-15%
Mishimoto MMHOSE-X35T-18BK black upper and lower coolant hose kit
Mishimoto black silicone coolant hose construction close-up
Mishimoto black silicone coolant hose connector close-up
Mishimoto black upper and lower Ford coolant hoses
Click to zoom in
View vehicle applications

Description

Replace leak-prone molded connectors with reinforced coolant hoses

Mishimoto MMHOSE-X35T-18BK is a black silicone upper-and-lower coolant hose kit for the supported Ford 3.5-liter EcoBoost applications. Five-layer silicone, heat-resistant fibers, metal replacement connectors, and included clamps address aging factory hose and connector assemblies.

Key Features

  • Mishimoto MMHOSE-X35T-18BK includes upper and lower coolant hoses
  • Five-layer silicone with heat-resistant fibers
  • Black finish
  • Stainless-steel and aluminum replacement connectors
  • Maximum temperature rating of 330 degrees Fahrenheit
  • Five worm-gear clamps included
  • Mishimoto lifetime warranty under current terms

Fitment

Years Make Model Engine and Verified Trims
2018-2020 Ford F-150 3.5L EcoBoost; King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL, and XLT
2018-2021 Ford Expedition 3.5L EcoBoost; verified King Ranch, Limited, Platinum, SSV, XL, XLT, and Max variants by listed years

Specifications

Detail Value
Manufacturer Part Number MMHOSE-X35T-18BK
Product Type Silicone coolant hose kit
Color Black
Material Five-layer silicone with heat-resistant fibers
Maximum Temperature 330 degrees F
Clamp Torque 22 in-lb recommended; do not exceed 27 in-lb
Hoses Upper and lower
Clamps Five worm-gear clamps
UPC 811580038891

What's Included

  • One Mishimoto MMHOSE-X35T-18BK upper coolant hose with CNC-machined aluminum connector
  • One lower coolant hose with stainless-steel connector and quick disconnect
  • Five worm-gear clamps

About Mishimoto

Mishimoto develops replacement and performance cooling components. Its application-specific silicone kits combine reinforced hose construction with formed connectors and documented clamp limits for the matching factory cooling circuit.

Related Parts

  • No internal radiator, thermostat, coolant, reservoir, or auxiliary hose is linked because every cooling component must match the exact Ford model, engine, trim, and routing.

FAQ

What is the MMHOSE-X35T-18BK?

It is a black upper-and-lower silicone coolant hose kit for the supported Ford 3.5-liter EcoBoost applications.

Does it fit every F-150?

No. It is limited to the verified 2018-2020 3.5-liter EcoBoost trims shown in the fitment table.

Does it fit the Expedition?

Yes, for the verified 2018-2021 3.5-liter EcoBoost standard and Max trim applications listed by year.

What hoses are included?

The exact kit includes the upper and lower coolant hoses.

Are clamps included?

Yes. Five worm-gear clamps are included.

What replaces the factory plastic connectors?

The kit uses stainless-steel and CNC-machined aluminum connector components.

What is the clamp torque limit?

The published recommendation is 22 inch-pounds, with a maximum of 27 inch-pounds.

What should be checked after installation?

Bleed the system, verify connector engagement and clamp torque, inspect all routing and clearances, and pressure-test for leaks through a complete heat cycle.

Installation Instructions

  1. Confirm the Ford model, model year, 3.5-liter EcoBoost engine, listed trim, black finish, and Mishimoto MMHOSE-X35T-18BK.
  2. Allow the engine to cool completely, relieve pressure safely, and drain enough coolant to service the upper and lower hoses.
  3. Document the factory routing and connector positions, then remove the original hoses without damaging radiator, engine, or reservoir fittings.
  4. Install the formed hoses and metal connectors in the original routing with no twists, kinks, abrasion points, or contact with heat and moving parts.
  5. Position the five clamps behind the fitting beads and tighten to 22 inch-pounds without exceeding the 27 inch-pound maximum.
  6. Refill and bleed the cooling system, pressure-test every connection, verify operating temperature, and recheck clamp position and coolant level after the first heat cycle.

California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Mishimoto Black Coolant Hose Kit for 2018-2021 Ford 3.5L EcoBoost

Mishimoto
MISMMHOSE-X35T-18BK
811580038891
Radiator Hoses
8 Units In Stock
$ 339.00 $ 284.84
$ 284.84

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×