-10%
Click to zoom in
Stage 8 Locking Hardware That Permanently Secures Kooks Ball and Socket Exhaust Connections
The BK114 is a Stage 8 locking bolt kit specifically for ball and socket exhaust connections, including 2 bolts and 2 nuts with the Stage 8 positive mechanical locking hardware. Ball and socket exhaust connections require a clamping bolt and nut combination that can maintain consistent clamp force through the articulating range of motion and the vibration and thermal cycling of a performance exhaust system. Standard bolts and nuts used at a ball and socket joint will work loose over time as the joint articulates and the thermal mass of the exhaust system cycles repeatedly. This bolt kit addresses this with Stage 8 locking hardware that physically prevents the bolt from backing out independent of vibration and temperature.
The BK114 kit is designed to work in conjunction with the Kooks ball and socket connections used throughout their exhaust system lineup, providing the correct fastener specification, thread engagement, and locking hardware configuration for a secure connection that does not require periodic re tightening. Whether you are installing Kooks headers and exhaust components that use ball and socket joints, or replacing worn fasteners at an existing joint, this bolt kit is the purpose specific solution from the manufacturer that designs and builds these connection systems.
Key Features
- Stage 8 positive mechanical locking system prevents bolt back out at ball and socket joints
- Includes 2 bolts and 2 nuts for a complete ball and socket connection fastener set
- Designed specifically for Kooks ball and socket exhaust connection applications
- Resists loosening from exhaust system vibration and thermal cycling
- No thread locker required
- Correct specification for Kooks ball and socket joint hardware
What's Included
- 2 x Stage 8 locking bolts
- 2 x Stage 8 locking nuts
- Stage 8 locking retainer clips
Specifications
| Specification | Detail |
|---|---|
| Part Number (MPN) | BK114 |
| UPC | Contact us for UPC |
| Contents | 2 bolts, 2 nuts with Stage 8 locking hardware |
| Locking System | Stage 8 Positive Mechanical Lock |
| Application | Kooks Ball and Socket Exhaust Connections |
| Fitment | Universal (Kooks Ball and Socket Applications) |
Frequently Asked Questions
What is this bolt kit used for?
This bolt kit is a locking bolt and nut kit for securing ball and socket exhaust connections. It is designed for use at ball and socket joints in Kooks exhaust systems where the fasteners must maintain clamp force through articulation, vibration, and thermal cycling.
Why do ball and socket fasteners loosen more than standard flange bolts?
Ball and socket connections experience constant micro movement as the joint articulates during engine and chassis movement. This continuous motion gradually releases the clamp force on conventional fasteners through a process called vibration induced loosening. Stage 8 hardware defeats this mechanism with a mechanical lock.
How does the Stage 8 locking system work at a ball and socket joint?
The Stage 8 retainer clips lock the bolt head and nut in their tightened position, preventing rotation in the loosening direction. The joint can still articulate as designed because the Stage 8 hardware only prevents rotational loosening of the fasteners, not movement of the joint itself.
Does this bolt kit include locking hardware for both the bolt and nut?
Yes. This bolt kit includes Stage 8 locking hardware for both fastener ends of the two bolt and nut sets.
Do I need thread locker with this bolt kit?
No. Stage 8 mechanical locking hardware does not require thread locking compound. The retainer clip is the anti loosening mechanism.
Can this bolt kit hardware be reused after removing the ball and socket joint?
The bolts and nuts can typically be reused if undamaged. Inspect the retainer clips for deformation and replace any that are bent or worn.
Is this bolt kit compatible with all Kooks ball and socket connections?
This bolt kit is designed for Kooks ball and socket connection hardware. Verify with Kooks that this bolt kit bolt and nut specification matches your specific ball and socket connection model before ordering.
What are the bolt dimensions in this bolt kit?
Contact us for the exact bolt dimension specification for this bolt kit. The hardware is matched to the Kooks ball and socket connection fastener requirements.
