JXB DIF07A0 differential component on white background
Click to zoom in
View vehicle applications

Description

Control the connection without masking worn surrounding parts

JXB Performance DIF07A0 is the manufacturer-listed differential component for the applications and requirements below. Select the exact option represented by the variant SKU and confirm every chassis, drivetrain, arm, transmission, or mating-part restriction before ordering.

Key Features

  • DIF07A0 is the exact manufacturer part family shown for this application
  • Our rebuild kit is offered in 2 ways:
  • Complete Rebuild Send in your differential to us, and we’ll do a complete tear-down and rebuild, replacing all bearings and seals. Full list below.
  • Send in your differential to us, and we’ll do a complete tear-down and rebuild, replacing all bearings and seals. Full list below.
  • Rebuild without Pinion Shaft Same as above, but without the pinion shaft bearings or oil seal.
  • Rebuild without Pinion Shaft

Fitment

Manufacturer Application Requirements and Exclusions
Differential Rebuild Kit for Audi B8/C7/D4 Sport Differential Match the exact vehicle, drivetrain, transmission, arm, or JXB component interface

DIF07A0 applies only to the listed vehicles or JXB component interface. The Fitment table and selected variant must both match.

Specifications

Detail Value
Manufacturer Part Family DIF07A0
Product Type differential component
DIF07A0-A Include Pinion Shaft Rebuild?: Yes, Include Pinion Shaft Rebuild (+$500)
DIF07A1-A Include Pinion Shaft Rebuild?: No, Just the Pump, Axle Seals, and Side Bearings

What's Included

  • One JXB DIF07A0 product in the selected configuration
  • Only the components represented by the selected manufacturer variant and current JXB product page
  • Unlisted arms, bearings, tools, fluids, vehicle hardware, and installation labor are not included

About JXB Performance

Manufacturer product information

JXB Performance develops serviceable drivetrain, suspension, and shift-control components around exact chassis interfaces. Its application-specific parts are intended to replace compliance or strengthen a known connection without changing the surrounding vehicle geometry beyond the documented design.

Related Parts

  • Use only replacement bearings, sleeves, fasteners, and mating components explicitly approved by JXB for DIF07A0
  • Do not substitute a visually similar part from another chassis or arm configuration

FAQ

What is the DIF07A0?

It is the JXB product family described in the Specifications table for the listed application or component interface.

How do I confirm fitment?

Match the vehicle chassis, model year, drivetrain, transmission, arm type, and every restriction shown in the Fitment table.

Does the selected option matter?

Yes. Variant SKUs may represent different arms, bearing materials, hardware, or companion components and are not interchangeable unless JXB states otherwise.

What is included?

The order includes only the components represented by the selected JXB variant. Unlisted factory parts and tools are not included.

Can this be installed with damaged surrounding parts?

No. Inspect all mating parts and replace worn, bent, loose, or damaged components before installation.

Is professional installation recommended?

Yes when the work involves suspension geometry, drivetrain support, hydraulic systems, exhaust electronics, pressing operations, or vehicle alignment.

Will installation require calibration or alignment?

That depends on the product. Suspension work may require alignment, while electronic or hydraulic components may require functional checks or bleeding.

What should be checked before driving?

Verify correct orientation, fastener torque, clearance, free movement, connector or hydraulic security, and the absence of abnormal noise or warning messages.

Installation Instructions

  1. Confirm the exact vehicle or JXB component interface and selected SKU before opening the package.
  2. Review the current JXB instructions and inventory every supplied component.
  3. Inspect the surrounding factory parts and correct wear or damage before installation.
  4. Install the component in the documented orientation using the specified tools, hardware, and torque procedure.
  5. Complete any required alignment, bleeding, calibration, clearance, or functional check before road use.
  6. Reinspect fasteners and operation after the initial controlled test.

JXB Differential Rebuild Kit for Audi B8/C7/D4 Sport Differential

DIF07A0-A
Differential Parts
Same Day or Next Business Day
$ 1,599.99
$ 1,599.99

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×