View vehicle applications
Fitment notes and restrictions
Description
Restore the supported system with the matching service spring
Firestone 9055 provides the replacement spring configuration represented by this listing, with compatibility governed by the fitment and technical requirements below.
Key Features
- Part number 9055 is mapped only to the applications shown in the fitment table
- Spring performance can be altered as easily as inflating a tire.Firestone Coil-Rite air helper springs are made of durable, elastic polyurethane, providing years of comfort and stability to your vehicle.
- The air springs will support 500-1000 lbs. per set (not to exceed vehicle's GVWR).
- If you're looking for a smoother ride for your vehicle that has a coil spring suspension, Firestone Coil-Rite air helper springs are what you need.
- Coil-Rite Air Helper Springs are designed to work in temperatures between 180deg F (82deg C) and -40deg F (-40deg C).
- Service replacement for the matching Firestone air-spring configuration
- Restores a worn or damaged spring without replacing unrelated system components
- Requires exact cross-reference, mounting pattern, port, and dimensional confirmation
Fitment
| Years or Scope | Make | Model or System | Application Notes |
|---|---|---|---|
| 2010-2014 | Ford | F-150 | Verify part number 9055; SVT Raptor |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 9055 |
| Brand | Firestone |
| Product Type | Air Springs |
| Product Family | Ride-Rite |
| Condition | New |
What's Included
- Package identified for Firestone 9055
- One matching Firestone replacement air spring
- Air-helper springs, compressor hardware, controls, fittings, wiring, or mounting parts not expressly listed for this package are not included
About Firestone
Firestone Airide develops serviceable air-spring systems and exact replacement configurations. Correct pressure, component matching, mounting clearance, and installation are essential to reliable operation, and air-helper products do not raise the vehicle manufacturer's load ratings.
Related Parts
- The matching opposite-side or companion air spring when inspection shows wear
- Approved replacement air line and fittings
- The original Firestone brackets and hardware only when they remain serviceable
FAQ
What is the 9055?It is the Firestone replacement spring configuration described by this listing and the specifications below.
Does this product increase payload or GVWR?No. Air-suspension support can help level a properly loaded vehicle, but it does not change any vehicle, axle, tire, hitch, or payload rating.
How should compatibility be confirmed?Use the fitment table for a vehicle-specific kit. For a service or universal component, match every listed dimension, port, pressure, electrical, mounting, and system requirement.
Are unrelated air-suspension parts included?No. Only the components stated in the package section are included; compressors, springs, tanks, controls, brackets, plumbing, and wiring are separate unless expressly listed.
Is professional installation recommended?Yes when the work involves structural mounting, vehicle wiring, brake or fuel-line clearance, suspension travel, or pressure-rated plumbing.
What should be checked after installation?Check fastener torque, air-line routing, component clearance, operating pressure, and every connection for leaks after the initial drive and during routine service.
Can similar-looking Firestone parts be substituted?No. Similar appearance does not establish compatibility; the exact configuration and application requirements must match.
Where should the current installation procedure come from?Use the current Firestone instructions for the exact product together with the vehicle service information and any application notes.
Does air pressure stay the same for every load?No. Pressure should be adjusted within the supported range for the actual load while maintaining safe ride height, clearance, and vehicle ratings.
Installation Instructions
- Read the current Firestone instructions and inventory every supplied component before disassembly.
- Verify the package label and Firestone part number 9055 against the fitment table before removing factory components.
- Confirm the application, mounting space, suspension travel, pressure requirements, and safe routing for air lines and wiring.
- Support the vehicle safely and protect brake lines, fuel lines, electrical harnesses, exhaust components, and moving suspension parts.
- Install the component and supplied hardware in the specified orientation without forcing mismatched brackets, ports, or fittings.
- Route pressure-rated air line with square cuts and keep it clear of heat, abrasion, sharp edges, and pinch points.
- Complete any electrical connection with the specified fuse protection, wire routing, and battery-disconnection procedure.
- Torque fasteners to the applicable Firestone or vehicle specification and verify full suspension and steering clearance.
- Pressurize the system gradually, leak-test every connection, and confirm correct control operation before driving.
- Recheck pressure, leaks, clearance, and fastener torque after the initial drive and during regular maintenance.




