KYB 551107 Lexus GS front-left Gas-a-Just strut with hardware
Click to zoom in
View vehicle applications

Description

Restore driver-side damping while retaining the factory spring

KYB 551107 is the front-left Gas-a-Just high-pressure monotube strut for supported rear-wheel-drive Lexus GS models. It restores application-specific damping without including the coil spring or upper mount and does not apply to all-wheel-drive or adaptive control suspension configurations.

Key Features

  • KYB 551107 is matched to the verified application and configuration
  • Gas-a-Just high-pressure monotube construction resists oil aeration and damping fade
  • Vehicle-specific internal valving manages tire contact and body movement
  • Front-left position for the verified rear-wheel-drive Lexus GS applications
  • Non-adjustable damping for the supported stock-height suspension
  • Factory spring and upper mounting components transfer separately
  • Sold as one side-specific strut

Application details and restrictions

Years Make Model Verified Position and Restrictions
2006 Lexus GS300 RWD front left only; excludes AWD and adaptive control suspension.
2007-2011 Lexus GS350 RWD front left only; excludes AWD and adaptive control suspension.

Specifications

Detail Value
Manufacturer Part Number 551107
Product Line Gas-a-Just
Position Front left
Drivetrain Rear-wheel drive only
Internal Design High-pressure monotube, gas charged
Damping Adjustment Not adjustable
Extended Length 21.56 in
Compressed Length 17.50 in
Stroke Length 4.06 in
Upper Mount Stem
Lower Mount Eyelet with sleeve
Spring Included No
UPC 781552587590
Condition New

What's Included

  • One exact KYB 551107 One front-left suspension strut
  • Installed lower bushing and the position-specific hardware shown in the exact product images
  • Coil spring, upper mount, boot, bump stop, right-side strut, and alignment service are not included

About KYB

KYB engineers OE-replacement and performance dampers with application-specific valving. Gas-a-Just uses a high-pressure monotube layout to provide immediate damping response while retaining the supported vehicle's original spring and mounting architecture.

Related Parts

  • KYB 551106 is the separate front-right strut for supported applications; verify its active product page before ordering.
  • KYB 551108 is the separate rear application referenced by the manufacturer catalog; no unverified internal link is included.
  • Inspect the upper mount, spring seat, boot, bump stop, and coil spring before installation.

FAQ

What is the 551107?

It is front left gas-a-just strut for a supported 2006 Lexus GS300 RWD or 2007-2011 Lexus GS350 RWD without adaptive control suspension.

What application must be confirmed before ordering?

Confirm year, model, rear-wheel drive, front-left position, and absence of adaptive control suspension. This part is not the left-front application for AWD cars.

What is included?

The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.

Is this a universal product?

No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.

Does the listing include unrelated installation parts?

No. Only the exact component or kit identified in the included-items section is supplied.

Should existing components be inspected?

Inspect the opposite-side damper, upper mounts, boots, bump stops, coil springs, control-arm bushings, ball joints, wheel bearings, tires, and alignment condition.

Is professional installation recommended?

Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.

What should be checked after installation?

Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.

Installation Instructions

  1. Confirm KYB 551107, the application, and every listed restriction before installation.
  2. Measure ride height, record alignment condition, support the vehicle safely, and remove the wheel using the factory service procedure.
  3. Support the suspension, disconnect required brackets and links, and remove the complete strut assembly without stressing brake hoses, wiring, or steering components.
  4. Transfer only serviceable spring and mount components using an approved spring compressor and replace worn mounts, boots, bump stops, or isolators separately.
  5. Install the completed strut assembly, route all brackets and wiring correctly, and torque fasteners at the positions specified by Lexus and KYB.
  6. Inspect the opposite side, complete a professional alignment, road-test carefully, and recheck fasteners and clearances after the initial drive cycle.

KYB Gas-a-Just Front Left Strut for 2006-2011 Lexus GS

KYB
KYB551107
781552587590
Shocks and Struts
1 Units In Stock
$ 125.55
$ 125.55

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×