Fuel Injector Connection FICLS50 fuel injector view 1
Fuel Injector Connection FICLS50 fuel injector view 2
Click to zoom in
View vehicle applications

Description

Build the fuel system around the correct flow and connection

Fuel Injector Connection FICLS50 supports the stated flow, fuel, electrical, and physical configuration. Flow rate: 50LB @ 4 Bar and 42LB @ 3 Bar

Features

  • Bosch 0280155968
  • Tuning is a snap as it is the same injector that is programmed in the LS1 computer
  • Full data for HP Tuners and EFI available upon request.

Fitment & Requirements

Scope Requirement
Component-specific application This injector set is 100% flow matched. These flow 50lb/hr in the LS1 Rail

Part Numbers & Options

Option Manufacturer Part Number
Default FICLS50

Specifications

Detail Value
Product Type Fuel Injector
Package Detail Set of 8
Flow Rating Flow rate: 50LB @ 4 Bar and 42LB @ 3 Bar
Flow Rating 2 This injector set is 100% flow matched. These flow 50lb/hr in the LS1 Rail

What's Included

  • The exact selected product or set shown in the Part Numbers & Options table
  • Set of 8
  • Unlisted injectors, rails, wiring, fittings, tuning, tools, and installation hardware are not included

About Fuel Injector Connection

Fuel Injector Connection supplies flow-matched fuel injectors, connection components, service parts, and supporting fuel-system hardware. Correct selection depends on the exact flow, electrical, dimensional, spray-pattern, quantity, and engine requirements rather than a similar-looking injector alone.

Related Parts

  • No external product is linked. Verify any injector adapters, rails, seals, pumps, or tuning components against an ACTIVE Black Ops Auto Works listing for the exact application before purchase.

FAQ

What is the FICLS50?

It is the exact fuel injector and configuration described in the fitment and specification sections above.

Is this selected by vehicle model alone?

No. Confirm every stated engine, connector, rail, length, flow, and package requirement that applies to this exact item.

Is tuning required?

Fuel-system and injector changes can require calibration. Use qualified tuning guidance for the exact engine, fuel, injector data, and operating pressure.

Does the listing include every surrounding fuel-system part?

No. Only the components stated in the What's Included section are included.

Can a related part number be substituted?

No. A different flow rate, length, connector, spray pattern, quantity, or adapter package is a different configuration.

Which fuel can be used?

Use only the fuels explicitly listed in the specifications and current manufacturer data for this exact configuration.

What should be checked before installation?

Verify the part label, seals, connector, rail fit, quantity, fuel compatibility, and calibration requirements before opening the fuel system.

Who should install fuel-system components?

A qualified technician should depressurize the system, follow the vehicle service procedure, prevent contamination, and leak-check the completed installation.

Installation Instructions

  1. Confirm the Fuel Injector Connection part label and every fitment, connector, dimension, flow, quantity, and fuel requirement before installation.
  2. Review the vehicle, engine, or component service procedure and disconnect electrical power where required.
  3. Relieve fuel-system pressure safely and work in a ventilated area away from sparks, flame, and hot surfaces.
  4. Keep all ports and components clean, replace only the seals specified for the exact application, and do not force mismatched connectors or fittings.
  5. Install the component in the documented orientation and tighten fasteners or fittings to the applicable current specification.
  6. Restore pressure, inspect every disturbed connection for leaks, confirm normal operation, and complete any required calibration before road use.

Fuel Injector Connection FIC LS Series 50 LB @ 4 Bar for LS1/6 Set of 8

FICLS50
Fuel Injectors
Same Day or Next Business Day
$ 520.00
$ 520.00

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×