Click to zoom in
Keep Your Saab 9-3 Running Clean with a Direct-Fit Catalytic Converter
The Magnaflow MAG24214 is a direct-fit catalytic converter engineered specifically for the 2003-2011 Saab 9-3 equipped with the 2.0L engine. Designed to meet or exceed Federal EPA emissions standards for OBDII-registered vehicles, the MAG24214 replicates the OE spun body design with free-flowing mandrel-bent stainless steel construction and a single laser fusion weld that minimizes the risk of exhaust leaks. No cutting or welding is required for installation.
Key Features
- MAG24214 is an EPA-compliant direct-fit replacement for the 2003-2011 Saab 9-3 2.0L
- Replicates OE spun body design for precise fitment verified with 3D scanning technology
- Mandrel-bent free-flowing tubing for improved exhaust flow versus collapsed OE replacement units
- Single laser fusion weld construction reduces the risk of exhaust leaks at the housing joint
- Corrosion-resistant stainless steel construction for long service life
- Compact, low-mass design provides greater thermal efficiency for faster catalyst light-off
- No cutting, welding, or modification required for installation
- Meets or exceeds Federal EPA emissions requirements
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2003-2011 | Saab | 9-3 | Linear |
| 2003-2011 | Saab | 9-3 | Arc |
| 2003-2011 | Saab | 9-3 | Aero |
Specifications
| Detail | Value |
|---|---|
| Part Number | MAG24214 |
| Brand | Magnaflow |
| Application | 2003-2011 Saab 9-3 2.0L |
| Type | Direct-Fit Catalytic Converter |
| Body Design | Spun Body (OE Replication) |
| Construction | Stainless Steel |
| Weld Type | Single Laser Fusion |
| Emissions Compliance | Federal / EPA OBDII |
| Installation | No Cut, No Weld Direct-Fit |
| UPC | 841380095572 |
What's Included
- 1x Magnaflow MAG24214 direct-fit catalytic converter
About Magnaflow
Magnaflow has been a leader in performance and OE-grade exhaust products since 1981. Their direct-fit catalytic converter line uses state-of-the-art 3D scanning and OE replication processes to ensure precise fitment and long-term emissions compliance. Every MAG24214 unit is built to Federal EPA standards and undergoes quality control to Magnaflow's metrology department specifications.
Frequently Asked Questions
Will the MAG24214 clear the check engine light on my 2003-2011 Saab 9-3?The MAG24214 is engineered to meet or exceed Federal EPA OBD II emissions standards. In most cases, a properly functioning catalytic converter replacement will resolve emissions-related check engine codes on the 2003-2011 Saab 9-3.
Does the MAG24214 require cutting or welding to install?No. The MAG24214 is a direct-fit design that bolts directly into the factory exhaust position on the 2003-2011 Saab 9-3 2.0L without any cutting, welding, or custom fabrication.
Is the MAG24214 legal for use in California?The MAG24214 meets Federal EPA OBDII emissions requirements but is intended for use in Federal-emissions states. California CARB-compliant converters require a separate CARB-approved unit. Check your state's emissions requirements before purchasing.
What is the OE spun body design that Magnaflow uses in the MAG24214?Magnaflow replicates the factory OE production method of spinning the converter body to create an exact-diameter match to the original equipment part. This ensures a precise fit and minimizes the risk of fitment-related exhaust leaks compared to generic universal converters.
Does the MAG24214 fit Saab 9-3 models with automatic and manual transmissions?Yes. The MAG24214 fitment is based on the engine and exhaust configuration, not the transmission. It fits both automatic and manual transmission Saab 9-3 models in the applicable year range.
How is Magnaflow's 3D scanning used to ensure MAG24214 fitment?Magnaflow's metrology department uses 3D scanning during R&D to map the exact geometry of the factory exhaust system. This ensures the MAG24214 replicates OE inlet, outlet, and bracket dimensions for a no-modification direct fit.
Does the MAG24214 come with gaskets or hardware?The MAG24214 unit does not include gaskets or hardware in the box. It is recommended to replace the exhaust gaskets and any worn hardware at the time of installation for a leak-free fit.
How long does installation take for the MAG24214 on the Saab 9-3?For a technician familiar with exhaust work, installation typically takes 1 to 2 hours. Corroded or seized fasteners may extend the job significantly. It is recommended to use penetrating lubricant on fasteners before attempting removal on older vehicles.
Installation Instructions
- Allow the exhaust system to cool completely before beginning
- Raise and safely support the vehicle for exhaust access
- Apply penetrating lubricant to all exhaust fasteners and allow to soak
- Remove the O2 sensor(s) from the original catalytic converter and set aside
- Unbolt the original converter from the flanges at both inlet and outlet connections
- Remove the old converter and compare dimensions with the MAG24214 before installing
- Install the MAG24214 in position and finger-tighten the flange bolts
- Transfer and reinstall the O2 sensor(s) into the appropriate bungs on the MAG24214
- Torque all exhaust fasteners to specification and check for leaks after startup
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Catalytic Converter Direct Fit
Direct fit catalytic converter parts and assemblies for cars, trucks, SUVs, and performance vehicles are stocked at Black Ops Auto Works. Shop direct replacement converters, front and rear converter assemblies, Y-pipes, manifold converters, federal compliant units, and high-flow upgrades for domestic and import applications. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct emissions component ships the first time. This collection covers vehicle-specific systems for HEMI, LS, LT, Coyote, EcoBoost, VQ, 2JZ, BMW, Toyota, Jeep, Ford, and GM applications. What This Direct Fit Catalytic Converter Collection Covers Vehicle specific replacement assemblies Direct fit converters match the factory exhaust routing, flange locations, oxygen sensor provisions, and hanger positions for a cleaner installation than a universal converter. Options include single converters, paired assemblies, Y-pipes, front pipes, and converter plus resonator assemblies...
View Catalytic Converter Direct Fit Products
Exhaust Systems
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products
MagnaFlow
MagnaFlow exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop MagnaFlow Street Series cat-back systems, axle-back exhausts, mufflers, direct-fit catalytic converters, resonators, and exhaust tips for Chevrolet Silverado, Ford F-150, RAM 1500, Jeep Wrangler and Gladiator, Nissan 350Z, Toyota Tacoma and Yaris, and Volkswagen and BMW platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 922 MagnaFlow SKUs across cat-back, axle-back, muffler, and catalytic converter categories. What This Brand Covers MagnaFlow is known for straight-through stainless steel mufflers, a signature deep tone, and one of the widest direct-fit vehicle applications in the aftermarket exhaust industry, including gas and diesel trucks, SUVs, muscle cars, and import platforms. Core Product Families Street Series cat-back systems deliver a bold, aggressive tone for d...
View MagnaFlow Products