View vehicle applications
Fitment notes and restrictions
Description
The Konig Ssm is a 18x10-inch cast aluminum wheel in Gloss Black. This exact 5x114.3 configuration uses a +15 mm offset and 73.1 mm center bore under manufacturer part number SS08514155.
Key Features
- An 18x10 wheel typically accepts tires ranging from 265 to 295 in width, depending on desired stretch.
- The SS08514155 is a street-oriented cast aluminum wheel rated to 1,518 lbs.
- The Konig SSM SS08514155 delivers a wide-body, deep-dish aesthetic in an 18x10 cast aluminum wheel with a 5x114.3 bolt pattern and ET15 offset.
- The SS08514155 pairs a bold 5-spoke layout with a deeply machined lip that catches the light and commands attention at shows and on the street.
- Built as a single-piece cast aluminum construction, the SSM line strikes the right balance of structural strength and visual impact for enthusiasts building stance-oriented or aggressive street builds.
- At 24.5 lbs, the SS08514155 provides a solid foundation for wide-fitment setups.
Fitment
This is a dimensional wheel application, not a year-make-model-specific part. Match the full 18x10-inch size, 5x114.3 bolt pattern, +15 mm offset, 73.1 mm center bore, brake clearance, load requirement, tire size, suspension, lug-seat style, and body clearance.
Specifications
| Brand | Konig |
|---|---|
| Manufacturer Part Number | SS08514155 |
| Wheel Model | Ssm |
| Construction | Cast aluminum |
| Wheel Size | 18x10 inches |
| Bolt Pattern | 5x114.3 |
| Offset | +15 mm |
| Center Bore | 73.1 mm |
| Finish | Gloss Black |
| Wheel Weight | 24.5 lb |
What's Included
One Konig Ssm wheel in the exact configuration shown. The compatible center cap is included only when supplied by Konig. Tires, lug hardware, valve stems, TPMS sensors, hub rings, mounting, and balancing are not included unless expressly stated.
About Konig
Konig manufactures cast, flow-formed, and forged performance wheels plus exact replacement wheel components. Every configuration is defined by its manufacturer part number and complete technical specifications.
Related Konig Products
- Shop all Konig wheels and accessories
- Konig SSM 18x8 5x114.3 ET35 Gloss Black w/ Machined Lip
- Konig SSM 18x8 5x114.3 ET45 Gloss Black w/ Machined Lip
- Konig SSM 18x9 5x114.3 ET22 Gloss Black w/ Machined Lip
Frequently Asked Questions
Will this 18x10 Konig wheel fit because my vehicle uses 5x114.3?
No. Also confirm the +15 mm offset, 73.1 mm center bore, brake clearance, load rating, tire size, suspension clearance, lug-seat style, and body clearance.
Is this Konig wheel sold individually or as a set?
This listing is priced and sold as one wheel. Confirm front and rear specifications before ordering the quantity required for a square or staggered setup.
What additional parts may be required?
The vehicle may require compatible lug hardware, hub-centric rings, valve stems, TPMS sensors, and tires. Match every component to the exact wheel and vehicle hub.




