MAHLE VS50135 valve cover gasket set on white background
Click to zoom in
View vehicle applications

Description

Seal the valve-cover joint with an application-matched gasket set

MAHLE VS50135 is a vehicle-specific valve-cover gasket set for the exact applications below. It uses the published construction and included components to restore the oil seal between the valve cover and cylinder head without broadening fitment beyond the cataloged vehicles.

Key Features

  • MAHLE VS50135 is matched to the listed year, make, model and submodel applications
  • Molded rubber sealing construction
  • Standard-replacement grade for an OE-style sealing repair
  • Application-specific shape and mounting layout shown in the exact-MPN image

Fitment

Years Make Model Submodel
1991-1996 Ford Escort GT
1992-1993 Ford Escort LX-E
1995-1997 Kia Sephia GS
1995-1997 Kia Sephia LS
1996-1997 Kia Sephia RS
1999 Mazda Miata 10th Anniversary
1994-1997 Mazda Miata Base
1999-2000 Mazda Miata Base
2000 Mazda Miata LS
1991-1996 Mercury Tracer LTS
1994-1997 Mazda Miata M Edition
2000 Mazda Miata SE
1997 Mazda Miata STO
1990-1991 Mazda Protege 4WD
1994 Mazda Protege Base
1991-1994 Mazda Protege DX
1995-1998 Mazda Protege ES
1990-1994 Mazda Protege LX
1990 Mazda Protege SE

Confirm the complete vehicle, engine and service-manual requirements before installation. The table is limited to the verified catalog applications carried by this product record.

Specifications

Detail Value
Manufacturer Part Number VS50135
Brand MAHLE
Product Type Valve cover gasket set
Grade Standard replacement
Material Molded rubber
Thickness 8.06 mm
Mounting Hole Quantity 11
Oil-Fill Plug Grommet Not included
PCV Valve Grommet Not included
Warranty 1 year retailer-listed warranty

What's Included

  • One MAHLE VS50135 application-specific valve-cover gasket set
  • Only the exact-product components shown and specifically listed for this part number are included
  • Valve cover, fasteners, tools and unrelated engine seals are not included unless specifically stated above

About MAHLE

MAHLE supplies OE and aftermarket engine sealing products for domestic, Asian and European applications. Its gasket sets use application-specific materials, sealing profiles and package contents selected for the cataloged engine and vehicle configuration.

Related Parts

  • Inspect the valve cover, fasteners and sealing surface before ordering replacement components
  • Use only engine seals and service hardware verified for the same vehicle and engine configuration

FAQ

What is the VS50135?

It is a MAHLE valve-cover gasket set for the applications listed in the Fitment table.

Is this a universal gasket?

No. It is vehicle specific and should be ordered only after matching the complete application and any engine restrictions.

Does the set include a valve cover?

No. This listing is for the gasket set and the specific related components identified in the What's Included and Specifications sections.

Should additional sealant be applied?

Use sealant only where the vehicle service manual or gasket instructions require it. Extra sealant can interfere with proper gasket seating.

Can old fasteners be reused?

Inspect all fasteners and follow the vehicle service procedure. Replace torque-to-yield, damaged or otherwise non-reusable hardware when required.

What should be checked before installation?

Verify the vehicle and engine, inspect the valve cover for distortion or cracks, and clean the mating surfaces without damaging them.

How should the fasteners be tightened?

Follow the factory sequence and torque specification. Uneven or excessive tightening can damage the cover or gasket.

Is professional installation recommended?

Yes. Correct diagnosis, surface preparation and torque procedure are important to prevent repeat oil leaks.

Installation Instructions

  1. Confirm the package identifies MAHLE VS50135 and the vehicle matches the Fitment table.
  2. Work on a cool engine, disconnect components required by the factory service procedure and keep debris out of the engine.
  3. Remove the valve cover, note the fastener locations and inspect the cover and sealing surfaces for damage.
  4. Remove old gasket material and clean the mating surfaces using methods approved by the vehicle manufacturer.
  5. Position the new gasket and any verified included seals without stretching, twisting or adding unapproved sealant.
  6. Install the valve cover and tighten fasteners in the factory sequence to the specified torque.
  7. Reassemble removed components, run the engine and inspect the repaired joint for oil leakage.

MAHLE Valve Cover Gasket Set for Ford, Kia and Mazda

Victor Reinz
VICVS50135
725975438442
Engine Valve Cover Gasket Sets
189 Units In Stock
$ 36.49
$ 36.49

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×