-5%
Click to zoom in
SKU: 12020479
GReddy Nissan 180SX/Silvia PS13/RPS13 1989-1994 240SX 24 LS Intercooler Kit
GReddy 24 LS Intercooler Kit 12020479 provides a bolt-on front-mount system with piping for turbocharged Nissan S13 chassis vehicles including 1989-1994 240SX, PS13 Silvia, and RPS13 180SX. It cools intake air for denser charge air and detonation resistance during long runs. Expect improved throttle response and steady boost in SR20DET or KA24 turbo builds.
Key Features
- 24-inch Long Side Bar-and-Plate Core: 610mm x 300mm x 70mm size manages 350+ whp through fast heat dissipation and minimal pressure drop
- Mandrel-Bent Aluminum Piping: 2.36-inch (60mm) diameter reduces turbulence for smooth airflow from turbo to throttle body
- Cast Aluminum End Tanks: High-pressure durability with direct integration to S13 bumper beam
- Complete Hardware Kit: Stainless clamps, silicone couplers, brackets, and adapters enable straightforward bolt-on installation
- Optimized Piping Layout: Pre-bent tubes fit under stock hood and around radiator with little trimming required
Product Notes
- Designed for turbocharged SR20DET engines in swapped S13 chassis
- Inspect all connections during initial break-in for leak-free operation
- Large core may reduce front airflow. pair with high-flow radiator for track use
Installation Notes
- Professional installation recommended.
- Remove front bumper, grille, and radiator support for access
- Uses factory mounting points. compatible with T3/T4 turbo manifolds and 50mm wastegates
This Part Fits
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1989-1990 | Nissan | 240SX | XE |
| 1989-1994 | Nissan | 240SX | SE |
| 1991-1992 | Nissan | 240SX | LE |
| 1991-1993 | Nissan | 240SX | Base |
| 1989-1993 | Nissan | 180SX | RPS13 |
| 1989-1994 | Nissan | Silvia | PS13 |
Why Choose GReddy?
- Over 40 years developing cooling systems for JDM imports
- Factory-direct engineering tested on dyno and drift cars
- Precise tolerances ensure drop-in fit for S13 turbo builds
Frequently Asked Questions
-
Q: Does this kit fit a 1991 Nissan 240SX with SR20DET blacktop swap?
A: Yes, it bolts directly to S13 chassis with SR20DET. clears stock hood and OEM-style manifolds -
Q: What materials are used in construction?
A: All-aluminum bar-and-plate core, mandrel-bent pipes, and cast end tanks with stainless hardware for corrosion resistance -
Q: What warranty coverage applies?
A: GReddy provides a 1-year limited warranty against manufacturing defects. register product online for full terms
Shipping & Handling
- Method: UPS Ground or FedEx Ground
- Availability: In stock - ships same or next business day
- Packaging: Oversized box 48 x 24 x 12 inches
- Weight: 38 lbs
Forced Induction
Forced induction systems encompass every method of pushing air into an engine at greater than atmospheric pressure, including turbochargers driven by exhaust energy, superchargers driven mechanically by the crankshaft, and prochargers using centrifugal designs belt-driven at higher ratios than traditional roots-type blowers, with each approach delivering a significant increase in air mass per cylinder fill that allows proportionally more fuel to be burned and more power to be produced without increasing engine displacement. Adding 10 PSI of boost pressure to a naturally aspirated engine can increase power output by 50 to 70 percent depending on the engine's breathing efficiency and the quality of the supporting hardware, making forced induction the most power-dense modification available relative to cost and complexity. This collection covers complete forced induction systems, turbocharger and supercharger hardware, intercoolers, blow-off valves, wastegates, and supporting component...
View Forced Induction Products
Intercooler Components
Intercooler components let you build, upgrade, or repair your charge cooling system without replacing the entire intercooler assembly. Quality piping, silicone couplers, mounting brackets, and core upgrades make a meaningful difference in keeping intake temperatures low on high-boost builds and daily-driven turbocharged vehicles alike. Popular Upgrades Frequently ordered intercooler components include upgraded silicone coupler hose kits to replace cracked or blow-off-prone rubber hoses, intercooler core upgrades for higher bar-and-plate or tube-and-fin density, aluminum intercooler piping sets that replace restrictive OEM plastic pipes, and universal mounting brackets for custom intercooler positioning on fabricated builds. What causes intercooler components to fail? The most common intercooler component failure points are silicone or rubber couplers that crack or split under repeated heat cycling, plastic OEM piping that becomes brittle over time, and mounting brackets that fatigue...
View Intercooler Components Products
Intercooler Kits
A complete intercooler kit replaces or upgrades the entire charge cooling system in a single purchase, providing the intercooler core, piping, couplers, clamps, and hardware needed for a clean install. Upgraded intercooler kits are one of the most effective power-supporting modifications for any turbocharged build targeting higher boost pressure. Popular Upgrades Top-selling intercooler kits include front-mount intercooler kits for popular turbocharged platforms like the Ford Focus ST, Mustang EcoBoost, Subaru WRX, and Mitsubishi Evo, side-mount intercooler upgrades for rotary and compact turbo cars, and direct-fit top-mount intercooler upgrades for factory top-mount locations that maintain OEM fitment and aesthetics. How much power can an intercooler kit add? An intercooler kit does not add power by itself but supports power gains from increased boost pressure, aggressive tuning, or larger turbocharger upgrades by maintaining safe intake air temperatures. An oversaturated factory i...
View Intercooler Kits Products