-9%
Click to zoom in
SKU: 59113
Innovative 88-91 Prelude H-Series Competition Traction Bar Kit
This Competition Traction Bar Kit from Innovative bolts onto 1988-1991 Honda Prelude chassis with H-Series engine swaps to plant rear tires during hard acceleration. It channels engine power straight to the ground for quicker 60-foot times and consistent launches on drag strips or autocross. Weighing just 15 lbs drivers experience reduced wheel hop and better traction control.
Key Features
- 4130 Chromoly Steel Construction: 1-3/8 inch diameter 0.120 wall tubing handles extreme torque loads at low 15 lb weight
- Fully Adjustable Design: Threaded ends and heim joints enable precise length and angle adjustments for any suspension geometry or tire setup
- PTFE-Lined Heim Joints: Deliver smooth movement under heavy load with no binding for traction through full launch sequence
- Black Powder-Coated Finish: Protects against corrosion and track impacts for durability in wet or abrasive conditions
- Complete Bolt-On Kit: Grade 8 hardware billet aluminum brackets and instructions mount directly from rear subframe to differential
Product Notes
- Engineered for H-Series swapped Preludes verify subframe condition before install
- Torque fasteners to spec and recheck after 100 miles of use
- Arrives fully assembled ready for straightforward setup
Installation Notes
- Professional installation recommended.
- Bolt-on to OEM rear subframe and differential no welding required
- Compatible with stock axles and most aftermarket rear suspensions
This Part Fits
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1988-1990 | Honda | Prelude | 2.0 S |
| 1988-1991 | Honda | Prelude | 2.0 Si |
| 1988-1989 | Honda | Prelude | 2.0 Si 4WS |
| 1990-1991 | Honda | Prelude | Si |
| 1990-1991 | Honda | Prelude | Si 4WS |
| 1990-1991 | Honda | Prelude | Si ALB |
Why Choose Innovative?
- Race-proven on drag strips and road courses worldwide
- Hand-built with aircraft-grade materials for Honda platforms
- Limited lifetime warranty against defects
Frequently Asked Questions
-
Q: Does this fit H22 or H23 swapped 88-91 Preludes?
A: Yes fits all H-Series transmissions in 1988-1991 Prelude chassis including H22A H23A with stock or modified rear subframes -
Q: What materials and finish are used?
A: 4130 chromoly steel bars 6061-T6 aluminum brackets PTFE-lined heim joints and black powder coat for rust protection -
Q: How long is installation and what tools are needed?
A: 2-4 hours with basic hand tools jack stands and torque wrench professional help advised for first-time installers
Shipping & Handling
- Method: UPS Ground
- Availability: In stock - ships same or next business day
- Packaging: One sturdy box 42 x 8 x 8 inches
- Weight: 15 lbs
Innovative Mounts
Innovative Mounts Innovative Mounts engine and transmission mount kits serve Honda and Acura enthusiasts building Civic, Integra, RSX, TSX, Accord and CR-V platforms with B-series, K-series, D-series, H-series and F-series powertrains. Black Ops Auto Works carries 183 Innovative Mounts SKUs including polyurethane engine mount kits, transmission mounts, replacement bushings, traction bars, crossmembers and swap-specific mounting hardware with vehicle filters. What This Innovative Mounts Collection Covers Innovative Mounts products focus on Honda and Acura chassis applications, including Civic, CRX, Integra and RSX builds. The selection also includes select Jeep Wrangler, Ford, Nissan and Mitsubishi applications, all of which must be matched by exact engine and chassis details. Honda and Acura Engine Mount Kits Mount kits locate the engine and transmission for a specific chassis and swap combination. Select the exact chassis generation, engine family, transmission type and mount s...
View Innovative Mounts Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products
Traction Bars
Traction bars, traction rods and launch control hardware for trucks, muscle cars and performance builds are stocked at Black Ops Auto Works. Shop bolt on truck traction bars, adjustable bars, ladder bars, wishbone kits, front wheel drive traction bars, mounting brackets, bushings, heims, axle brackets and replacement hardware for Silverado, Sierra, F 150, Super Duty, Ram, Duramax, Power Stroke and Cummins applications. Every product is filterable by year, make, model, trim, cab, bed, engine and drivetrain so the correct mounting points and suspension configuration can be confirmed before ordering. Black Ops Auto Works carries 86 traction bar SKUs across truck, drag race, street performance and chassis support applications. What This Traction Bars Collection Covers Traction bars control axle housing rotation and wheel movement under acceleration. They help reduce wheel hop, axle wrap and unstable launches while preserving predictable suspension movement. This collection also incl...
View Traction Bars Products