MAHLE VS50395 valve cover gasket set on white background
Click to zoom in
View vehicle applications

Description

Seal the valve-cover joint with an application-matched gasket set

MAHLE VS50395 is a vehicle-specific valve-cover gasket set for the exact applications below. It uses the published construction and included components to restore the oil seal between the valve cover and cylinder head without broadening fitment beyond the cataloged vehicles.

Key Features

  • MAHLE VS50395 is matched to the listed year, make, model and submodel applications
  • Molded rubber sealing construction
  • Standard-replacement grade for an OE-style sealing repair
  • Application-specific shape and mounting layout shown in the exact-MPN image
  • One-piece molded silicone-rubber design with a rigid carrier, sealing beads and torque limiters

Fitment

Years Make Model Submodel
2003-2007 Ford F-350 Super Duty King Ranch
2003-2007 Ford F-350 Super Duty Lariat
2003-2007 Ford F-350 Super Duty XL
2003-2007 Ford F-350 Super Duty XLT
2004-2005 Ford E-350 Club Wagon Chateau
2004-2005 Ford E-350 Club Wagon XL
2004-2005 Ford E-350 Club Wagon XLT
2004-2010 Ford E-350 Super Duty Base
2006 Ford E-350 Super Duty Chateau
2006-2008 Ford E-350 Super Duty XL
2010 Ford E-350 Super Duty XL
2004-2007 Ford F-250 Super Duty King Ranch
2003-2007 Ford F-250 Super Duty Lariat
2003-2007 Ford F-250 Super Duty XL
2003-2007 Ford F-250 Super Duty XLT
2004-2007 Ford F-350 Super Duty Harley-Davidson Edition
2006-2010 Ford E-350 Super Duty XLT
2003-2005 Ford Excursion Eddie Bauer
2003-2005 Ford Excursion Limited
2004-2005 Ford Excursion XLS
2003-2005 Ford Excursion XLT
2004-2007 Ford F-250 Super Duty Harley-Davidson Edition

Confirm the complete vehicle, engine and service-manual requirements before installation. The table is limited to the verified catalog applications carried by this product record.

Specifications

Detail Value
Manufacturer Part Number VS50395
Brand MAHLE
Product Type Valve cover gasket set
Grade Standard replacement
Material Molded rubber
Mounting Hole Quantity Not published
Oil-Fill Plug Grommet Included
PCV Valve Grommet Not published
Warranty 1 year retailer-listed warranty

What's Included

  • One MAHLE VS50395 application-specific valve-cover gasket set
  • Only the exact-product components shown and specifically listed for this part number are included
  • Valve cover, fasteners, tools and unrelated engine seals are not included unless specifically stated above

About MAHLE

MAHLE supplies OE and aftermarket engine sealing products for domestic, Asian and European applications. Its gasket sets use application-specific materials, sealing profiles and package contents selected for the cataloged engine and vehicle configuration.

Related Parts

  • Inspect the valve cover, fasteners and sealing surface before ordering replacement components
  • Use only engine seals and service hardware verified for the same vehicle and engine configuration

FAQ

What is the VS50395?

It is a MAHLE valve-cover gasket set for the applications listed in the Fitment table.

Is this a universal gasket?

No. It is vehicle specific and should be ordered only after matching the complete application and any engine restrictions.

Does the set include a valve cover?

No. This listing is for the gasket set and the specific related components identified in the What's Included and Specifications sections.

Should additional sealant be applied?

Use sealant only where the vehicle service manual or gasket instructions require it. Extra sealant can interfere with proper gasket seating.

Can old fasteners be reused?

Inspect all fasteners and follow the vehicle service procedure. Replace torque-to-yield, damaged or otherwise non-reusable hardware when required.

What should be checked before installation?

Verify the vehicle and engine, inspect the valve cover for distortion or cracks, and clean the mating surfaces without damaging them.

How should the fasteners be tightened?

Follow the factory sequence and torque specification. Uneven or excessive tightening can damage the cover or gasket.

Is professional installation recommended?

Yes. Correct diagnosis, surface preparation and torque procedure are important to prevent repeat oil leaks.

Installation Instructions

  1. Confirm the package identifies MAHLE VS50395 and the vehicle matches the Fitment table.
  2. Work on a cool engine, disconnect components required by the factory service procedure and keep debris out of the engine.
  3. Remove the valve cover, note the fastener locations and inspect the cover and sealing surfaces for damage.
  4. Remove old gasket material and clean the mating surfaces using methods approved by the vehicle manufacturer.
  5. Position the new gasket and any verified included seals without stretching, twisting or adding unapproved sealant.
  6. Install the valve cover and tighten fasteners in the factory sequence to the specified torque.
  7. Reassemble removed components, run the engine and inspect the repaired joint for oil leakage.

MAHLE Valve Cover Gasket Set for 2003-2010 Ford Trucks

Victor Reinz
VICVS50395
027067652638
Engine Valve Cover Gasket Sets
100 Units In Stock
$ 108.99
$ 108.99

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×