Size Chart
×
SKU: HS02SW1TRG
The Invidia full titanium cat-back exhaust system, designed specifically for these models to deliver enhanced engine breathing and a refined driving experience. This 80mm piping exhaust starts right after the catalytic converter, replacing the restrictive factory setup to allow freer flow of exhaust gases. Built entirely from lightweight titanium, it provides substantial weight reduction compared to traditional stainless steel systems—dropping around 15-20 pounds off the rear of your vehicle for better handling and acceleration. Dyno testing confirms gains of up to 10-15 horsepower and similar torque improvements, particularly in the mid-to-high RPM range, while reducing turbo lag for quicker spool-up and sharper throttle response. The single rear-exit design produces a deep, aggressive tone that evolves from a subtle rumble at idle to a high-rev roar under load, without the drone common in lesser aftermarket options.
Crafted with precision welding and mandrel-bent tubing, the HS02SW1TRG ensures seamless integration and long-term reliability under track or street conditions. Its corrosion-resistant titanium construction withstands heat cycles and road debris better than alternatives, making it the direct fit solution that outperforms stock and budget exhausts in power delivery, sound quality, and overall vehicle balance. For Subaru WRX and STI owners seeking a bolt-on upgrade that transforms daily drives and weekend runs, this system stands out by combining measurable performance boosts with a premium finish that complements the car's sporty aesthetics.
Key Specifications
Piping Diameter: 80mm (mandrel-bent for smooth flow)
Exhaust Tip Diameter: 101mm (polished titanium finish)
Material: Full titanium throughout (midpipe, muffler, and tips)
Exhaust Type: Cat-back, single rear exit, non-resonated racing design
Sound Profile: Deep and throaty, with increased volume over factory (no cabin drone)
Weight Savings: Approximately 15-20 lbs lighter than comparable stainless steel cat-backs
Vehicle Fitment
Years: 2002-2007
Make: Subaru
Models:
Notes: Direct bolt-on installation; no modifications required. Compatible with stock or aftermarket catalytic converters. Not for vehicles with active exhaust valves.
What's Included in the Purchase
Shipping Information
Package Weight: 25 lbs
Box Dimensions: 59 in (L) x 18 in (W) x 12 in (H)
This Invidia HS02SW1TRG exhaust is the engineered choice for 2002-2007 Subaru WRX and STI enthusiasts who demand real-world gains in power, efficiency, and enjoyment from every drive. Install it to feel the difference in responsiveness and hear the signature Subaru growl!
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2007 | Subaru | Impreza | WRX |
| 2006-2007 | Subaru | Impreza | WRX Limited |
| 2004-2007 | Subaru | Impreza | WRX STI |
| 2007 | Subaru | Impreza | WRX STI Limited |
| 2006-2007 | Subaru | Impreza | WRX TR |
A catback exhaust system replaces everything from the catalytic converter back, covering the mid pipe, muffler, and tailpipe section in one bolt on upgrade. This collection covers catback systems for trucks, Jeeps, muscle cars, imports, and performance SUVs, giving you a straightforward way to improve sound, exhaust flow, and rear end styling without touching the factory catalytic converters or front pipe. Catback systems are available in stainless steel and titanium construction, with dual rear exit, single exit, and quad tip configurations, and a range of sound levels from mild touring tone to aggressive track character. Whether you want a deeper daily driver sound or a full track ready exhaust note, you will find a matched system for your platform here. What This Category Covers This collection includes complete catback exhaust systems, cat-back kits, dual rear exit systems, axle back adjacent catback upgrades, stainless steel and titanium exhaust systems, and street, tourin...
View Catback Products
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products
Invidia for Subaru WRX, STI, BRZ, Honda Civic and Type R, Mitsubishi EVO, Nissan 350Z, Toyota GR Corolla, Supra, GT-R, and Volkswagen GTI builds are stocked at Black Ops Auto Works. Shop N1, Q300, R400, Gemini, cat-back, axle-back, front pipe, downpipe, J-pipe, and mid-pipe exhaust components. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 221 Invidia SKUs across vehicle-specific performance categories. About Invidia Invidia focuses on vehicle-specific stainless steel and titanium exhaust systems for Japanese and import sport platforms. Its catalog covers refined street sound and aggressive track-inspired options, with proven applications for turbocharged Subaru, Honda, Mitsubishi, Nissan, Toyota, and Volkswagen vehicles. Vehicle-Specific Selection Use the application details on each listing to narrow the selection to the exact platform. Product availability and specifications ...
View Invidia Products