ICON 61723C Super Duty CDCV coilover conversion kit components
ICON 61723C coilover-equipped Ford Super Duty front three-quarter view
ICON 61723C coilover-equipped Ford Super Duty rear three-quarter view
Click to zoom in
View vehicle applications

Description

Add adjustable front damping and ride height without a fabricated coilover tower

ICON Vehicle Dynamics 61723C converts the listed four-wheel-drive Ford Super Duty front suspension to serviceable 2.5 Series remote-reservoir coilovers with Compression Damping Control Valves. The bolt-in design uses the original coil-bucket location while supporting application-specific lift ranges and damping adjustment.

Key Features

  • ICON Vehicle Dynamics 61723C is matched to the verified application and configuration
  • Bolt-in conversion uses the original front coil-bucket location
  • Pair of 2.5 Series remote-reservoir coilovers with vehicle-specific valving
  • CDCV knobs provide external compression-damping adjustment
  • Ride height is adjustable within the verified engine and Tremor-package ranges
  • Cadmium-plated shock bodies use 7/8-inch shafts
  • FK rod-end bearings reduce deflection at the mounting points
  • Coilovers are rebuildable and revalveable, and ICON coil springs are guaranteed against sagging or breakage under current terms

Application details and restrictions

Years Make Model Verified Configuration and Restrictions
2023-2026 Ford F-250 Super Duty 4WD King Ranch, Lariat, Platinum, XL, or XLT; Limited verified for 2023-2024 only. See engine, Tremor, caster, ADAS, and installation notes below.
2023-2026 Ford F-350 Super Duty 4WD King Ranch, Lariat, Platinum, XL, or XLT; Limited verified for 2023-2024 only. See engine, Tremor, caster, ADAS, and installation notes below.

Specifications

Detail Value
Manufacturer Part Number 61723C
Product Type Front bolt-in coilover conversion kit
Shock Series 2.5 VS remote reservoir
Damping Adjustment Compression Damping Control Valve
Shock Construction Monotube, serviceable and revalveable
Shock Body Finish Corrosion-resistant cadmium plating
Shaft Diameter 7/8 in
Front Lift, Diesel Non-Tremor 2.5-3 in over stock
Front Lift, Diesel Tremor 1.5-2 in over stock
Front Lift, Gas Non-Tremor 3-3.5 in over stock
Front Lift, Gas Tremor 2-2.5 in over stock
Factory Wheels and Tires Compatible according to current ICON application notes
Recommended Tire 35 x 12.50 in; 37 x 12.50 in requires fender trimming and other modifications
UPC 840103431864
California Proposition 65 Warning applies; review the manufacturer warning supplied with the kit

What's Included

  • One exact ICON Vehicle Dynamics 61723C front 2.5 Series remote-reservoir coilover assemblies with CDCV adjusters
  • Bolt-in conversion brackets, reservoir mounts, spacers, and installation hardware supplied in the sealed ICON kit
  • Caster-correction parts, adjustable track bar, brake-line kit, secondary shocks, reservoir doubler kit, wheels, tires, and ADAS calibration are not included

About ICON Vehicle Dynamics

ICON Vehicle Dynamics engineers rebuildable suspension systems with vehicle-specific valving and documented application notes. The final ride height and handling depend on engine weight, Tremor equipment, supporting geometry corrections, wheel and tire clearance, alignment, and professional installation.

Related Parts

  • ICON 61111 brake-line kit is optional when the installer prefers a braided upgrade instead of carefully reforming the factory steel lines; verify the exact active product before ordering.
  • ICON 611003 reservoir doubler kit is required only when adding ICON 2.5 Series remote-reservoir secondary shocks; no unverified internal link is included.
  • Appropriate caster cams, an aftermarket radius-arm kit, or a four-link conversion is required and sold separately.

FAQ

What is the 61723C?

It is front coilover conversion kit for the listed 2023-2026 Ford F-250 and F-350 Super Duty 4WD configurations.

What application must be confirmed before ordering?

Confirm 4WD, model year, trim, engine, Tremor package, intended lift, wheel and tire clearance, caster-correction method, track-bar position, brake-line routing, passenger-side wiring-harness clearance, secondary-shock plans, and ADAS recalibration before ordering.

What is included?

The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.

Is this a universal product?

No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.

Does the listing include unrelated installation parts?

No. Only the exact component or kit identified in the included-items section is supplied.

Should existing components be inspected?

Inspect ball joints, radius arms, track bar, steering linkage, axle bushings, brake lines, wheel bearings, tires, wheels, wiring, and alignment hardware before installation.

Is professional installation recommended?

Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.

What should be checked after installation?

Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.

Installation Instructions

  1. Confirm ICON Vehicle Dynamics 61723C, the application, and every listed restriction before installation.
  2. Record ride height, secure the vehicle and axle, disconnect the battery as required, and follow the current ICON instructions for removing the factory springs, shocks, and coil-bucket centering cups.
  3. Install the supplied bolt-in conversion mounts, coilovers, reservoirs, brackets, spacers, and hardware without allowing the hoses to twist, kink, rub, or contact hot and moving parts.
  4. Correct caster with the required caster cams, radius-arm system, or four-link components and address axle centering with an adjustable track bar when needed.
  5. Verify passenger-side wiring-harness clearance, brake-line routing, reservoir clearance, wheel and tire clearance, steering travel, and suspension travel before final torque.
  6. Set initial ride height and CDCV positions within ICON's instructions, torque all hardware at the specified suspension position, align the truck, recalibrate ADAS, and recheck fasteners and clearances after the documented break-in interval.

ICON CDCV Coilover Conversion for 2023-2026 Ford F-250/F-350 4WD

ICON
ICO61723C
840103431864
Coilovers
1 Units In Stock
$ 2,674.95
$ 2,674.95

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×