View vehicle applications
Fitment notes and restrictions
Description
Cross exhaust banks that approach from opposite directions.
Formula Z Performance 225-OPP0000SS is engineered for universal custom exhaust layouts with opposing 2.250-inch inlet paths, including tightly packaged rear-engine installations. Use the verified dimensions and installation requirements below to confirm the exact configuration before fabrication.
Key Features
- Opposing inlet geometry for counter-direction routing
- Short overall length with a taller vertical stack
- Constant cross-sectional area through the crossover
- 316L stainless steel DMLS and SLM construction
Fitment & Requirements
Universal Fit: This is a fabrication component, not a direct-fit year-make-model part.
- Universal fabrication component; named vehicles are layout examples, not verified direct fitment
- Match 2.250-inch exhaust tubing and verify all clearances
- Welding is required
- Install downstream of all emissions components
Part Numbers & Options
- Manufacturer part number: 225-OPP0000SS
- Configuration: Opposing Z-Pipe
Specifications
| Detail | Value |
|---|---|
| Connection size | 2.250-inch ID |
| Material | 316L stainless steel |
| Manufacturing | DMLS and SLM additive manufacturing |
| Overall dimensions | 8.25 x 4.15 x 5.43 inches |
| Installation | Welding required |
What's Included
- One Formula Z Performance crossover
About Formula Z Performance
Formula Z Performance develops compact additively manufactured exhaust components with internal geometries intended for packaging and flow paths that conventional bent tubing cannot reproduce.
Related Parts
FAQ
What is the 225-OPP0000SS?It is the opposing z-pipe described on this page.
Is this a direct-fit vehicle part?No. It is a universal fabrication component that must be matched by dimensions and connection geometry.
What connection size does it use?It is sized for 2.250-inch ID.
What material is used?The manufacturer specifies 316L stainless steel.
What is included?One Formula Z Performance crossover is included.
Is welding required?Yes. The manufacturer specifies a welded installation.
How should compatibility be checked?Confirm tubing size, orientation, dimensions, and surrounding clearance before fabrication.
Does the finish require special care?Minor surface variations are normal for additive-manufactured stainless parts; clean with products suitable for stainless steel.
Installation Instructions
- Verify the exact part, connection size, routing, and all required clearances before cutting the existing exhaust.
- Position the component in the manufacturer-specified orientation and confirm symmetry and surrounding clearance.
- Have a qualified exhaust fabricator complete the required cutting, alignment, and welding.
- Inspect all joints, fasteners, nearby heat-sensitive parts, and clearance through the full range of vehicle movement.
- After the first heat cycle, recheck the installation for leaks, contact, or movement.




