Formula Z Performance 45-Degree Inlet Classic Z-Pipe angled view for 300-CLA4500SS
Formula Z Performance 45-Degree Inlet Classic Z-Pipe angled view for 300-CLA4500SS
Formula Z Performance 45-Degree Inlet Classic Z-Pipe front view for 300-CLA4500SS
Formula Z Performance 45-Degree Inlet Classic Z-Pipe dimensional drawing for 300-CLA4500SS
Click to zoom in
View vehicle applications

Description

Meet angled exhaust routing without reducing crossover area.

Formula Z Performance 300-CLA4500SS is engineered for universal custom dual-exhaust systems with 3.000-inch tubing that approach the crossover at a 45-degree angle. Use the verified dimensions and installation requirements below to confirm the exact configuration before fabrication.

Key Features

  • 45-degree inlet geometry for angled pipe approaches
  • Constant cross-sectional area through the crossover
  • 316L stainless steel construction
  • DMLS and SLM additive manufacturing

Fitment & Requirements

Universal Fit: This is a fabrication component, not a direct-fit year-make-model part.

  • Universal fabrication component; no year-make-model fitment applies
  • Match 3.000-inch tubing and verify angle, width, height, and surrounding clearances
  • Welding is required
  • Install downstream of all emissions components

Part Numbers & Options

  • Manufacturer part number: 300-CLA4500SS
  • Configuration: 45-Degree Inlet Classic Z-Pipe

Specifications

Detail Value
Connection size 3.000-inch ID
Material 316L stainless steel
Manufacturing DMLS and SLM additive manufacturing
Overall dimensions 11.38 x 3.65 x 9.40 inches
Installation Welding required

What's Included

  • One Formula Z Performance crossover

About Formula Z Performance

Formula Z Performance develops compact additively manufactured exhaust components with internal geometries intended for packaging and flow paths that conventional bent tubing cannot reproduce.

Related Parts

FAQ

What is the 300-CLA4500SS?

It is the 45-degree inlet classic z-pipe described on this page.

Is this a direct-fit vehicle part?

No. It is a universal fabrication component that must be matched by dimensions and connection geometry.

What connection size does it use?

It is sized for 3.000-inch ID.

What material is used?

The manufacturer specifies 316L stainless steel.

What is included?

One Formula Z Performance crossover is included.

Is welding required?

Yes. The manufacturer specifies a welded installation.

How should compatibility be checked?

Confirm tubing size, orientation, dimensions, and surrounding clearance before fabrication.

Does the finish require special care?

Minor surface variations are normal for additive-manufactured stainless parts; clean with products suitable for stainless steel.

Installation Instructions

  1. Verify the exact part, connection size, routing, and all required clearances before cutting the existing exhaust.
  2. Position the component in the manufacturer-specified orientation and confirm symmetry and surrounding clearance.
  3. Have a qualified exhaust fabricator complete the required cutting, alignment, and welding.
  4. Inspect all joints, fasteners, nearby heat-sensitive parts, and clearance through the full range of vehicle movement.
  5. After the first heat cycle, recheck the installation for leaks, contact, or movement.

Formula Z 3-Inch 45-Degree Inlet Classic Z-Pipe

300-CLA4500SS
Exhaust Pipes
Same Day or Next Business Day
$ 1,349.00
FREE Ground Shipping!
$ 1,349.00

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×