-9%
H&R 60155714SW black 30mm DRM wheel spacer pair
Click to zoom in
View vehicle applications

Description

Move compatible wheels outward with a hub-centric 30mm DRM spacer system

H&R 60155714SW is a black Trak+ DRM wheel-spacer pair for the verified 5x127 applications below. Each 30 mm spacer bolts to the factory hub with the supplied fastening nuts, then provides new M14x1.5 studs for mounting the wheel with the vehicle's original wheel nuts. Correct hub seating, stud clearance, wheel-pocket depth, tire coverage, and suspension clearance must all be confirmed before installation.

Key Features

  • Exact H&R 60155714SW black DRM configuration sold as a pair
  • 30 mm spacer thickness with 5x127 bolt pattern
  • Hub-centric 71.5 mm center bore
  • M14x1.5 pressed-in wheel studs
  • High-tensile aluminum alloy with black anodized corrosion-resistant finish
  • DRM design fastens to the factory studs with supplied nuts
  • Made in Germany

Application Details and Restrictions

Years Make Model Verified Application and Notes
2011-2020 Dodge Durango 5x127 pattern, 71.5 mm hub, M14x1.5 studs
2011-2020 Jeep Grand Cherokee WK2 / SRT WK2 5x127 pattern, 71.5 mm hub, M14x1.5 studs
2018-2019 Jeep Wrangler JL / Wrangler Unlimited JL Manufacturer-listed JL applications; verify wheel pockets and body clearance
2018-2025 Jeep Wrangler Unlimited JL Sport / Sahara Manufacturer lists four-cylinder, V6, and V6 diesel configurations

Specifications

Detail Value
Manufacturer Part Number 60155714SW
Product Type Trak+ DRM wheel spacer pair
Spacer Width 30 mm
Bolt Pattern 5x127
Center Bore 71.5 mm
Stud Thread M14x1.5
Material H&R high-tensile aluminum alloy
Finish Black anodized
Quantity Two spacers
Country of Manufacture Germany

What's Included

  • Two H&R 60155714SW black 30 mm DRM wheel spacers
  • Spacer-to-hub fastening nuts
  • Pressed-in M14x1.5 wheel studs
  • Wheels, tires, vehicle wheel nuts, installation labor, and unrelated service parts are not included

About H&R

H&R develops application-specific springs, suspension systems, and Trak+ wheel spacers. Its DRM spacers use a hub-centric interface, pressed-in wheel studs, and dedicated spacer-to-hub fasteners so installation depends on the exact vehicle hub, factory stud, wheel, and clearance measurements published for each application.

Related Parts

  • H&R Trak+ spacer sizes selected from the current vehicle application table
  • Replacement wheel nuts that exactly match the factory M14x1.5 thread and wheel seat
  • Wheel and tire packages with sufficient inner pockets, fender clearance, and suspension clearance

FAQ

What is the 60155714SW?

It is a pair of black 30 mm H&R Trak+ DRM wheel spacers for the verified 5x127 applications in the fitment table.

How many spacers are included?

The manufacturer supplies a pair, which services two wheel positions.

What does DRM mean for installation?

The spacer fastens to the factory hub with supplied nuts, and the wheel then mounts to the new studs using the vehicle's original wheel nuts.

Can these spacers be used with steel wheels?

H&R states that steel wheels are generally not compatible with the DRM system because original studs can protrude beyond the spacer.

Do the original studs need clearance pockets?

Yes when the original studs or supplied nuts extend past the spacer face. The wheel must have pockets deep and wide enough to prevent contact.

What thread engagement is required?

H&R specifies at least 7.5 rotations, approximately 11 mm of load-bearing thread, for M14x1.5 wheel nuts.

Should the wheel nuts be rechecked?

Yes. H&R instructs installers to re-tighten all wheel nuts with a torque wrench after approximately 100 km, using the applicable vehicle or wheel torque specification.

Is professional installation recommended?

Yes. A qualified installer should confirm hub seating, stud clearance, wheel pockets, thread engagement, tire coverage, and full wheel movement before road use.

Installation Instructions

  1. Confirm the package identifies H&R 60155714SW and the vehicle, hub, bolt pattern, center bore, thread, and wheel configuration match the verified application data.
  2. Remove the wheel and clean rust or debris from the hub center and mounting surface with suitable tools.
  3. Test the spacer against both the hub and wheel to confirm full, backlash-free seating and sufficient wheel-pocket clearance for any protruding original studs or nuts.
  4. Seat the spacer flush on the hub and hand-start the supplied fastening nuts without cross-threading.
  5. Tighten opposing nuts evenly with a torque wrench to the current vehicle, wheel, and H&R instructions; do not use an impact tool for final torque.
  6. Mount the wheel on the spacer studs, confirm at least 7.5 rotations of M14x1.5 thread engagement, and tighten the original wheel nuts in a star pattern to the specified torque.
  7. Rotate and steer the wheel through its full range to verify there is no contact with brakes, suspension, bodywork, or the spacer hardware.
  8. Recheck all wheel-nut torque after approximately 100 km and inspect the spacer and fasteners at every wheel service.

California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.

H&R Trak+ 30mm Black Wheel Spacers for Durango, Grand Cherokee and Wrangler JL

H&R
HRS60155714SW
60155714SW
Wheel Spacer Pair
3 Units In Stock
$ 239.95 $ 215.96
$ 215.96

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×