KYB 551106 Lexus GS front-right Gas-a-Just strut with hardware
Click to zoom in
View vehicle applications

Description

Restore passenger-side damping without changing the factory spring

KYB 551106 is a Gas-a-Just high-pressure monotube front strut for the supported Lexus GS suspension configurations. It is the front-right unit on rear-wheel-drive cars and serves the manufacturer-listed front application on supported all-wheel-drive cars, while vehicles with adaptive control suspension require a different part.

Key Features

  • KYB 551106 is matched to the verified application and configuration
  • Gas-a-Just high-pressure monotube construction separates oil and gas to resist aeration
  • Vehicle-specific valving supports steering response, tire contact, and body control
  • Front-right position on supported rear-wheel-drive Lexus GS applications
  • Manufacturer-listed front application for supported all-wheel-drive configurations
  • Factory coil spring, upper mount, and serviceable installation hardware transfer separately
  • Non-adjustable damping is calibrated for the listed stock-height application

Application details and restrictions

Years Make Model Verified Position and Restrictions
2006 Lexus GS300 Front right on RWD; manufacturer-listed front application on AWD. Excludes adaptive control suspension.
2007-2011 Lexus GS350 Front right on RWD; manufacturer-listed front application on AWD. Excludes adaptive control suspension.

Specifications

Detail Value
Manufacturer Part Number 551106
Product Line Gas-a-Just
Position Front right on RWD; front application on supported AWD
Internal Design High-pressure monotube, gas charged
Damping Adjustment Not adjustable
Extended Length 21.54 in
Compressed Length 17.48 in
Stroke Length 4.06 in
Upper Mount 12 x 1.25 mm stem
Lower Mount E2 eyelet, 14.2 x 42 mm
Spring Included No
UPC 781552587576
Condition New

What's Included

  • One exact KYB 551106 One front suspension strut
  • Installed lower bushing and the position-specific hardware shown in the exact product images
  • Coil spring, upper mount, boot, bump stop, opposite-side strut, and alignment service are not included

About KYB

KYB engineers OE-replacement and performance dampers with application-specific valving. Gas-a-Just uses a high-pressure monotube layout to provide immediate damping response while retaining the supported vehicle's original spring and mounting architecture.

Related Parts

  • KYB 551107 is the separate front-left strut for supported rear-wheel-drive applications; verify its active product page before ordering.
  • KYB 551108 is the separate rear application referenced by the manufacturer catalog; no unverified internal link is included.
  • Inspect the upper mount, spring seat, boot, bump stop, and coil spring before installation.

FAQ

What is the 551106?

It is front right gas-a-just strut for the listed 2006 Lexus GS300 and 2007-2011 Lexus GS350 configurations without adaptive control suspension.

What application must be confirmed before ordering?

Confirm year, model, drivetrain, front-right position, and absence of adaptive control suspension. AWD usage follows KYB's front application listing and must be matched to the vehicle before ordering.

What is included?

The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.

Is this a universal product?

No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.

Does the listing include unrelated installation parts?

No. Only the exact component or kit identified in the included-items section is supplied.

Should existing components be inspected?

Inspect the opposite-side damper, upper mounts, boots, bump stops, coil springs, control-arm bushings, ball joints, wheel bearings, tires, and alignment condition.

Is professional installation recommended?

Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.

What should be checked after installation?

Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.

Installation Instructions

  1. Confirm KYB 551106, the application, and every listed restriction before installation.
  2. Measure ride height, record alignment condition, support the vehicle safely, and remove the wheel using the factory service procedure.
  3. Support the suspension, disconnect required brackets and links, and remove the complete strut assembly without stressing brake hoses, wiring, or steering components.
  4. Transfer only serviceable spring and mount components using an approved spring compressor and replace worn mounts, boots, bump stops, or isolators separately.
  5. Install the completed strut assembly, route all brackets and wiring correctly, and torque fasteners at the positions specified by Lexus and KYB.
  6. Repeat inspection on the opposite side, complete a professional alignment, road-test carefully, and recheck fasteners and clearances after the initial drive cycle.

KYB Gas-a-Just Front Right Strut for 2006-2011 Lexus GS

KYB
KYB551106
781552587576
Shocks and Struts
1 Units In Stock
$ 125.55
$ 125.55

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×