BRExhaust 106-0613 Tracker and Vitara direct-fit exhaust kit front view
BRExhaust 106-0613 two-muffler exhaust kit alternate view
Click to zoom in
View vehicle applications

Description

Replace the aging exhaust from the catalyst rearward without fabrication

BRExhaust 106-0613 is a multi-piece direct-fit replacement exhaust kit for supported Chevrolet Tracker and Suzuki Vitara applications. Its aluminized-steel, mandrel-bent tubing and two-muffler layout follow the original exhaust path, while the supplied clamp, gasket, and spring-bolt hardware support a bolt-on repair.

Key Features

  • 106-0613 exact direct-fit replacement exhaust kit
  • Mandrel-bent aluminized-steel tubing
  • Two aluminized-steel mufflers
  • Factory-style OEM exit location with one round tip
  • Bolt-on multi-piece design installs without cutting or welding
  • Leaves the original emissions equipment in place
  • Two-year unlimited-mileage construction warranty subject to current terms

Application Details and Restrictions

Years Make Model Verified Application and Notes
1999-2000 Chevrolet Tracker 1.6L or 2.0L four-cylinder
2001-2003 Chevrolet Tracker 2.0L four-cylinder
1999-2001 Suzuki Vitara 1.6L or 2.0L four-cylinder
2002-2003 Suzuki Vitara 2.0L four-cylinder

Specifications

Detail Value
Manufacturer Part Number 106-0613
Series Direct-Fit Exhaust
Material Aluminized steel
Finish Satin aluminized
Main Pipe Diameter 2 inches
Muffler Quantity Two
Front Muffler Body 5 x 11 x 17.25 inches
Rear Muffler Body 3 x 3 x 7.75 inches
Exit OEM location
Tip Quantity One
Catalytic Converter Included No
OE Interchange 91175657

What's Included

  • One BRExhaust 106-0613 multi-piece exhaust system with two mufflers and connecting pipes
  • One 2.125-inch U-bolt clamp
  • One donut gasket
  • Two spring-bolt nuts and two bolts
  • Factory catalytic converter and unrelated mounting parts are not included

About BRExhaust

BRExhaust is MagnaFlow's replacement-exhaust line, focused on application-specific systems that restore factory-style fit, routing, sound control, and emissions-equipment placement with complete hardware kits where specified.

Related Parts

  • Application-correct front exhaust connection and catalytic converter inspected before installation
  • Replacement rubber exhaust isolators if the original hangers are cracked or stretched
  • Exhaust-safe anti-seize for serviceable threaded connections where permitted

FAQ

What is the 106-0613?

It is a complete BRExhaust direct-fit replacement exhaust kit for the listed Chevrolet Tracker and Suzuki Vitara applications.

Which engines fit?

Fitment depends on model year: supported 1.6L and 2.0L four-cylinder combinations are listed in the table.

Is a catalytic converter included?

No. This kit replaces the exhaust behind or near the last catalytic converter and leaves emissions equipment in place.

Does installation require welding?

No. BRExhaust specifies a bolt-on multi-piece installation without cutting or welding for the verified applications.

How many mufflers are included?

The exact kit contains two aluminized-steel mufflers.

Is installation hardware included?

Yes. The exact kit includes one U-bolt clamp, one donut gasket, two nuts, and two bolts.

What material is used?

The pipes and muffler bodies are made from aluminized steel with a satin finish.

What warranty applies?

BRExhaust lists a two-year unlimited-mileage warranty, subject to its current terms and proper application and installation.

Installation Instructions

  1. Confirm the package identifies 106-0613 and the vehicle year, make, model, and engine match the fitment table.
  2. Allow the exhaust to cool and support the vehicle at approved lift points.
  3. Inspect the catalytic-converter outlet, factory hangers, heat shields, and surrounding components before removing the original system.
  4. Remove the original exhaust while retaining only serviceable vehicle hardware that the BRExhaust instructions direct you to reuse.
  5. Assemble the supplied pipes, mufflers, gasket, spring bolts, and clamp loosely in the manufacturer-specified order.
  6. Seat all connections, align the OEM-location outlet, and confirm clearance from the body, suspension, fuel system, and heat-sensitive parts.
  7. Torque the flange hardware and U-bolt clamp to the current BRExhaust and vehicle specifications.
  8. Start the engine, inspect for leaks or contact, and recheck alignment and fastener torque after the first heat cycles.

BRExhaust Direct-Fit Exhaust Kit for 1999-2003 Tracker and Vitara

Magnaflow
MAG106-0613
888563165356
Direct-Fit Exhaust System
12 Units In Stock
$ 181.15
$ 181.15

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×