JXB 4L001A0 Audi Q7 driveshaft center support bearing carrier on white background
Click to zoom in
View vehicle applications

Description

Hold the Q7 driveshaft on center under load

JXB Performance 4L001A0 replaces the flexible factory center-support carrier on a supported 2005-2015 Audi Q7 while retaining the original bearing. Its split housing installs around the bearing after the original carrier is removed, helping maintain driveshaft alignment and reduce driveline movement during acceleration, shifting, and load changes.

Key Features

  • Rigid split carrier limits center-bearing sag and off-center movement
  • Retains the serviceable original center support bearing
  • Installs without removing or disassembling the driveshaft
  • Replaceable Street and Track damper bushings support different NVH priorities
  • Street bushings provide greater noise and vibration isolation
  • Track bushings are approximately twice as firm as Street bushings

Fitment

Application requirements

4L Q7 (2005-2015) Except with driveshafts 7L8 521 102 G, 7L8 521 102 H, 7L8 521 102 K, and 7L8 521 102 L There are three driveshafts with a smaller diameter bearing that does not work with this carrier. Part number 7L8 521 102 H, 7L8 521 102 K, and 7L8 521 102 L, typically found on early TDI models. Audi Q7’s with these part numbers will need our 4L002A0 .

Years Make Model Requirements and Exclusions
2005-2015 Audi Q7 (4L) Fits supported driveshafts except 7L8 521 102 G, 7L8 521 102 H, 7L8 521 102 K, and 7L8 521 102 L.

Inspect the driveshaft identification before ordering. Q7 models using one of the four excluded driveshaft numbers have a smaller-diameter bearing and require JXB carrier family 4L002A0 instead.

Specifications

Detail Value
Street Assembly 4L001A0-S
Track Assembly 4L001A0-T
Street and Track Assembly 4L001A0-B
Vehicle Platform Audi Q7 4L
Bearing Original center support bearing retained
Installation Method Split carrier clamps around the bearing after removal of the original carrier
Spare Bushings Street BSH04A0; Track BSH04A1
Spare Hardware SHS01A0

What's Included

  • One JXB 4L001A0 split carrier assembly
  • The Street, Track, or both damper-bushing sets selected with the variant
  • Application-specific carrier hardware supplied by JXB
  • A replacement bearing, driveshaft, cutting tool, exhaust hardware, heat shields, and installation labor are not included

About JXB Performance

Manufacturer product information

JXB Performance develops serviceable drivetrain supports that replace flexible, non-serviceable carrier structures while retaining application-specific bearing geometry. Its replaceable damper-bushing system separates driveshaft control from the vibration isolation needed in a street vehicle.

Related Parts

  • Use 4L002A0 only for the excluded smaller-bearing driveshaft numbers listed in the Fitment section.
  • BSH04A0 and BSH04A1 are replacement Street and Track bushing sets.
  • SHS01A0 is the matching spare hardware set.

FAQ

What is the 4L001A0?

It is a split driveshaft center support bearing carrier for supported 2005-2015 Audi Q7 4L applications that do not use an excluded smaller-bearing driveshaft.

Does this fit every 4L Audi Q7?

No. Check the driveshaft identification and exclude 7L8 521 102 G, H, K, and L before ordering.

What should be used with an excluded driveshaft?

JXB directs those smaller-bearing applications to carrier family 4L002A0.

Is a new center support bearing included?

No. The original bearing is retained and must be inspected for serviceability before installation.

Must the driveshaft be removed?

No. JXB states that the split carrier clamps around the original bearing after the factory carrier is cut away.

How do Street and Track bushings differ?

Street bushings prioritize noise and vibration isolation. Track bushings are approximately twice as firm and may transmit more NVH.

What does the Both option include?

It includes one carrier with complete Street and Track bushing sets so the installed stiffness can be changed or mixed.

What must be inspected after installation?

Confirm bearing condition, carrier fastener torque, driveshaft alignment, heat-shield and exhaust clearance, free rotation, and the absence of abnormal vibration.

Installation Instructions

  1. Confirm the vehicle, model years, driveshaft number, and bearing diameter before opening the package.
  2. Inspect the original center support bearing and driveline joints; replace damaged components before installing a carrier.
  3. Support the vehicle and driveshaft safely, then remove only the braces, exhaust sections, and heat shields required for access.
  4. Cut away the original carrier without contacting the bearing or driveshaft.
  5. Remove the original support rubber as directed while leaving the molded base layer intact on the bearing.
  6. Clamp the new split carrier around the bearing with the selected bushings and supplied hardware.
  7. Torque all fasteners to current JXB and vehicle specifications, then reinstall every removed shield, brace, and exhaust component.
  8. Verify alignment, free driveshaft rotation, clearance, and the absence of vibration during a controlled road test.

JXB Driveshaft Center Support Bearing Carrier for 2005-2015 Audi Q7

4L001A0-S
Driveshaft Center Support Bearing Carriers
Same Day or Next Business Day
$ 299.99
$ 299.99

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×