JXB D3001A0 driveshaft center support bearing carrier on white background
Click to zoom in
View vehicle applications

Description

Keep the driveshaft centered when torque loads rise

JXB Performance D3001A0 replaces the flexible factory center-support carrier on the verified applications below while retaining the original bearing. The split carrier limits bearing sag and off-center movement to improve driveline alignment and response without requiring driveshaft removal.

Key Features

  • D3001A0 uses a rigid split-carrier design that clamps around the original center support bearing
  • Helps reduce driveline movement during launches, shifts, and rapid throttle changes
  • Replaceable Street and Track damper bushings support different NVH priorities
  • Street bushings provide greater noise and vibration isolation
  • Track bushings are approximately twice as firm as Street bushings
  • The original bearing remains serviceable and must be inspected before installation

Fitment

Application requirements

D3 A8/A8L/S8

Manufacturer Application Requirements and Exclusions
D3 A8/A8L/S8 Match the exact chassis, drivetrain and exclusion stated by JXB

D3001A0 fitment is limited to the manufacturer-listed applications and restrictions in this table. Confirm the vehicle, drivetrain configuration, and original driveshaft before ordering.

Specifications

Detail Value
Manufacturer Part Family D3001A0
Street (Soft, Quieter) D3001A0-S
Track (Hard, Louder) D3001A0-T
Give me Both D3001A0-B
Bearing Original center support bearing retained
Installation Method Two-piece carrier clamps around the bearing after removal of the original carrier
Bushing Choices Street, Track, or both when offered by the selected variant

What's Included

  • One JXB D3001A0 carrier assembly in the selected configuration
  • The Street, Track, or combined bushing set represented by the selected variant
  • Application-specific carrier hardware supplied with the assembly
  • A replacement bearing, driveshaft, cutting tool, exhaust hardware, heat shields, and installation labor are not included

About JXB Performance

Manufacturer product information

JXB Performance develops serviceable drivetrain and suspension supports that replace flexible factory structures while retaining application-specific geometry. Its replaceable damper-bushing system separates driveline control from the vibration isolation needed in a street vehicle.

Related Parts

  • Use only replacement bushings and hardware explicitly listed by JXB for D3001A0
  • Inspect the original center support bearing and driveline joints before installation
  • Do not substitute a carrier from a related platform or a different driveshaft configuration

FAQ

What is the D3001A0?

It is a split driveshaft center support bearing carrier for the verified applications shown in the Fitment table.

Is a new center support bearing included?

No. The original bearing is retained and must be inspected for serviceability before installation.

Must the driveshaft be removed?

No. JXB states that the split carrier clamps around the original bearing after the factory carrier is cut away.

How do Street and Track bushings differ?

Street bushings prioritize noise and vibration isolation. Track bushings are approximately twice as firm and may transmit more NVH.

What does the combined bushing option include?

When offered, it includes complete Street and Track bushing sets so the installed stiffness can be changed or mixed.

Can this correct a damaged bearing?

No. A noisy, loose, seized, or otherwise damaged bearing must be serviced before the carrier is installed.

What access work is normally required?

Access may require removal or lowering of braces, splash shields, exhaust sections, and heat shields. The exact procedure varies by vehicle.

What should be checked after installation?

Confirm fastener torque, driveshaft alignment, heat-shield and exhaust clearance, free rotation, and the absence of abnormal vibration.

Installation Instructions

  1. Confirm the vehicle, fitment restrictions, and original driveshaft configuration before opening the package.
  2. Inspect the original center support bearing and driveline joints; replace damaged components before installing a carrier.
  3. Support the vehicle and driveshaft safely, then remove only the braces, exhaust sections, and heat shields required for access.
  4. Cut away the original carrier without contacting the bearing or driveshaft.
  5. Remove the original support rubber as directed while leaving the molded base layer intact on the bearing.
  6. Clamp the new split carrier around the bearing with the selected bushings and supplied hardware.
  7. Torque all fasteners to current JXB and vehicle specifications, then reinstall every removed component.
  8. Verify alignment, free driveshaft rotation, clearance, and the absence of vibration during a controlled road test.

JXB Audi D3 A8/S8 Driveshaft Center Support Bearing Carrier

D3001A0-S
Driveshaft Center Support Bearing Carriers
Same Day or Next Business Day
$ 299.99
$ 299.99

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×