-16%
GSC 2058-12 set of twelve VR38DETT oversize intake valves
GSC 2058-12 flat-face intake valve head detail
GSC 2058-12 VR38DETT intake valve profile detail
Click to zoom in
View vehicle applications

Description

Support high-flow VR38 cylinder-head work with a matched oversize intake set

GSC Power Division 2058-12 is a complete 12-piece intake-valve set for Nissan VR38DETT cylinder heads prepared for a 38.15 mm, 1 mm oversize flat-face valve. Modified 21-4N stainless steel, micro-polished stems, and a high-flow head profile are intended for professionally machined performance builds rather than a drop-in repair.

Key Features

  • Complete set of 12 intake valves for one VR38DETT engine
  • 38.15 mm head diameter is 1 mm oversize relative to the standard application
  • Flat-face valve-head configuration
  • Modified 21-4N stainless-steel construction
  • Micro-polished stems reduce surface friction and oil drag
  • Swirl-polished and back-cut head design supports airflow and reduced mass
  • GSC identifies the design for extreme-horsepower VR38DETT use

Application details and restrictions

Application Basis Verified Engine Requirements and Restrictions
Engine and machined cylinder-head configuration Nissan VR38DETT Requires professional valve-seat machining and measurement for a 38.15 mm +1 mm oversize intake valve, plus verification of stem, guide, keeper, installed height, piston clearance, spring, retainer, camshaft, and lash compatibility

Specifications

Detail Value
Manufacturer Part Number 2058-12
Product Type Flat-face oversize intake-valve set
Quantity 12 intake valves
Engine Family Nissan VR38DETT
Head Diameter 38.15 mm / 1.502 in
Oversize +1.00 mm
Overall Length 94.95 mm / 3.738 in
Stem Diameter 5.97 mm / 0.235 in
Face Flat
Material Modified 21-4N stainless steel
California Proposition 65 Chromium hexavalent compounds and metallic nickel warning applies; review the manufacturer warning

What's Included

  • set of 12 flat-face +1 mm oversize intake valves
  • Valve springs, retainers, keepers, guides, seals, cylinder-head machining, and assembly labor are not included

About GSC Power Division

GSC Power Division engineers valvetrain components using 3D design, finite-element analysis, flow simulation, and CNC manufacturing. Exact valve dimensions and professional cylinder-head preparation remain essential because oversize valves alter seat geometry, clearances, and the complete valvetrain relationship.

Related Parts

  • Select valve guides, seals, springs, retainers, keepers, camshafts, and machine work only after the engine builder verifies the complete VR38DETT combination; no unverified internal product link is included.

FAQ

What is the 2058-12?

It is oversize intake valve set for Nissan VR38DETT cylinder heads machined for this exact +1 mm oversize intake-valve specification.

What application must be confirmed before ordering?

Confirm the VR38DETT cylinder head, 38.15 mm seat machining, stem and guide dimensions, installed height, spring and retainer combination, keeper groove, camshaft, lash, and piston-to-valve clearance before ordering.

What is included?

The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.

Is this a universal product?

No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.

Does the listing include unrelated installation parts?

No. Only the exact component or kit identified in the included-items section is supplied.

Should existing components be inspected?

Inspect and measure the cylinder heads, seats, guides, seals, springs, retainers, keepers, followers, camshafts, lash components, and piston-to-valve clearance during the build.

Is professional installation recommended?

Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.

What should be checked after installation?

Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.

Installation Instructions

  1. Have the engine builder confirm the VR38DETT application and every published valve dimension before machining or assembly.
  2. Disassemble, clean, crack-check, and dimensionally inspect the cylinder heads, guides, seats, and related valvetrain components.
  3. Machine and finish the intake seats for the 38.15 mm oversize valves using the engine builder's verified seat geometry and concentricity requirements.
  4. Measure stem-to-guide clearance, installed height, keeper engagement, spring pressure, retainer clearance, lash range, and valve-to-piston clearance for every cylinder.
  5. Clean all components after machining, lubricate them with approved assembly products, and assemble the valvetrain to the engine builder's documented specifications.
  6. Perform leak, rotation, timing, lash, and clearance checks before startup, then follow the engine builder's break-in and inspection procedure.

GSC 38.15mm Flat-Face Intake Valve Set for Nissan VR38DETT

GSC2058-12
Valves
6 Units In Stock
$ 368.67 $ 308.37
$ 308.37

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×