K&N 14-18 Jeep Cherokee 3.2L V6 High Flow Performance Intake Kit - K&N Engineering KNN77-1569KS
K&N 14-18 Jeep Cherokee 3.2L V6 High Flow Performance Intake Kit - K&N Engineering KNN77-1569KS
K&N 14-18 Jeep Cherokee 3.2L V6 High Flow Performance Intake Kit - K&N Engineering KNN77-1569KS
K&N 14-18 Jeep Cherokee 3.2L V6 High Flow Performance Intake Kit - K&N Engineering KNN77-1569KS
K&N 14-18 Jeep Cherokee 3.2L V6 High Flow Performance Intake Kit - K&N Engineering KNN77-1569KS
K&N 14-18 Jeep Cherokee 3.2L V6 High Flow Performance Intake Kit - K&N Engineering KNN77-1569KS
Click to zoom in
View vehicle applications

Description

The K&N 77-1569KS is a complete cold air intake system engineered for the 2014-2018 Jeep Cherokee 3.2L V6 Pentastar engine. On a stock 2014 Jeep Cherokee 3.2L, the 77-1569KS delivered an independently measured gain of 8.26 horsepower and 4.58 lb-ft of torque on the dynamometer. The kit replaces the restrictive factory airbox and intake tube with a silver powder-coated mandrel-bent aluminum tube paired with an oversized open-element K&N reusable high-flow air filter. Installation is a bolt-on, no-cut process completed with basic hand tools in 90 minutes or less. K&N backs the 77-1569KS with its Million Mile Limited Warranty, and the washable oiled cotton filter only needs service every 100,000 miles under normal highway driving conditions. CARB EO D-269-58 makes the 77-1569KS 50-state legal for sale and use.

Key Features

  • Dyno-tested gain: +8.26 HP and +4.58 lb-ft torque on a stock 2014 Jeep Cherokee 3.2L V6.
  • Filter service interval: every 100,000 miles under normal highway driving conditions.
  • Mandrel-bent aluminum intake tube, silver powder-coat finish for underhood durability.
  • Oversized open-element oiled cotton K&N High-Flow Air Filter (replacement filter: RF-1048).
  • No cutting, no drilling, no fabrication required: direct bolt-on fit to factory mounting points.
  • K&N 77-1569KS mandrel-bent aluminum intake tube (silver powder coat).

Fitment

Years Make Model Application
2014-2018 Jeep Cherokee 75th Anniversary, Latitude, Limited, Overland, Sport, Trailhawk

Specifications

Brand K&N Engineering
Manufacturer Part Number 77-1569KS
Product Type Cold Air Intakes
Fitment Type Vehicle Specific
Condition New

What's Included

One new K&N cold air intakes identified by manufacturer part number 77-1569KS. Hardware, adapters, clamps, hoses, filters, and service supplies are included only when stated for this exact product.

About K&N Engineering

K&N develops reusable air filtration, intake, oil filtration, fuel filtration, and related performance products for vehicle-specific and dimensional applications.

Related K&N Engineering Products

Frequently Asked Questions

How do I confirm K&N 77-1569KS fits my vehicle?
Match the year, make, and model in the fitment table, then confirm the engine, factory housing, sensor layout, emissions notes, and any application restrictions stated for this exact part.

Does K&N 77-1569KS require tuning or emissions verification?
Requirements vary by vehicle and intake configuration. Check the current K&N application and emissions notes, and complete any required calibration before full-load operation.

What should be checked after installing K&N 77-1569KS?
Verify seals, clamps, fasteners, hoses, sensors, wiring, and surrounding clearance as applicable. Check for leaks or contact, then follow the manufacturer service and reinspection schedule.

Installation Instructions

  • Disconnect the negative battery terminal before beginning installation to prevent accidental MAF sensor damage.
  • Loosen and remove the factory air intake duct clamp at the throttle body using a flathead screwdriver or 8mm socket.
  • Disconnect the MAF sensor electrical connector from the factory intake tube.
  • Remove the factory airbox lid, then lift out the stock air filter and airbox base. Disconnect any breather hoses attached to the airbox and retain for reconnection.
  • Remove the factory intake tube. Set aside all factory hardware in case reinstallation is needed.
  • Transfer the MAF sensor from the factory tube into the K&N 77-1569KS aluminum tube. Use the included hardware and tighten securely but do not over-torque.

K&N 14-18 Jeep Cherokee 3.2L V6 High Flow Performance Intake Kit

KNN77-1569KS
024844358721
Cold Air Intakes
12 Units In Stock
$ 419.99
$ 419.99

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×