-5%
Click to zoom in
Put a critical race function under your thumb
Granatelli 810101B combines a compact sealed momentary switch with a retractable coiled lead, giving steering-wheel controls room to move without leaving a long loose wire in the cockpit.
Key Features
- 10-amp momentary switching
- Compact black pin-head actuator
- Sealed billet-body construction
- 6-foot retractable coiled cord when fully extended
- Two 18-gauge internal conductors
- 0.625-inch body diameter
- 5/8-24 threaded mounting base
- Made in the USA
- 90-day manufacturer warranty
Fitment
| Years | Make or Application | Model or Dimensions | Verified Notes and Exclusions |
|---|---|---|---|
| Universal | Custom race wiring | Steering-wheel or panel-mounted control | Confirm 0.625-inch body clearance, 5/8-24 mounting, circuit current, cord routing, and relay requirements |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 810101B |
| Switch Type | Momentary push button |
| Current Rating | 10 amps |
| Color | Black |
| Cord | Retractable coiled; 6 feet fully extended |
| Conductors | Two 18-gauge wires |
| Body Diameter | 0.625 inch |
| Mounting Thread | 5/8-24 |
| UPC | 802735047820 |
| Country of Origin | USA |
What's Included
- One black momentary push button switch
- One attached 6-foot retractable two-wire cord
- One mounting lock nut and washer
- Mounting bracket, steering-wheel plate, relay, fuse, connectors, and unrelated wiring are not included
About Granatelli Motor Sports
Granatelli Motor Sports develops ignition, induction, electronics, and race-control hardware for performance vehicles. Its compact switches are designed for custom cockpit installations where positive activation and managed wiring are important.
Related Parts
- A Granatelli switch plate selected for the steering-wheel layout
- A correctly rated relay and fuse for the controlled load
- A connector or quick-disconnect selected for the steering system
FAQ
What is the 810101B?It is a black 10-amp momentary push button with an attached retractable two-wire cord for custom race controls.
Which functions can it control?It can trigger a correctly designed transbrake, line-lock, boost, staging, nitrous-purge, or other momentary control circuit.
How long is the cord?The coiled cord extends to six feet according to the manufacturer.
What wire size is inside the cord?The manufacturer specifies two 18-gauge internal conductors.
What mounting hole is required?Confirm clearance for the 0.625-inch body and the 5/8-24 threaded mounting base.
Is a mounting plate included?No. The lock nut and washer are included, but a steering-wheel switch plate or bracket is sold separately.
Can it carry every accessory load directly?No. Verify current draw and use an appropriate relay and circuit protection when the controlled device requires them.
Is this vehicle-specific?No. It is a universal electrical component that must be integrated into a properly designed circuit.
Installation Instructions
- Plan the switch location, wire path, steering movement, circuit protection, and relay before drilling or wiring.
- Disconnect vehicle power and confirm the mounting surface accepts the published body and thread dimensions.
- Mount the switch with the supplied lock nut and washer without crushing the body or binding the actuator.
- Route the coiled cord away from steering shafts, pedals, sharp edges, heat, and pinch points through the full steering range.
- Connect the two conductors to the properly fused control circuit, using a correctly rated relay when required.
- Restore power and test the momentary function while stationary.
- Recheck cord tension, steering clearance, terminal security, and circuit operation before competition use.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
Granatelli Motor Sports
Shop Granatelli Motor Sports parts for ignition service and engine, cooling or exhaust projects at Black Ops Auto Works. Compare application-specific wire sets and coils, drive-by-wire throttle bodies, thermostat references and fabrication hardware. Choose parts around the installed engine and the work you want to complete.Ignition Wires and Coil ChoicesThe ignition selection spans different engines, production ranges and distributor or coil arrangements. Compare a complete wire set with a coil replacement or connector kit according to the service needed. Match terminals, boot angle, wire routing, length and heat clearance to the actual installation before choosing a color or product series.Throttle Bodies, Sensors and CoolingThe listed Hemi throttle-body reference specifies a 95mm drive-by-wire arrangement, while airflow sensors and adapters have their own electronics and mounting applications. Review calibration or relearn requirements with your tuner. Thermostat listings distingu...
View Granatelli Motor Sports Products