View vehicle applications
Fitment notes and restrictions
Description
The KONI STR.T component identified by manufacturer part number 8250-1064 is supplied for the exact configuration described as KONI STRT Rear Shock Absorber / 2019-2026 Toyota Corolla (PN 8250-1064). Match the complete part number, position, suspension design, and every application requirement before ordering.
Key Features
- Finished in KONI's signature orange, the 8250-1064 uses a twin-tube, low-pressure gas design with fixed valving that complements stock ride height or a mild lowering spring setup.
- Yes, this shock is tuned to complement stock ride height springs as well as mild performance lowering springs.
- No, it uses OE-quality mounting points designed for a direct bolt-on fit, so no cutting, fabrication, or alignment correction is needed.
- It uses a twin-tube, low-pressure gas-charged steel body finished in KONI's signature orange paint.
- Repeat on the opposite side, then check ride height and road test before returning to normal use.
- Restore Confident Handling To Your Corolla With A KONI STR.T Rear Shock The KONI STR.T rear shock, part number 8250-1064, is a direct bolt-on replacement built specifically for the 2019 and newer Toyota Corolla.
Fitment
| Years | Make | Model |
|---|---|---|
| 2019-2026 | Toyota | Corolla |
Specifications
| Brand | KONI |
|---|---|
| Manufacturer Part Number | 8250-1064 |
| Series | STR.T |
| Product Type | Shocks and Struts |
| Position | Rear |
| Fitment Type | Vehicle Specific |
What's Included
- One KONI component in manufacturer packaging
Mounts, springs, bump stops, dust boots, bearings, fasteners, and adjustment tools are included only when listed for the exact kit.
About KONI
KONI develops hydraulic damping products for passenger vehicles, performance applications, commercial vehicles, motorhomes, and motorsport. Product families use different adjustment methods and damping technologies, so the exact part number controls fitment and function.
Related KONI Products
- Shop KONI Suspension
- Koni Special D (Red) Shock 89-91 Avanti All - Rear
- Koni Sport (Yellow) Shock 98-05 Mazda Miata - Front
- Koni Sport (Yellow) Shock 98-05 Mazda Miata - Rear
Frequently Asked Questions
How do I confirm this KONI part fits my vehicle?
Match the complete part number, year, make, model, axle position, suspension type, drivetrain, chassis, and every exclusion or equipment note.
Is this KONI listing for one component or a complete kit?
One KONI component in manufacturer packaging. Replace dampers in axle pairs when required by the manufacturer and confirm every additional mount, spring, boot, stop, and fastener needed.
Is this KONI damper adjustable?
Adjustment depends on the exact KONI series and part number. Some products are externally adjustable, some require removal for adjustment, and others use fixed or frequency-selective damping.
Installation Instructions
- Verify the exact part number, application, position, suspension configuration, and package contents before disassembly.
- Support the vehicle safely and follow the factory service procedure for spring and damper removal.
- Transfer or replace mounts, bearings, boots, bump stops, and hardware only as specified for the application.
- Torque all fasteners at the specified suspension position and complete an alignment whenever suspension geometry is disturbed.
- Confirm clearance, fastener torque, ride height, and damper operation before normal driving.




