KW 2020+ Tesla Model Y AWD V1 Coilover Kit - KW S10287010
KW 2020+ Tesla Model Y AWD V1 Coilover Kit - KW S10287010
KW 2020+ Tesla Model Y AWD V1 Coilover Kit - KW S10287010
KW 2020+ Tesla Model Y AWD V1 Coilover Kit - KW S10287010
KW 2020+ Tesla Model Y AWD V1 Coilover Kit - KW S10287010
Click to zoom in
View vehicle applications

Description

The KW COILOVER KIT V1 is a coilovers identified by KW manufacturer part number 10287010. Confirm the exact vehicle configuration, factory suspension, axle load, adjustment features, and package contents before ordering.

Key Features

  • 2 rear spring and damper assemblies with height adjustment.
  • KW Toolkit for height adjustment.
  • 2 front coilover strut assemblies (threaded housing, pre-assembled).
  • Reinstall wheels, lower the vehicle, and perform a four-wheel alignment before driving.

Fitment

Years Make Model Application
2020-2025 Tesla Model Y Confirm trim, drivetrain, body style, axle load, factory suspension, and every KW application note

Specifications

Brand KW
Manufacturer Part Number 10287010
Product Type Coilovers
Fitment Type Vehicle Specific
Condition New
Customized Lowering Composite spring seat
Trapezoidal thread High-quality stainless steel housing
Tested on the 7-Post Technical com­ponent report
Weight 37.3 lb
Length 30"
Width 18"
Height 6"

What's Included

One new KW coilovers package identified by manufacturer part number 10287010. Springs, dampers, mounts, adjustment tools, cancellation modules, wiring, hardware, and other components are included only when expressly listed for this exact part number.

About KW

KW develops vehicle-specific coilovers, height-adjustable spring systems, electronic damping solutions, lift systems, suspension components, and motorsport suspension technology.

Related KW Products

Frequently Asked Questions

Does this KW coilover kit retain factory electronic damping?
That depends on the exact vehicle and kit. Confirm whether electronic-damper cancellation modules, coding, or a compatible plug-and-play system are required.

How should the ride height and damping be set?
Keep every adjustment within KW's published range for the exact part number. Start from the recommended baseline, make small equal changes, and verify suspension travel and tire clearance.

Is an alignment required after installing KW coilovers?
Yes. Any ride-height change affects suspension geometry. A professional alignment is required, and corner balancing may be appropriate for performance use.

Installation Instructions

Follow current KW instructions and the vehicle service manual for part number 10287010. Use the specified lifting, spring-compression, adjustment, and torque procedures. Verify wiring, brake and sensor lines, wheel and tire clearance, steering movement, and full suspension travel, then complete an alignment and required fastener rechecks before normal driving.

KW 2020+ Tesla Model Y AWD V1 Coilover Kit

KW
KWS10287010
840134916040
Coilovers
3 Units In Stock
$ 2,434.00
$ 2,434.00

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×