View vehicle applications
Fitment notes and restrictions
Description
Control the connection without masking worn surrounding parts
JXB Performance B8010A0 is the manufacturer-listed rear spring perch for the applications and requirements below. Select the exact option represented by the variant SKU and confirm every chassis, drivetrain, arm, transmission, or mating-part restriction before ordering.
Key Features
- B8010A0 is the exact manufacturer part family shown for this application
- As with all of our products, weight is always a concern. We’ve designed this specifically to keep the weight as low as possible. Weighing in at just 7.6 oz, each, they gain no weight over the OEM parts.
Fitment
| Manufacturer Application | Requirements and Exclusions |
|---|---|
| Audi B8/8.5 Billet Rear Spring Perches | Match the exact vehicle, drivetrain, transmission, arm, or JXB component interface |
B8010A0 applies only to the listed vehicles or JXB component interface. The Fitment table and selected variant must both match.
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Family | B8010A0 |
| Product Type | rear spring perch |
| B8010A0 | Standard configuration |
What's Included
- One JXB B8010A0 product in the selected configuration
- Only the components represented by the selected manufacturer variant and current JXB product page
- Unlisted arms, bearings, tools, fluids, vehicle hardware, and installation labor are not included
About JXB Performance
Manufacturer product information
JXB Performance develops serviceable drivetrain, suspension, and shift-control components around exact chassis interfaces. Its application-specific parts are intended to replace compliance or strengthen a known connection without changing the surrounding vehicle geometry beyond the documented design.
Related Parts
- Use only replacement bearings, sleeves, fasteners, and mating components explicitly approved by JXB for B8010A0
- Do not substitute a visually similar part from another chassis or arm configuration
FAQ
What is the B8010A0?It is the JXB product family described in the Specifications table for the listed application or component interface.
How do I confirm fitment?Match the vehicle chassis, model year, drivetrain, transmission, arm type, and every restriction shown in the Fitment table.
Does the selected option matter?Yes. Variant SKUs may represent different arms, bearing materials, hardware, or companion components and are not interchangeable unless JXB states otherwise.
What is included?The order includes only the components represented by the selected JXB variant. Unlisted factory parts and tools are not included.
Can this be installed with damaged surrounding parts?No. Inspect all mating parts and replace worn, bent, loose, or damaged components before installation.
Is professional installation recommended?Yes when the work involves suspension geometry, drivetrain support, hydraulic systems, exhaust electronics, pressing operations, or vehicle alignment.
Will installation require calibration or alignment?That depends on the product. Suspension work may require alignment, while electronic or hydraulic components may require functional checks or bleeding.
What should be checked before driving?Verify correct orientation, fastener torque, clearance, free movement, connector or hydraulic security, and the absence of abnormal noise or warning messages.
Installation Instructions
- Confirm the exact vehicle or JXB component interface and selected SKU before opening the package.
- Review the current JXB instructions and inventory every supplied component.
- Inspect the surrounding factory parts and correct wear or damage before installation.
- Install the component in the documented orientation using the specified tools, hardware, and torque procedure.
- Complete any required alignment, bleeding, calibration, clearance, or functional check before road use.
- Reinspect fasteners and operation after the initial controlled test.




