Click to zoom in
Bolt-On Aluminum Performance for Your 2009-2013 Silverado V8
The K&N KNN70-3070 NextGen Aluminum Cold Air Intake is engineered for the Chevrolet Silverado 1500 equipped with the 4.8L, 5.3L, or 6.2L V8 engine. An American-made 6063 aluminum intake tube feeds colder, denser air to the engine while boosting measured airflow up to 23% over the stock plastic intake system. K&N's dyno testing recorded gains of up to 15.3 horsepower and 13.3 lb-ft of torque without any tune or ECU modification required.
Key Features
- KNN70-3070 increases airflow up to 23% over factory intake on 2009-2013 Silverado V8
- Dyno-tested gains of up to 15.3 HP and 13.3 lb-ft of torque, no tune required
- American-made 6063 aluminum tube resists heat and flex better than factory plastic
- Includes washable, reusable K&N High-Flow Lifetime Air Filter with oiled cotton media
- NextGen aluminum air box protects intake charge from engine bay heat
- Installs in under 60 minutes using basic hand tools
- Serviceable up to 100,000 miles under normal highway conditions
- Compatible with 4.8L, 5.3L, and 6.2L V8 configurations
- Dyno-tested; check CARB status for California compliance
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2009-2013 | Chevrolet | Silverado 1500 | LS |
| 2009-2013 | Chevrolet | Silverado 1500 | LT |
| 2009-2013 | Chevrolet | Silverado 1500 | LTZ |
| 2009-2013 | Chevrolet | Silverado 1500 | WT |
Specifications
| Detail | Value |
|---|---|
| Part Number | KNN70-3070 |
| Brand | K&N Engineering |
| Application | 2009-2013 Chevrolet Silverado 1500 V8 4.8/5.3/6.2L |
| Airflow Increase | Up to 23% |
| Horsepower Gain | Up to 15.3 HP |
| Torque Gain | Up to 13.3 lb-ft |
| Tube Material | 6063 Aluminum |
| Filter Media | Oiled Cotton Gauze (Washable/Reusable) |
| Filter Service Interval | Up to 100,000 miles |
| Tune Required | No |
| UPC | 024844468994 |
What's Included
- K&N KNN70-3070 aluminum intake tube
- K&N High-Flow Lifetime Air Filter (oiled, reusable)
- NextGen aluminum air box with heat shield
- All mounting hardware and factory sensor adapters
- Installation instructions
About K&N Engineering
Founded in 1969 in Riverside, California, K&N Engineering has built a reputation for washable, reusable performance air filters and intake systems used in racing and on the street for over 55 years. Every K&N intake ships with a Million Mile Limited Warranty on the filter element.
Frequently Asked Questions
Does the KNN70-3070 require a tune on the 2009-2013 Silverado 1500?No. The KNN70-3070 works with the factory ECU and all OEM sensors. No tune or recalibration is needed after installation.
Which engine sizes does the KNN70-3070 fit on the Silverado 1500?The KNN70-3070 fits the 2009-2013 Chevrolet Silverado 1500 equipped with the 4.8L, 5.3L, or 6.2L V8 gasoline engine.
How much horsepower does the KNN70-3070 add to my Silverado?K&N dyno testing on the 2009-2013 Chevrolet Silverado 1500 recorded gains of up to 15.3 horsepower and 13.3 lb-ft of torque with the KNN70-3070 installed.
Is the KNN70-3070 compatible with the Silverado 1500 with a flex-fuel engine?Yes, the KNN70-3070 is compatible with both gasoline and flex-fuel (E85) variants of the 4.8L, 5.3L, and 6.2L V8 in the 2009-2013 Silverado 1500.
How often does the K&N filter in the KNN70-3070 need to be cleaned?Under normal highway driving conditions, K&N recommends cleaning and re-oiling the filter every 75,000 to 100,000 miles. Inspect more frequently if operating in dusty or off-road environments.
Will the KNN70-3070 cause a check engine light on my Silverado?When installed correctly with all sensor connectors properly seated, the KNN70-3070 should not trigger a check engine light. The kit is designed for full OEM sensor compatibility.
Does the KNN70-3070 work with the Silverado 1500 Crew Cab and Extended Cab?Yes. The KNN70-3070 is compatible with all cab configurations of the 2009-2013 Chevrolet Silverado 1500 with the supported V8 engines.
How long does it take to install the KNN70-3070 on the Silverado?Most installations are completed in under 60 minutes using basic hand tools. No cutting, drilling, or permanent modifications to the vehicle are required.