Will I need one this bolt kit kit per ball and socket joint?
Yes. One this bolt kit kit provides the hardware for a single ball and socket joint location with two fasteners. Order additional kits for each ball and socket connection in your exhaust system.
Where in the exhaust system are ball and socket connections typically located?
Ball and socket connections are commonly placed between the header collector and the mid pipe, or between the mid pipe and the muffler section, where exhaust system flexibility and vibration isolation are most beneficial.
Installation Instructions
- Confirm this bolt kit bolt and nut specification matches the ball and socket connection hardware on your Kooks exhaust system.
- Seat the ball end into the socket end of the ball and socket connection.
- Install the swivel clamp or retaining flange as required by the specific ball and socket connection design.
- Thread this bolt kit bolts through the clamping hardware and thread this bolt kit nuts by hand.
- Torque the bolts and nuts to the specification in the Kooks exhaust installation instructions.
- Install the Stage 8 retainer clips onto each bolt head and nut per Stage 8 installation instructions.
- Verify all retainer clips are fully engaged before returning the vehicle to service.
Prop 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.
Fabrication
Shop Fabrication Parts and Materials at Black Ops Auto Works for stainless steel tubing, titanium tubing, aluminum charge piping, mandrel bends, V-band clamps, flanges, merge collectors, AN fittings, PTFE hose kits, braided fuel and oil lines, heat shields, welding supplies, brackets, bungs, and hardware for building custom exhaust systems, turbo plumbing, intercooler piping, and fuel system routing. Start with tubing in stainless, titanium, or aluminum in the right diameter and wall thickness, then add mandrel bends, flanges, V-bands, and clamps to complete the joint work. Black Ops Auto Works carries 5,866 fabrication SKUs from Vibrant Performance, Ticon Industries, Stainless Bros, Radium Engineering, Fragola, DEI, and ATP Turbo. Why Custom Fabrication Custom fabrication solves fitment problems that no universal or pre-bent kit can address. Raw tubing, flanges, and fittings give the fabricator freedom to route exhaust around a turbo, snake charge pipe around accessories, hard-...
View Fabrication Products
Flanges
Exhaust flanges and V-band hardware for custom fabrication and performance exhaust builds are stocked at Black Ops Auto Works. Shop laser-cut stainless steel flanges, V-band flange pairs, OEM-pattern manifold flanges, turbo outlet flanges, and flex couplings for GM LS, Ford Coyote, Chrysler HEMI, and import turbocharged platforms. Every product is filterable by inside diameter, outside diameter, flange face style, and bolt pattern so the correct flange ships the first time. Black Ops Auto Works carries 452 flange SKUs across bolt-on and V-band styles. What This Category Covers Exhaust flanges are the bolted connection points where exhaust manifolds mate to downpipes, where sections of exhaust pipe join at catalytic converters and muffler inlets, and where aftermarket headers connect to factory or custom collector sections. Flange quality and correct material specification are critical for maintaining leak-free exhaust connections under the extreme temperature cycling that perfor...
View Flanges Products
Kooks Exhaust
Kooks Exhaust parts and accessories for American muscle cars and performance trucks are stocked at Black Ops Auto Works. Shop stainless steel long tube headers, shorty headers, catted connection pipes, mid pipes, X-pipes, H-pipes, cat-back systems, axle-back systems, resonator deletes, GREEN catalytic converters, O2 extensions, clamps and header hardware for Mustang, Camaro, Corvette, Challenger, Charger, Silverado, F-150 and Ram HEMI builds. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 174 Kooks exhaust SKUs across vehicle-specific fitment, performance upgrades, replacement parts, installation hardware and custom build needs. What This Collection Covers Kooks builds vehicle-specific stainless steel exhaust components for naturally aspirated, supercharged and turbocharged V8 street cars, track cars and HD truck builds. The range includes complete header-to-tailpipe paths as we...
View Kooks Exhaust Products