Husky Guardian Comfort Bed and Tailgate Mat for 2024-2026 Tacoma 6ft

Cushion cargo and knees from the bed floor through the tailgate

Husky Liners HXLTBMY24SBS is a Guardian Comfort bed-and-tailgate mat for the 2024-2026 Toyota Tacoma with the 6-foot bed. The 3/4-inch polypropylene construction is intended for spray-in-liner or bare-bed applications and includes hinge-gap coverage.

Key Features

• Bed floor and tailgate coverage
• Cushioned DriGard top layer
• Approximately 3/4-inch padded construction
• Superior skid resistance
• UV, stain, moisture, odor, and chemical resistance
• Hook-and-loop installation without drilling

Fitment

Specifications

What's Included

• One multi-piece Husky Liners HXLTBMY24SBS bed and tailgate mat
• Hinge-gap coverage section
• Adhesive-backed hook-and-loop mounting fasteners

About Husky Liners

Husky Liners builds vehicle-contoured cargo protection around precise bed and floor shapes. Guardian Comfort mats combine a cushioned DriGard surface with removable, cleanable polypropylene construction.

Related Parts

• No full sidewall liner is linked because this exact kit protects the bed floor and tailgate rather than the complete bed walls.

FAQ

It is the exact Guardian Comfort bed and tailgate mat for the long-bed Tacoma described in the fitment and specification tables above.

The included quantity is stated in the What's Included section. Unlisted companion parts are not included.

Yes. Confirm every listed year, model, dimension, mounting interface, and exclusion before ordering.

Professional installation is recommended whenever suspension work, wiring, alignment, or permanent vehicle preparation is involved.

No. A different part number can change dimensions, contents, finish, or vehicle application.

Inspect the mounting area, factory hardware, clearances, and every mating surface before beginning.

Warranty coverage follows the current manufacturer terms and requires correct installation and normal use.

Verify security, clearance, operation, and every manufacturer-required service check before normal use.

Installation Instructions

1. Confirm the 2024-2026 Tacoma, 6-foot bed, and spray-in or bare-bed surface requirement.
2. Remove cargo and clean the bed floor and tailgate, then allow all adhesive areas to dry.
3. Lay out the mat sections and verify their orientation around the wheel wells and hinge gap.
4. Position Husky Liners HXLTBMY24SBS and apply the supplied hook-and-loop fasteners without drilling.
5. Cycle the tailgate and press every attachment area firmly after final alignment.
6. Recheck the mat after the first cargo load and rinse away debris as needed.

California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.