Size Chart
×
PART #1461
FEATURES:Please Note:
These BBK Short Mid Pipes require the use of O2 wire harness extensions - these are not included and are recommended for installation - See Part #1110
Complete Your Long Tube Header Install
Crank up the power potential of your 2011-2014 Ford Mustang V6 with this catted BBK Performance 2-3/4" short x-pipe. This BBK midpipe will dramatically increase the sound of your Mustang to a roar that will be sure to turn heads. Not only is this 2-3/4" midpipe required to finish your long tube header install, it further increases exhaust flow aiding in more horsepower and torque and better throttle response.
High Quality
BBK Performance short x-pipes are designed from 2-3/4" mandrel bent stainless steel tubing with high flow catalytic converters for maximum exhaust flow. The x-pipe features rear oxygen sensor bungs in the factory location making installation a breeze.
Emissions
Please Note: The new catalytic converters used in the manufacture and production of ALL BBK Performance high flow H and X exhaust pipes meet Federal EPA requirements. (N/CE - New aftermarket Converter) Federal Catalytic Converters are not legal for sale, installation or use on ANY licensed vehicle in the State of California. These converters do NOT carry an Executive Order number (EO number) and are NOT California CARB approved. Please check your state and local emissions laws to ensure compliance.
Emissions Information
Currently this part is NOT C.A.R.B Approved and cannot be installed for use on any emission controlled vehicle in California.
It cannot be sold or shipped to any California resident or addressee.

This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2014 | Ford | Mustang | Base |
| 2012-2013 | Ford | Mustang | Boss 302 |
| 2011-2014 | Ford | Mustang | GT |
| 2011-2014 | Ford | Mustang | Shelby GT500 |
BBK Performance parts and bolt-on upgrades for Ford Mustang, Chevrolet Camaro, Chevrolet Corvette, Dodge Challenger, Dodge Charger, and RAM 1500 HEMI trucks are stocked at Black Ops Auto Works. Shop BBK throttle bodies, long tube headers, shorty headers, cold air intakes, cat back exhaust, mid pipes, header gaskets, O2 sensor extensions, and replacement air filters for Coyote, LS, LT, and HEMI 5.7/6.1/6.4 platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 307 BBK SKUs across intake, exhaust, throttle body, and fuel delivery categories. What This Brand Covers BBK Performance has built bolt-on performance parts in the USA since 1988, founded by Brian Barry in Southern California. The company runs two US facilities with nearly 200,000 square feet dedicated to R and D, manufacturing, and distribution for domestic performance vehicles. BBK focuses on dyno proven gains rather ...
View BBK Products
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products
Ford Mustang parts and accessories for every generation are stocked at Black Ops Auto Works. Shop cold air intakes, cat-back and axle-back exhaust systems, headers, coilovers, lowering springs, sway bars, brake pads, brake rotors, big brake kits, carbon fiber body parts, wheel spacers, fuel system components, and lighting upgrades for the Fox Body, SN95, New Edge, S197, and S550/S650 platforms, including EcoBoost, GT, Mach 1, Shelby GT350, Shelby GT500, and Dark Horse. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 2,101 Ford Mustang SKUs across suspension, brakes, exhaust, intake, exterior, and drivetrain categories. What This Collection Covers The Ford Mustang has run through six generations since 1964, and each one uses different suspension geometry, brake hardware, exhaust routing, and body dimensions. This collection groups parts confirmed to fit specific Mustang generatio...
View Ford Mustang Parts & Accessories Products
Mid pipes, X-pipes, and H-pipes for domestic and import performance vehicles are stocked at Black Ops Auto Works. Shop Corsa PRO-Series X-pipes and H-pipes, Solo Performance connecting pipes, BRE Exhaust front pipes, MBRP mid-pipe kits, and AWE and Akrapovic link pipes for Dodge, Jeep, Ford, Corvette, Camaro, BMW, and Subaru platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 326 mid pipe SKUs across configuration and vehicle platform. What This Category Covers Mid pipes connect the headers or manifold to the rear exhaust section, and often house the high flow catalytic converters and X-pipe or H-pipe crossover design that shapes the exhaust tone and flow characteristics of the system. This collection covers high flow cats, X-pipes, H-pipes, connecting pipes, front pipes, and mid-pipe kits. Categories Included High flow catalytic converter pipes, X-pipes, H-pipes, connect...
View Mid Pipes Products