Installation Instructions
- Disconnect the negative battery cable before starting installation
- Remove the factory air box cover and loosen the intake boot clamp at the throttle body
- Unplug all sensor connectors from the stock intake assembly
- Remove the factory air box base and plastic intake tube
- Route the KNN70-3070 aluminum tube into position per the included instructions and reconnect all sensors
- Mount the NextGen aluminum air box and secure with provided fasteners
- Install the K&N filter onto the intake tube end and tighten the clamp
- Reconnect the battery and start the vehicle to confirm no fault codes or air leaks
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Air Intake Systems
Air intake systems for Hellcat, Trackhawk, TRX, HEMI, and import performance platforms are stocked at Black Ops Auto Works. Shop cold air intakes, short ram intakes, air boxes, intake elbows, mass air flow sensors, scoops, snorkels, and silicone couplers for street cars, trucks, Jeeps, and supercharged Mopar builds. Every intake system is filterable by vehicle platform, engine, and intake style so the correct part ships the first time. Black Ops Auto Works carries 4,427 air intake SKUs across cold air intakes, short ram intakes, and supporting components. What This Category Covers An air intake system pulls outside air into the engine and filters it before combustion. Upgrading the factory intake with a cold air intake, short ram intake, or carbon fiber system can improve airflow, throttle response, induction sound, and horsepower potential on compatible applications. Cold Air Intakes vs Short Ram Intakes Cold air intakes route the filter away from engine bay heat for cooler, de...
View Air Intake Systems Products
Chevrolet Silverado Parts & Accessories
Chevrolet Silverado parts and accessories for the 1500, 2500 HD, and 3500 HD are stocked at Black Ops Auto Works. Shop cold air intakes, cat-back and axle-back exhaust systems, leveling and lift kits, lowering kits, brake pads, rotors and big brake kits, tonneau covers, grille guards, running boards, floor liners, oil catch cans, fuel injectors, LED lighting, and cast and forged wheels for Silverado 1500, 2500 HD, 3500 HD, Trail Boss, RST, LTZ, High Country, ZR2, and Duramax Diesel trims. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 2,566 Chevrolet Silverado SKUs across performance, appearance, towing, and off-road categories. What This Collection Covers The Chevrolet Silverado lineup spans the light-duty 1500 and the heavy-duty 2500 HD and 3500 HD, built on the GM T1XX and related platforms. This collection combines OE-style replacement parts with performance and appearance ...
View Chevrolet Silverado Parts & Accessories Products
Cold Air Intakes
Shop cold air intakes, short ram intakes, closed-airbox intake systems, replacement air filters, intake tubes, and MAF housings from K&N, AEM, aFe Power, Airaid, S&B Filters, Injen, Roush, Volant, Corsa, Mishimoto, HPS Performance, Cobb Tuning, JLT, Vararam, Steeda, and other performance intake brands. Find full open-element cold air intakes, sealed-airbox systems, dry and oiled air filters, replacement drop-in filter panels, MAF sensor housings, and complete intake tube kits. Cold air intakes for domestic muscle, sport-compact tuners, diesel trucks, off-road 4x4, Euro performance, and modern sport SUVs Mustang, Camaro, Challenger, Charger, F-150, Silverado, Ram, Tundra, Tacoma, 4Runner, Wrangler, Bronco, Cummins, Duramax, Power Stroke, WRX/STi, Civic Type R, GR86, Supra, GR Corolla, BMW M2/M3/M4, Golf R, and hundreds of additional platforms. Filter by vehicle, intake style (open element, closed airbox, short ram, tube kit), filter media (oiled cotton, dry synthetic), tun...
View Cold Air Intakes Products
K&N Engineering
K&N Engineering filters and intakes for Jeep, RAM, Dodge, Chevy, Ford, Toyota, BMW, and Cadillac platforms are stocked at Black Ops Auto Works. Shop cold air intakes, Aircharger and NextGen intake systems, reusable panel filters, drop-in filters, universal clamp-on filters, oil filters, cabin filters, fuel filters, and filter cleaning kits for HEMI, Cummins diesel, EcoBoost, and LS/LT engine builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 1,927 K&N Engineering SKUs across intake, filtration, and maintenance categories. What This Brand Covers K&N Engineering built its reputation on reusable, high flow air filtration. This collection spans complete cold air intake systems, direct fit replacement filters, universal clamp-on filters for custom builds, and maintenance items like oil filters, fuel filters, and cabin filters. Cold Air Intakes and Intake Systems K&am...
View K&N Engineering Products