. Thanks
Robert G.
Windshield Washer Squirter Relocation Kit Universal
Easy to install and makes car sound even better
Easy to install and makes car sound even better love the winn
Tracy H.
Legmaker Challenger/Charger Hellcat Demon & Redeye Air Intake
Awesome customer support
Awesome customer support. Had multiple issues with fedex and these guys were excellent in helping me sort everything out. The drop springs are great too! I highly recommend
Anonymous
Swift Spec-R Lowering springs Jeep Grand Cherokee 2011-2021
100/100! perfect CF crafted cold air intake for 6
100/100! perfect CF crafted cold air intake for 6.4 jeep .. even makes my AWE exhaust sound even deeper and you cam here this thing sucking when accelerating even at normal speeds🥶
srt.boizzz
Legmaker 392 TH Short Ram Jeep Grand Cherokee SRT 2012-2021
