Method MR318 machined wheel angled front view
Method MR318 machined wheel face view
Method MR318 machined wheel angled rear view
Click to zoom in
View vehicle applications

Description

Set a clean truck stance with verified wheel dimensions

Method Wheels MR31889060318 brings the MR318 multi-spoke design to a machined clear-coat finish with a 6x139.7 bolt pattern and truck-rated dimensions. Correct selection depends on matching every listed measurement, not bolt pattern alone.

Key Features

  • Solid A356 cast aluminum with T6 heat treatment
  • MR318 multi-spoke design with debossed METHOD branding
  • Machined silver finish protected by clear coat
  • Snap-in chrome TOPO center cap with embossed Method logo
  • One-piece non-beadlock construction
  • TPMS sensor compatible

Fitment

Application Type Requirements
Dimension-based wheel fitment Dimension-based fitment only. No year-make-model application is assigned. Confirm 18x9 size, 6x139.7 bolt pattern, +18mm offset, 5.66-inch backspacing, 106.25mm center bore, 2,650 lb load requirement, 60-degree conical-seat lug hardware, brake and suspension clearance, tire size, and fender clearance before mounting.

This wheel is not assigned to a year-make-model application. A shared 6x139.7 bolt pattern does not confirm fitment by itself.

Specifications

Detail Value
Manufacturer Part Number MR31889060318
Series MR318 Standard
Quantity One wheel
Diameter x Width 18 x 9 inches
Bolt Pattern 6x139.7 mm (6x5.5 inches)
Offset +18 mm
Backspacing 5.66 inches
Center Bore 106.25 mm
Load Rating 2,650 lb
Weight Approximately 31.2 lb
Material A356 cast aluminum with T6 heat treatment
Construction One-piece, non-beadlock
Finish Machined silver with clear coat
Lug Seat 60-degree conical
TPMS Compatible Yes

What's Included

  • One Method MR318 machined clear-coat wheel
  • One snap-in chrome TOPO center cap
  • Tire, TPMS sensor, valve stem, lug hardware, mounting, balancing, and vehicle-specific hub rings are not included

About Method Wheels

Method Race Wheels develops off-road and street wheel designs around application-specific dimensions, structural load requirements, and serviceable accessories. The Standard Series uses conventional one-piece construction for road and trail vehicles.

Related Parts

  • Vehicle-correct 60-degree conical-seat lug hardware
  • A compatible TPMS sensor and valve stem
  • A tire selected for the 18x9 wheel, vehicle load, suspension, and available body clearance

FAQ

What is the MR31889060318?

It is one MR318 Standard Series cast-aluminum wheel in the machined clear-coat configuration and exact dimensions listed here.

Is this listing for one wheel or a set?

It is sold individually. Order the quantity required for the vehicle and confirm every wheel position uses the intended specification.

Which vehicles does this wheel fit?

No year-make-model fitment is assigned from the dimensions alone. Confirm the complete hub, bolt pattern, offset, load, brake, tire, suspension, and body-clearance requirements for the specific vehicle.

Are lug nuts included?

No. Use compatible 60-degree conical-seat lug hardware with the correct thread size and engagement for the vehicle.

Is the center cap included?

Yes. The manufacturer specifies a snap-in chrome TOPO center cap for this six-lug configuration.

Are a tire, TPMS sensor, and valve stem included?

No. The listing is for one wheel and center cap; the tire, TPMS sensor, valve stem, mounting, balancing, and lug hardware are not included.

Is this a beadlock wheel?

No. This MR318 Standard Series configuration is a conventional one-piece cast wheel with no beadlock.

What must be checked before mounting a tire?

Verify the bolt pattern, center bore, offset, backspacing, brake and suspension clearance, tire dimensions, load capacity, lug-seat style, fender clearance, and vehicle manufacturer requirements.

What warranty does Method provide?

Method identifies a lifetime structural warranty for its Standard Series wheels. Warranty eligibility and exclusions remain subject to the manufacturer's current written terms.

Installation Instructions

  1. Confirm the package and wheel marking identify the exact MR318 size, bolt pattern, offset, and finish before mounting a tire.
  2. Test-fit the bare wheel to verify hub seating, center-bore relationship, brake clearance, suspension clearance, and full steering movement.
  3. Confirm the vehicle load requirement does not exceed the wheel's 2,650 lb rating and select a compatible tire with adequate load capacity.
  4. Install a compatible valve stem and TPMS sensor, then have the tire mounted and dynamically balanced by a qualified wheel and tire shop.
  5. Use only vehicle-correct 60-degree conical-seat lug hardware with sufficient thread engagement.
  6. Tighten lug hardware in the vehicle manufacturer's sequence and to its specified torque using a calibrated torque wrench.
  7. Verify tire, brake, suspension, steering, and body clearance through the complete operating range before normal driving.
  8. Recheck lug torque after the initial driving interval specified by the wheel or vehicle manufacturer.

Method MR318 18x9 6x139.7 +18 Machined Clear Coat Wheel

Method Wheels
MRWMR31889060318
191682041709
Wheels - Cast
19 Units In Stock
$ 404.35

Price per wheel — sold individually. Quantity 1 = one wheel.

$ 404.35

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×