View vehicle applications
Fitment notes and restrictions
Description
The KONI FSD component identified by manufacturer part number 9905-1037 is supplied for the exact configuration described as KONI EVO99 w/FSD RV Front Shock Absorber 2018-2025 Freightliner S2RV (PN 9905-1037). Match the complete part number, position, suspension design, and every application requirement before ordering.
Key Features
- Longer Service Life: The increased body diameter allows for more oil volume, which aids in cooling during extended trips, outlasting competitors in high-stress applications.
- Upper and lower mounts feature 3/4-inch eyes, each 2.24 inches wide, for direct bolt-on fit without modifications.
- Unlike basic dampers that compromise on control during heavy loads, the EVO FSD design uses a larger 50mm piston-nearly 40% bigger than standard FSD models for greater oil capacity and heat dissipation, ensuring reliable performance mile after mile without fade.
- SKU: 9905 1037 Koni Freightliner S2 RV EVO FSD Front Shock Absorber for Demanding RV Roads The Koni Freightliner S2 RV EVO FSD Front Shock Absorber is designed specifically for Freightliner S2RV motorhomes from 2018 to 2025.
- Improved Stability: Large piston holes paired with a custom-tuned valve stack provide precise body control, minimizing harshness and enhancing maneuverability on winding roads or tight campsites ideal for RV drivers seeking confidence in every turn.
- This monotube shock absorber stands out with its Frequency Selective Damping (FSD) technology combined with EVO enhancements, delivering responsive handling that adapts to road conditions while maintaining a smooth ride for long hauls.
Fitment
| Years | Make | Model |
|---|---|---|
| 2018-2025 | Freightliner | S2RV |
Specifications
| Brand | KONI |
|---|---|
| Manufacturer Part Number | 9905-1037 |
| Series | FSD |
| Product Type | Shocks and Struts |
| Position | Front |
| Fitment Type | Vehicle Specific |
| Enhanced Durability | Built with 9-ton tensile strength construction, it handles the extra weight of Super C RVs better than conventional shocks, preventing premature wear on rough terrain. |
| Longer Service Life | The increased body diameter allows for more oil volume, which aids in cooling during extended trips, outlasting competitors in high-stress applications. |
| Year | 2018–2025 |
| Make | Freightliner |
| Model | S2RV (including Super C configurations) |
| One (1) Koni EVO FSD Front Shock Absorber (PN | 9905-1037, UPC: 8712167195001) |
| Collapsed Length | 14.61 inches |
| Extended Length | 22.76 inches |
| Construction | Monotube with twin-tube compatibility options |
| Part Weight | 11 pounds |
What's Included
- One KONI component in manufacturer packaging
Mounts, springs, bump stops, dust boots, bearings, fasteners, and adjustment tools are included only when listed for the exact kit.
About KONI
KONI develops hydraulic damping products for passenger vehicles, performance applications, commercial vehicles, motorhomes, and motorsport. Product families use different adjustment methods and damping technologies, so the exact part number controls fitment and function.
Related KONI Products
- Shop KONI Suspension
- Koni Special D (Red) Shock 89-91 Avanti All - Rear
- Koni Sport (Yellow) Shock 98-05 Mazda Miata - Front
- Koni Sport (Yellow) Shock 98-05 Mazda Miata - Rear
Frequently Asked Questions
How do I confirm this KONI part fits my vehicle?
Match the complete part number, year, make, model, axle position, suspension type, drivetrain, chassis, and every exclusion or equipment note.
Is this KONI listing for one component or a complete kit?
One KONI component in manufacturer packaging. Replace dampers in axle pairs when required by the manufacturer and confirm every additional mount, spring, boot, stop, and fastener needed.
Is this KONI damper adjustable?
Adjustment depends on the exact KONI series and part number. Some products are externally adjustable, some require removal for adjustment, and others use fixed or frequency-selective damping.
Installation Instructions
- Verify the exact part number, application, position, suspension configuration, and package contents before disassembly.
- Support the vehicle safely and follow the factory service procedure for spring and damper removal.
- Transfer or replace mounts, bearings, boots, bump stops, and hardware only as specified for the application.
- Torque all fasteners at the specified suspension position and complete an alignment whenever suspension geometry is disturbed.
- Confirm clearance, fastener torque, ride height, and damper operation before normal driving.




