Husky Liners 23-24 Dodge Hornet Ventvisor Low Profile (4pc) - Smoke

Low Profile Smoke Window Deflectors Built for the 2023 and 2024 Dodge Hornet

The Husky Liners 2854126 is a four-piece Low Profile Ventvisor set in dark smoke, custom-molded for the 2023 and 2024 Dodge Hornet. The Husky Liners 2854126 mounts to all four doors using 3M automotive-grade adhesive with no drilling and no tools required, leaving a clean, low-drag profile that complements the Hornet's factory appearance. The 2854126 is built from impact-resistant, UV-stabilized acrylic that resists fading, warping, and scratching through years of outdoor exposure. With the 2854126 installed, you can leave windows cracked while parked to reduce interior heat buildup without letting in rain. Made in the USA with global materials. Backed by a Husky Liners Limited Lifetime Warranty.

Why the 2854126 Works on the Dodge Hornet

Generic wind deflectors sit high on the window channel and interrupt the roofline. The Husky Liners 2854126 sits at the absolute lowest profile position available, tucking tight to the window glass for a subtle, factory-integrated look on the 2023 and 2024 Dodge Hornet. The dark smoke finish coordinates with the Hornet's character lines and factory tinted glass without drawing attention. Custom molding means each of the four Ventvisors on the 2854126 matches the precise curvature and length of its specific Hornet door window for a gap-free fit at every corner.

What's Included

• 4 x Husky Liners 2854126 Low Profile Ventvisors (driver front, passenger front, driver rear, passenger rear)
• Pre-installed 3M automotive-grade adhesive on each Ventvisor
• Alcohol prep wipes and installation instructions

Specifications

Fitment

Frequently Asked Questions

Does the Husky Liners 2854126 fit the Dodge Hornet GT and R/T trims?
Yes. The 2854126 is molded for the 2023 and 2024 Dodge Hornet body and fits all trims sharing the same door glass profile, including the GT and R/T.

Does the Husky Liners 2854126 fit the plug-in hybrid Hornet R/T Plus e-Hybrid?
Yes. The 2854126 fits the 2023 and 2024 Dodge Hornet regardless of powertrain, including the R/T Plus PHEV e-Hybrid. The window glass and door profile are shared across Hornet powertrains.

Will the 3M adhesive on the Husky Liners 2854126 damage my Hornet's window seals or paint?
The 3M adhesive on the 2854126 is applied to the Ventvisor only and bonds to the window channel and glass edge, not to paint. When installed according to Husky Liners instructions and removed with the appropriate adhesive release method, the 3M tape will not damage the window seals or surrounding paint.

Can I roll down the windows normally with the Husky Liners 2854126 installed?
Yes. The 2854126 Ventvisors are mounted at the top edge of the door window and do not interfere with the window glass as it travels up and down. You can operate all four windows normally with the 2854126 installed.

How do I install the Husky Liners 2854126?
Clean each window channel area with the included alcohol prep wipes. Peel back a small section of the 3M adhesive backing, position each Ventvisor aligned to the window sill edge, press firmly to initiate the bond, then peel the remaining backing while bearing down along the full length. Firm pressure with a microfiber cloth across the full adhesive contact area ensures a solid bond. Wait 24 to 48 hours before taking the vehicle through a car wash.

Does the Husky Liners 2854126 fade in the sun over time?
No. The 2854126 is built from UV-stabilized acrylic that resists fading and discoloration from prolonged sun exposure. The dark smoke finish will not lighten or change color under normal outdoor conditions.

Will the Husky Liners 2854126 rattle or vibrate at highway speeds?
No. The 3M automotive-grade adhesive creates a firm, rattle-free bond to the window channel. Husky Liners custom-molds the 2854126 to the specific Hornet window curvature so there are no loose sections or flex points that could cause vibration.

Does the Husky Liners 2854126 come with a warranty?
Yes. The 2854126 is backed by the Husky Liners Limited Lifetime Warranty against defects in materials and workmanship.

Install Instructions

Clean all four door window channel areas with the included rubbing alcohol prep wipes. If your Hornet has a ceramic coating, that coating must be removed from the adhesive contact zone before installation, as ceramic coatings prevent the 3M tape from bonding. Identify each of the four 2854126 Ventvisors by door position. Peel back a small section of the red adhesive backing liner on the first Ventvisor, align it to the bottom edge of the window sill, and press to get initial adhesion at both ends. Peel the remaining adhesive backing while bearing down firmly from end to end. Repeat for all four doors. Apply firm, even pressure with a clean microfiber cloth across each Ventvisor. Do not take the vehicle through an automatic car wash for 24 to 48 hours to allow the 3M adhesive to reach full cure strength.

California Residents: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.