View vehicle applications
Fitment notes and restrictions
Description
Match the wheel seat and spacer stack with the correct extended bolt
H&R 1255202 is a silver wheel bolt for installations requiring an M12x1.5 thread, 52 mm threaded length, fixed R12 ball seat and 17 mm hex. It is sold individually, so order the quantity required for the verified wheel and spacer arrangement.
Key Features
- M12x1.5 thread with a 52 mm threaded shaft
- Fixed R12 Mercedes-style ball seat for wheels designed for that seat geometry
- 17 mm hex head
- Silver or natural metal finish
- Grade 10.9 construction documented by the exact-MPN retailer record
- Sold as one wheel bolt
Application details and restrictions
| Application Type | Required Thread | Required Seat | Required Length | Restriction |
|---|---|---|---|---|
| Universal dimension-specific wheel fastener | M12x1.5 | Fixed R12 ball seat | 52 mm threaded length | Use only when the wheel, hub and any spacer require all listed dimensions |
No year-make-model fitment applies. H&R identifies this seat as a Mercedes-style R12 ball seat and documents it for compatible original-wheel and spacer applications, but the vehicle name alone does not prove fitment. Confirm thread diameter and pitch, seat radius, shaft length, hex clearance and required thread engagement against the wheel, hub, spacer approval and vehicle instructions. Do not substitute a conical seat, another ball-seat radius, the black variant or a different shaft length.
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 1255202 |
| Product Type | Wheel bolt |
| Thread | M12x1.5 |
| Threaded Length | 52 mm |
| Seat | Fixed R12 ball seat |
| Hex Size | 17 mm |
| Finish | Silver or natural metal |
| Strength Grade | 10.9 |
| GTIN | 4048419008206 |
| Quantity | One wheel bolt |
What's Included
- One silver M12x1.5 wheel bolt with 52 mm threaded length, R12 ball seat and 17 mm hex
- Wheel, spacer, locking key and additional wheel bolts are not included
About H&R
H&R develops suspension and wheel-spacing components and specifies matching fastening hardware by thread, length, seat and hex size. Its catalogs separate individual bolts from set part numbers so the fastener quantity and exact dimensions can be selected for the installation.
Related Parts
- No internal product link is included because the correct wheel bolt must be selected from the complete wheel, hub and spacer dimensions rather than from vehicle similarity.
FAQ
What is the 1255202?It is one silver H&R wheel bolt with an M12x1.5 thread, 52 mm threaded length, fixed R12 ball seat and 17 mm hex.
Is this sold as a set?No. This listing is for one wheel bolt; H&R uses separate part numbers for packaged sets.
Does it fit every Mercedes vehicle?No. Mercedes-style describes the R12 seat geometry, not guaranteed vehicle fitment. Every listed dimension and the required thread engagement must be checked.
Can it replace a conical-seat bolt?No. A ball seat and a conical seat contact the wheel differently and must not be interchanged.
Is this the black version?No. The exact part in this listing is the silver or natural-metal version; the black bolt has a different manufacturer part number.
How is the required length determined with a spacer?Use the wheel and spacer manufacturer instructions. H&R states that a spacer normally requires a bolt longer than the original by the spacer thickness, while the approved engagement and clearances must still be verified.
What torque should be used?Use the torque specified by the vehicle, wheel or spacer manufacturer for the exact installation. No universal torque value is assigned here.
Should the installation be checked after driving?Follow the wheel and spacer manufacturer recheck procedure and inspect the installation immediately if vibration, noise or looseness is detected.
Installation Instructions
- Confirm that the wheel and hub require an M12x1.5 thread and a fixed R12 ball seat.
- Measure the original bolt and account for any approved spacer thickness to confirm that 52 mm is the required threaded length.
- Check the wheel recess and tool clearance for the 17 mm hex, and verify the required thread engagement and rear clearance.
- With the vehicle safely supported, remove one existing fastener and compare its thread, seat and usable length before installing the replacement.
- Clean and inspect the wheel, hub and threads. Do not install a damaged fastener or force mismatched threads.
- Hand-thread the bolt, seat the wheel evenly and tighten the complete wheel-fastener pattern in stages.
- Apply the torque specified by the vehicle, wheel or spacer manufacturer using a calibrated torque wrench.
- Complete the manufacturer-required torque recheck and inspect for proper seating, clearance and secure engagement.




