View vehicle applications
Fitment notes and restrictions
Description
Move each wheel outward 10 mm with a hub-matched spacer pair
H&R 2055577A is a silver Trak+ DR-system wheel-spacer pair with 10 mm thickness per side, a 5x112 bolt pattern, 57.1 mm center bore, and M14x1.5 bolt applications. Longer wheel bolts are required and sold separately; complete hub, wheel-seat, bolt-length, brake, tire, and body clearance must be confirmed.
Key Features
- H&R 2055577A is matched to the verified application and configuration
- Two 10 mm DR-system spacers
- 5x112 bolt pattern
- 57.1 mm center bore
- M14x1.5 wheel-bolt applications
- High-strength lightweight alloy construction
- Hubcentric full-contact design
- Longer wheel bolts required and sold separately
- Application and clearance checks required at both axles
Application details and restrictions
| Years | Makes and Models | Requirements |
|---|---|---|
| 2019-2026 | Volkswagen Jetta; selected Arteon, Tiguan, Taos, ID.4 and ID. Buzz applications | 5x112 hub, 57.1 mm center bore, M14x1.5 bolts, and sufficient 10 mm spacer clearance. |
| 2022-2026 | Selected Audi Q4 e-tron and Q4 e-tron Sportback applications | Confirm H&R application, axle placement, hub lip, wheel pocket, and longer bolt seat and length. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 2055577A |
| Series | Trak+ DR |
| Quantity | Two spacers |
| Thickness | 10 mm per spacer / 20 mm per axle |
| Bolt Pattern | 5x112 |
| Center Bore | 57.1 mm |
| Thread Application | M14x1.5 |
| Material | High-strength aluminum alloy |
| Finish | Silver anodized |
| Longer Bolts | Required; sold separately |
What's Included
- One exact H&R 2055577A pair of 10 mm Trak+ DR spacers
- Only documentation supplied in the sealed H&R package
- Longer wheel bolts, locks, wheels, tires, and tools are not included
About H&R
H&R develops vehicle-specific springs, coilovers, and Trak+ wheel-spacing systems. Spacer selection requires both manufacturer application data and physical checks of the hub, wheel, fastener seat, available thread engagement, brake clearance, tire clearance, and body clearance.
Related Parts
- Longer M14x1.5 wheel bolts with the correct seat and added length are required; select them only after measuring the original hardware and wheel. No unverified internal link is included.
FAQ
What is the 2055577A?It is hubcentric wheel spacer pair for the supported 5x112, 57.1 mm hub applications with compatible M14x1.5 wheel bolts.
What application must be confirmed before ordering?Confirm the H&R application, axle position, 57.1 mm hub, 5x112 wheel, hub-lip depth, wheel pockets, bolt seat, required additional bolt length, thread engagement, and full tire and body clearance.
What is included?The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.
Is this a universal product?No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.
Does the listing include unrelated installation parts?No. Only the exact component or kit identified in the included-items section is supplied.
Should existing components be inspected?Inspect wheel bearings, hub faces, studs or threads, wheels, tires, brake components, and existing fasteners before installation.
Is professional installation recommended?Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.
What should be checked after installation?Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.
Installation Instructions
- Confirm H&R 2055577A, the application, and every listed restriction before installation.
- Safely lift the vehicle, remove the wheel, and clean rust and debris from the hub and wheel mounting faces.
- Test-fit the spacer fully against the hub without rocking and verify the wheel seats fully against the spacer.
- Install longer M14x1.5 wheel bolts with the correct seat and additional length, then hand-start every bolt.
- Torque in the vehicle-specified cross-pattern and verify brake, suspension, tire, and body clearance through steering and suspension travel.
- Recheck wheel-bolt torque after the initial driving interval specified by H&R and inspect regularly.




