JXB C7002A0 solenoid delete plug kit on white background
Click to zoom in
View vehicle applications

Description

Control the connection without masking worn surrounding parts

JXB Performance C7002A0 is the manufacturer-listed solenoid delete plug kit for the applications and requirements below. Select the exact option represented by the variant SKU and confirm every chassis, drivetrain, arm, transmission, or mating-part restriction before ordering.

Key Features

  • C7002A0 is the exact manufacturer part family shown for this application
  • YOU CANNOT CODE THESE OUT VIA VCDS OR SIMILAR. EVEN IF YOU HAVE COD DISABLED IN YOUR TUNE, THAT DOES NOT MEAN YOU’RE GOOD TO GO
  • These must be coded out in your tune. OTS tunes do not have this done. Most tuners do not know how to do it. We recommend this service to properly code them out in your tune .
  • Careful not to drop them; they fall into some weird places and are not magnetic…
  • Link to an aluminum version of the screws if you want to go lighter: https://www.mcmaster.com/98511A745/
  • Link to the steel version of the screws if you just lose some: https://www.mcmaster.com/90128A234/

Fitment

Application requirements

Fits the Audi 4.0T found in the C7 S6/S7/RS6/RS7 and D4 A8/A8L/S8.

Manufacturer Application Requirements and Exclusions
Fits the Audi 4.0T found in the C7 S6/S7/RS6/RS7 and D4 A8/A8L/S8. Match the exact vehicle, drivetrain, transmission, arm, or JXB component interface

C7002A0 applies only to the listed vehicles or JXB component interface. The Fitment table and selected variant must both match.

Specifications

Detail Value
Manufacturer Part Family C7002A0
Product Type solenoid delete plug kit
C7002A0 Standard configuration

What's Included

  • One JXB C7002A0 product in the selected configuration
  • Only the components represented by the selected manufacturer variant and current JXB product page
  • Unlisted arms, bearings, tools, fluids, vehicle hardware, and installation labor are not included

About JXB Performance

Manufacturer product information

JXB Performance develops serviceable drivetrain, suspension, and shift-control components around exact chassis interfaces. Its application-specific parts are intended to replace compliance or strengthen a known connection without changing the surrounding vehicle geometry beyond the documented design.

Related Parts

  • Use only replacement bearings, sleeves, fasteners, and mating components explicitly approved by JXB for C7002A0
  • Do not substitute a visually similar part from another chassis or arm configuration

FAQ

What is the C7002A0?

It is the JXB product family described in the Specifications table for the listed application or component interface.

How do I confirm fitment?

Match the vehicle chassis, model year, drivetrain, transmission, arm type, and every restriction shown in the Fitment table.

Does the selected option matter?

Yes. Variant SKUs may represent different arms, bearing materials, hardware, or companion components and are not interchangeable unless JXB states otherwise.

What is included?

The order includes only the components represented by the selected JXB variant. Unlisted factory parts and tools are not included.

Can this be installed with damaged surrounding parts?

No. Inspect all mating parts and replace worn, bent, loose, or damaged components before installation.

Is professional installation recommended?

Yes when the work involves suspension geometry, drivetrain support, hydraulic systems, exhaust electronics, pressing operations, or vehicle alignment.

Will installation require calibration or alignment?

That depends on the product. Suspension work may require alignment, while electronic or hydraulic components may require functional checks or bleeding.

What should be checked before driving?

Verify correct orientation, fastener torque, clearance, free movement, connector or hydraulic security, and the absence of abnormal noise or warning messages.

Installation Instructions

  1. Confirm the exact vehicle or JXB component interface and selected SKU before opening the package.
  2. Review the current JXB instructions and inventory every supplied component.
  3. Inspect the surrounding factory parts and correct wear or damage before installation.
  4. Install the component in the documented orientation using the specified tools, hardware, and torque procedure.
  5. Complete any required alignment, bleeding, calibration, clearance, or functional check before road use.
  6. Reinspect fasteners and operation after the initial controlled test.

JXB Audi 4.0T Cylinder on Demand (Cylinder Deactivation) Solenoid Delete Plugs

C7002A0
Engine Electronics
Same Day or Next Business Day
$ 159.99
$ 159.99

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×